Skip to contentSkip to conversation

cpufreq oddness on 2.6.16-rc1-mm4

DISCUSSION Andy Isaacson 1 participant 1 message May 4, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 4 lines · Andrew Morton
Quoted 3 lines · Andy Isaacson
Quoted 1 line · Andrew Morton

git-cpufreq.patch

Quoted 8 lines
Quoted 5 lines

I haven't had time to debug it further, but cpufreq seems broken on my Thinkpad X40 with 2.6.16-rc1-mm4. It was working fine with 2.6.15-rc5-mm3. Automatic scaling doesn't function any more - my PentiumM 1.4 GHz is fixed at 598 MHz. And the relevant knobs in /sys/devices/system/cpu/cpu0 seem to be missing. Admittedly, I don't

If this bug is still present in 2.6.17-rc3, could you please raise a report at bugzilla.kernel.org so we can track it?

It turned out to be a configuration issue (as expected). My routine of "cp ../uname -r/.config .config; make oldconfig" did not do the right thing when doing that upgrade - I ended up with

# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y

which resulted in speedstep being disabled with no obvious clues what to do to turn it on. After some poking, I'm now running 2.6.17-rc1-mm3 with

CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y

and everything is working fine.

-andy