Skip to contentSkip to conversation

PPC440 and CONFIG_BOOKE

U-Boot-Users Jeff Mock 2 participants 2 messages Sep 24, 2006 – Sep 25, 2006

lore
Share & tools
lore

Jeff Mock

author
#0 lore raw

I'm porting u-boot to a new piece of hardware using a 440GX processor. My hardware looks a little bit like an Ocotea board so I'm using this as my starting point.

The Ocotea configuration (and the other PPC4xx boards) doesn't define CONFIG_BOOKE in the config file. The 440GX is a Book-E processor, this appears to define some of the SPRNs incorrectly.

Is this done intentionally?

thanks,
jeff

#1 lore raw

Hi Jeff,

Quoted 3 lines · Jeff Mock

I'm porting u-boot to a new piece of hardware using a 440GX processor. My hardware looks a little bit like an Ocotea board so I'm using this as my starting point.

OK.

Quoted 5 lines

The Ocotea configuration (and the other PPC4xx boards) doesn't define CONFIG_BOOKE in the config file. The 440GX is a Book-E processor, this appears to define some of the SPRNs incorrectly.

Is this done intentionally?

The first 440 U-Boot ports (including Ocotea) where done, long before the CONFIG_BOOKE define was added to U-Boot. All needed SPRN's should be defined in include/ppc440.h.

Please let me know, if you spot a problem with any PPC4xx register definitions.

Best regards,
Stefan