cpufreq oddness on 2.6.16-rc1-mm4
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Andrew Morton
Quoted 3 lines · Andy Isaacson
Quoted 1 line · Andrew Morton
git-cpufreq.patch
Quoted 8 lines
Quoted 5 lines
I haven't had time to debug it further, but cpufreq seems broken on my Thinkpad X40 with 2.6.16-rc1-mm4. It was working fine with 2.6.15-rc5-mm3. Automatic scaling doesn't function any more - my PentiumM 1.4 GHz is fixed at 598 MHz. And the relevant knobs in
/sys/devices/system/cpu/cpu0seem to be missing. Admittedly, I don'tIf this bug is still present in 2.6.17-rc3, could you please raise a report at bugzilla.kernel.org so we can track it?
It turned out to be a configuration issue (as expected). My routine of "cp ../uname -r/.config .config; make oldconfig" did not do the right thing when doing that upgrade - I ended up with
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not setCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
which resulted in speedstep being disabled with no obvious clues what to do to turn it on. After some poking, I'm now running 2.6.17-rc1-mm3 with
CONFIG_CPU_FREQ_GOV_ONDEMAND=mCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
and everything is working fine.
-andy