Skip to contentSkip to conversation

compile error in ieee80211_ioctl.c

PATCH In review Alex Davis 4 participants 7 messages Apr 25, 2006 – May 5, 2006

Subsystems (2)
lore
Share & tools
lore

Alex Davis

author
#0 lore raw

PATCH 1/1 compile error in ieee80211_ioctl.c

Hello:

I sent this patch earlier and got no response, so I'm sending it again.

I cloned git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
last night and got compile errors while compiling net/d80211/ieee80211_ioctl.c into a module:

CC [M] net/d80211/ieee80211_ioctl.o
net/d80211/ieee80211_ioctl.c:33: error: syntax error before string constant net/d80211/ieee80211_ioctl.c:33: warning: type defaults to int' in declaration of MODULE_PARM' net/d80211/ieee80211_ioctl.c:33: warning: function declaration isn't a prototype net/d80211/ieee80211_ioctl.c:33: warning: data definition has no type or storage class net/d80211/ieee80211_ioctl.c:43: error: syntax error before string constant net/d80211/ieee80211_ioctl.c:43: warning: type defaults to int' in declaration of MODULE_PARM' net/d80211/ieee80211_ioctl.c:43: warning: function declaration isn't a prototype net/d80211/ieee80211_ioctl.c:43: warning: data definition has no type or storage class make[2]: *** [net/d80211/ieee80211_ioctl.o] Error 1
make[1]: *** [net/d80211] Error 2
make: *** [net] Error 2

This patch fixes it.

net/d80211/ieee80211_ioctl.c +2 -2
index 42a7abe..4949e52 100644
@@ -30,7 +30,7 @@ #include "aes_ccm.h"
 
 
 static int ieee80211_regdom = 0x10; /* FCC */
-MODULE_PARM(ieee80211_regdom, "i");
+module_param(ieee80211_regdom, int, 0x10);
 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");
 
 /*
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE
  * module.
  */
 static int ieee80211_japan_5ghz /* = 0 */;
-MODULE_PARM(ieee80211_japan_5ghz, "i");
+module_param(ieee80211_japan_5ghz, int, 0);
 MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz");
 

I code, therefore I am

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#1 lore raw
Quoted 3 lines · On Tue, 25 Apr 2006 14:04:50 -0700 (PDT) Alex Davis wrote:

Hello:

I sent this patch earlier and got no response, so I'm sending it again.

There was at least one reply, from me.

The third parameter of module_param() is being misused in your patch. It represents a "permission" value, such as 0, 0444, 0644, etc. Or you can use existing #defined values for it.

Quoted 35 lines

I cloned git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
last night and got compile errors while compiling net/d80211/ieee80211_ioctl.c into a module:

CC [M] net/d80211/ieee80211_ioctl.o
net/d80211/ieee80211_ioctl.c:33: error: syntax error before string constant net/d80211/ieee80211_ioctl.c:33: warning: type defaults to int' in declaration of MODULE_PARM' net/d80211/ieee80211_ioctl.c:33: warning: function declaration isn't a prototype net/d80211/ieee80211_ioctl.c:33: warning: data definition has no type or storage class net/d80211/ieee80211_ioctl.c:43: error: syntax error before string constant net/d80211/ieee80211_ioctl.c:43: warning: type defaults to int' in declaration of MODULE_PARM' net/d80211/ieee80211_ioctl.c:43: warning: function declaration isn't a prototype net/d80211/ieee80211_ioctl.c:43: warning: data definition has no type or storage class make[2]: *** [net/d80211/ieee80211_ioctl.o] Error 1
make[1]: *** [net/d80211] Error 2
make: *** [net] Error 2

This patch fixes it.

net/d80211/ieee80211_ioctl.c +1 -1
index 42a7abe..4949e52 100644
@@ -30,7 +30,7 @@ #include "aes_ccm.h"
 
 
 static int ieee80211_regdom = 0x10; /* FCC */
-MODULE_PARM(ieee80211_regdom, "i");
+module_param(ieee80211_regdom, int, 0x10);
 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");
 
 /*

net/d80211/ieee80211_ioctl.c MODULE_PARM_DESC(ieee80211_regdom, "IEEE · line 44

Quoted 6 lines
net/d80211/ieee80211_ioctl.c +1 -1
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE
  * module.
  */
 static int ieee80211_japan_5ghz /* = 0 */;
-MODULE_PARM(ieee80211_japan_5ghz, "i");
+module_param(ieee80211_japan_5ghz, int, 0);
 MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz");

---
~Randy

#2 lore raw
In reply to Alex Davis
Quoted 8 lines · Alex Davis

Hello:

I sent this patch earlier and got no response, so I'm sending it again.

I cloned git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
last night and got compile errors while compiling net/d80211/ieee80211_ioctl.c into a module:

You may want to wait a little longer before getting huffy...your original post was on Sunday afternoon (<48 hours ago). You need to address Randy's concerns as well.

