fix via586 irq routing for pirq 5
PATCH 1/1 fix via586 irq routing for pirq 5
( for 2.6.19, and i think it would be good for -stable too... )
[PATCH] fix via586 irq routing for pirq 5
fix interrput routing for via 586 bridges. pirq can be 5 which needs to be mapped to INTD. but currently the access functions can handle only pirq 1-4. this is similar to the other via chipsets where pirq 4 and 5 are both mapped to INTD. fixes bugzilla #7490
Cc Daniel Paschka <[email protected]>
Cc Adrian Bunk <[email protected]>
Signed-off-by Daniel Ritz <[email protected]>
arch/i386/pci/irq.c +2 -2
@@ -255,13 +255,13 @@ static int pirq_via_set(struct pci_dev **/ static int pirq_via586_get (struct pci_dev *router,struct pci_dev *dev,int pirq) { -static const unsigned int pirqmap[4 ] = {3 ,2 ,5 ,1 }; +static const unsigned int pirqmap[5 ] = {3 ,2 ,5 ,1 ,1 };return read_config_nybble (router,0x55 , pirqmap[pirq-1 ]); }static int pirq_via586_set (struct pci_dev *router,struct pci_dev *dev,int pirq,int irq) { -static const unsigned int pirqmap[4 ] = {3 ,2 ,5 ,1 }; +static const unsigned int pirqmap[5 ] = {3 ,2 ,5 ,1 ,1 };write_config_nybble (router,0x55 , pirqmap[pirq-1 ], irq);return 1 ; }
Quoted 1 line · On Sun, 12 Nov 2006 00:52:44 +0100 Daniel Ritz <[email protected]>…
( for 2.6.19, and i think it would be good for -stable too... )
Yup.
Quoted 1 line
[PATCH] fix via586 irq routing for pirq 5
Thanks very much for working this one out. Most impressive.