Skip to contentSkip to conversation

ftdi_sio driver - new PIDs

PATCH Jonathan Davies 1 participant 1 message Aug 9, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · Greg KH
Quoted 3 lines · Jonathan Davies
Quoted 2 lines

Your patch is line-wrapped and the tabs are eaten, making it hard to apply the patch :(

Sorry; I'll try again with a different mail client!

Closer, the tabs are now fine, but the patch is line-wrapped, and you are using a mime email, which means I can't directly apply the patch...

Time to try a third mail client.

Quoted 1 line

Care to try again, third time's the charm :)

Here we go again:

drivers/usb/serial/ftdi_sio.c +2 -0
diff -uprN -X linux-2.6.18-rc3-vanilla/Documentation/dontdiff linux-2.6.18-rc3-vanilla/drivers/usb/serial/ftdi_sio.c linux-2.6.18-rc3/drivers/usb/serial/ftdi_sio.c
@@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIR
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
drivers/usb/serial/ftdi_sio.h +6 -0
diff -uprN -X linux-2.6.18-rc3-vanilla/Documentation/dontdiff linux-2.6.18-rc3-vanilla/drivers/usb/serial/ftdi_sio.h linux-2.6.18-rc3/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,12 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* www.canusb.com Lawicel CANUSB device */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID	0xF2D0