Thanks,

John

Signature · 2 lines
John W. Linville
[email protected]
author
#3 lore raw
Quoted 10 lines · --- "John W. Linville
Quoted 8 lines · Alex Davis

Hello:

I sent this patch earlier and got no response, so I'm sending it again.

I cloned git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
last night and got compile errors while compiling net/d80211/ieee80211_ioctl.c into a module:

Quoted 5 lines

You need to address Randy's concerns as well.

Thanks,

John

Here is an updated patch which addresses Randy's issues. I'm currently running this with no problems:

net/d80211/ieee80211_ioctl.c +2 -2
index 42a7abe..1b14e6c 100644
@@ -30,7 +30,7 @@ #include "aes_ccm.h"
 
 
 static int ieee80211_regdom = 0x10; /* FCC */
-MODULE_PARM(ieee80211_regdom, "i");
+module_param(ieee80211_regdom, int, 0666);
 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");
 
 /*
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE
  * module.
  */
 static int ieee80211_japan_5ghz /* = 0 */;
-MODULE_PARM(ieee80211_japan_5ghz, "i");
+module_param(ieee80211_japan_5ghz, int, 0666);
 MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz");
 
 
Quoted 3 lines

John W. Linville
[email protected]

I code, therefore I am

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#4 lore raw
Quoted 5 lines · Alex Davis

Here is an updated patch which addresses Randy's issues. I'm currently running this with no problems:
[...]
+module_param(ieee80211_regdom, int, 0666);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");

NAK. Those parameters should not be writable yet.

Please see
http://marc.theaimsgroup.com/?l=linux-netdev&m=114565040832451&w=2 for the correct patch (hopefully John will pull it soon).

Jiri

Signature · 2 lines
Jiri Benc
SUSE Labs
#5 lore raw
Quoted 7 lines · Jiri Benc
Quoted 5 lines · Alex Davis

Here is an updated patch which addresses Randy's issues. I'm currently running this with no problems:
[...]
+module_param(ieee80211_regdom, int, 0666);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");

Quoted 5 lines

NAK. Those parameters should not be writable yet.

Please see
http://marc.theaimsgroup.com/?l=linux-netdev&m=114565040832451&w=2 for the correct patch (hopefully John will pull it soon).

This has now been addressed.

Thanks!

John

Signature · 2 lines
John W. Linville
[email protected]
author
#6 lore raw

iwconfig shows Encrypt key off when using WEP.

I'm using the latest wireless dev git. wireless tools version 28. wpa_supplicant 0.4.8 .

Here's the output of iwconfig wlan0:

wlan0     IEEE 802.11g  ESSID:"mysid"
          Mode:Managed  Frequency:2.437 GHz  Access Point: xx:xx.....
          RTS thr:off   Fragment thr=2346 B

Encryption key:off <--- should be 'on'

Here's lspci -v:

2:03.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g (rev 03)
Subsystem: Dell Truemobile 1450 MiniPCI
Flags: bus master, fast devsel, latency 32, IRQ 7
Memory at fafee000 (32-bit, non-prefetchable) [size=8K]

Here's the dmesg output from loading the module:

21428.599628] bcm43xx_d80211 driver

[21428.609511] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[21428.615559] bcm43xx_d80211: Chip ID 0x4306, rev 0x3
[21428.615561] bcm43xx_d80211: Number of cores: 5
[21428.615566] bcm43xx_d80211: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled
[21428.615574] bcm43xx_d80211: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled
[21428.615582] bcm43xx_d80211: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled
[21428.615590] bcm43xx_d80211: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled
[21428.615597] bcm43xx_d80211: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled
[21428.618895] bcm43xx_d80211: PHY connected
[21428.618907] bcm43xx_d80211: Detected PHY: Version: 2, Type 2, Revision 2
[21428.618928] bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
[21428.618943] bcm43xx_d80211: Radio turned off
[21428.618970] bcm43xx_d80211: Radio turned off
[21428.689486] wmaster0: Selected rate control algorithm 'simple'
[21428.789510] bcm43xx_d80211: PHY connected
[21428.992261] bcm43xx_d80211: Radio turned on
[21429.186760] bcm43xx_d80211: Chip initialized
[21429.186974] bcm43xx_d80211: DMA initialized
[21429.186985] bcm43xx_d80211: 80211 cores initialized
[21429.187199] bcm43xx_d80211: Keys cleared
[21429.187239] wmaster0: Does not support passive scan, disabled

Here's my wep.conf file:
# Static WEP keys

ctrl_interface=/var/run/wpa_supplicant

network={
        ssid="mysid"
        auth_alg=OPEN
        key_mgmt=NONE
        wep_key0=111111919191919191919
        wep_tx_keyidx=0
}

Here's the wpa_supplicant command:
wpa_supplicant -D wext -c ~/wep.conf -i wlan0

Other than that, it's been working perfectly.

Thanks

I code, therefore I am

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com