Skip to contentSkip to conversation

fix via586 irq routing for pirq 5

PATCH In review Daniel Ritz 2 participants 2 messages Nov 11, 2006 – Nov 12, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fix via586 irq routing for pirq 5

( for 2.6.19, and i think it would be good for -stable too... )

[PATCH] fix via586 irq routing for pirq 5

fix interrput routing for via 586 bridges. pirq can be 5 which needs to be mapped to INTD. but currently the access functions can handle only pirq 1-4. this is similar to the other via chipsets where pirq 4 and 5 are both mapped to INTD. fixes bugzilla #7490

Cc Daniel Paschka <[email protected]>
Cc Adrian Bunk <[email protected]>
arch/i386/pci/irq.c +2 -2
index dbc4aae..567126b 100644
@@ -255,13 +255,13 @@ static int pirq_via_set(struct pci_dev *
  */
 static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
-	static const unsigned int pirqmap[4] = { 3, 2, 5, 1 };
+	static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
 	return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
 }
 
 static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	static const unsigned int pirqmap[4] = { 3, 2, 5, 1 };
+	static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
 	write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
 	return 1;
 }
#1 lore raw
Quoted 1 line · On Sun, 12 Nov 2006 00:52:44 +0100 Daniel Ritz <[email protected]>…

( for 2.6.19, and i think it would be good for -stable too... )

Yup.

Quoted 1 line

[PATCH] fix via586 irq routing for pirq 5

Thanks very much for working this one out. Most impressive.