Skip to contentSkip to conversation

remove dead entry in net wan Kconfig

PATCH In review Paul Fulghum 2 participants 4 messages May 12, 2006 – May 16, 2006 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 remove dead entry in net wan Kconfig

Remove dead entry from net wan Kconfig. This entry is left over from 2.4 where synclink used syncppp driver directly. synclink drivers now use generic HDLC

drivers/net/wan/Kconfig +0 -12
@@ -134,18 +134,6 @@
 	  The driver will be compiled as a module: the
 	  module will be called sealevel.
 
-config SYNCLINK_SYNCPPP
-	tristate "SyncLink HDLC/SYNCPPP support"
-	depends on WAN
-	help
-	  Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-
-	  Normally the SyncLink WAN driver works with the main PPP driver
-	  <file:drivers/net/ppp_generic.c> and pppd program.
-	  HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
-	  <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
-	  character devices) must also be enabled.
-
 # Generic HDLC
 config HDLC
 	tristate "Generic HDLC layer"
#1 lore raw
Quoted 4 lines · Paul Fulghum

Remove dead entry from net wan Kconfig. This entry is left over from 2.4 where synclink used syncppp driver directly. synclink drivers now use generic HDLC

What about also removing the entry for this option in the Makefile?

Quoted 13 lines
drivers/net/wan/Kconfig +0 -5
@@ -134,18 +134,6 @@
 	  The driver will be compiled as a module: the
 	  module will be called sealevel.
 
-config SYNCLINK_SYNCPPP
-	tristate "SyncLink HDLC/SYNCPPP support"
-	depends on WAN
-	help
-	  Enables HDLC/SYNCPPP support for the SyncLink WAN driver.

drivers/net/wan/Kconfig line 139

Quoted 10 lines
drivers/net/wan/Kconfig +0 -7
-
-	  Normally the SyncLink WAN driver works with the main PPP driver
-	  <file:drivers/net/ppp_generic.c> and pppd program.
-	  HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
-	  <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
-	  character devices) must also be enabled.
-
 # Generic HDLC
 config HDLC
 	tristate "Generic HDLC layer"

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#2 lore raw
Quoted 1 line · Adrian Bunk

What about also removing the entry for this option in the Makefile?

Good point, I'll do that.

Signature · 2 lines
Paul Fulghum
Microgate Systems, Ltd.
#3 lore raw

PATCH 1/1 remove dead entry in net wan Makefile

Remove dead entry in net wan Makefile.
Entry is left over from 2.4 when synclink used syncppp. synclink drivers now use generic HDLC

drivers/net/wan/Makefile +0 -1
@@ -36,7 +36,6 @@
 obj-$(CONFIG_FARSYNC)		+=		syncppp.o	farsync.o
 obj-$(CONFIG_DSCC4)             +=				dscc4.o
 obj-$(CONFIG_LANMEDIA)		+=		syncppp.o
-obj-$(CONFIG_SYNCLINK_SYNCPPP)	+=		syncppp.o
 obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/