PPC440 and CONFIG_BOOKE
I'm porting u-boot to a new piece of hardware using a 440GX processor. My hardware looks a little bit like an Ocotea board so I'm using this as my starting point.
The Ocotea configuration (and the other PPC4xx boards) doesn't define CONFIG_BOOKE in the config file. The 440GX is a Book-E processor, this appears to define some of the SPRNs incorrectly.
Is this done intentionally?
thanks,
jeff
Hi Jeff,
Quoted 3 lines · Jeff Mock
I'm porting u-boot to a new piece of hardware using a 440GX processor. My hardware looks a little bit like an Ocotea board so I'm using this as my starting point.
OK.
Quoted 5 lines
The Ocotea configuration (and the other PPC4xx boards) doesn't define
CONFIG_BOOKEin the config file. The 440GX is a Book-E processor, this appears to define some of the SPRNs incorrectly.Is this done intentionally?
The first 440 U-Boot ports (including Ocotea) where done, long before the CONFIG_BOOKE define was added to U-Boot. All needed SPRN's should be defined in include/ppc440.h.
Please let me know, if you spot a problem with any PPC4xx register definitions.
Best regards,
Stefan