ftdi_sio driver - new PIDs
Subsystems (2)
Quoted 7 lines · Greg KH
Quoted 3 lines · Jonathan Davies
Quoted 2 lines
Your patch is line-wrapped and the tabs are eaten, making it hard to apply the patch :(
Sorry; I'll try again with a different mail client!
Closer, the tabs are now fine, but the patch is line-wrapped, and you are using a mime email, which means I can't directly apply the patch...
Time to try a third mail client.
Quoted 1 line
Care to try again, third time's the charm :)
Here we go again:
Signed-off-by Jonathan Davies <[email protected]>
drivers/usb/serial/ftdi_sio.c +2 -0
@@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRstatic struct usb_device_id id_table_combined [] = { + {USB_DEVICE (FTDI_VID ,FTDI_AMC232_PID ) }, + {USB_DEVICE (FTDI_VID ,FTDI_CANUSB_PID ) }, {USB_DEVICE (FTDI_VID ,FTDI_ACTZWAVE_PID ) }, {USB_DEVICE (FTDI_VID ,FTDI_IRTRANS_PID ) }, {USB_DEVICE (FTDI_VID ,FTDI_IPLUS_PID ) },
drivers/usb/serial/ftdi_sio.h +6 -0
@@ -32,6 +32,12 @@#define FTDI_NF_RIC_PID 0x0001/* Product Id */ +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8/* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00/* Product Id */ +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0