Skip to contentSkip to conversation

Add driver for OHCI firewire host controllers.

PATCH In review Kristian Høgsberg 1 participant 1 message Dec 20, 2006 Firewire

lore
Share & tools
lore
#0 lore raw

PATCH 3/4 Add driver for OHCI firewire host controllers.

---
 drivers/firewire/Kconfig   |   11 
 drivers/firewire/Makefile  |    1 
 drivers/firewire/fw-ohci.c | 1394 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/firewire/fw-ohci.h |  152 +++++
 4 files changed, 1558 insertions(+), 0 deletions(-)
drivers/firewire/Kconfig +11 -0
index bdd6303..b386334 100644
@@ -20,4 +20,15 @@ config FW
 	  To compile this driver as a module, say M here: the
 	  module will be called fw-core.
 
+config FW_OHCI
+	tristate "Support for OHCI firewire host controllers"
+	depends on PCI && FW
+	help
+	  Enable this driver if you have an firewire controller based
+	  on the OHCI specification.  For all practical purposes, this
+	  is the only chipset in use, so say Y here.
+
+	  To compile this driver as a module, say M here: the
+	  module will be called fw-ohci.
+
 endmenu
drivers/firewire/Makefile +1 -0
index da77bc0..add3b98 100644
@@ -6,3 +6,4 @@ fw-core-objs := fw-card.o fw-topology.o 
 	fw-device.o fw-device-cdev.o
 
 obj-$(CONFIG_FW) += fw-core.o
+obj-$(CONFIG_FW_OHCI) += fw-ohci.o
drivers/firewire/fw-ohci.c new file +1394 -0

1,394 lines not on this page · raw message

drivers/firewire/fw-ohci.h new file +152 -0

152 lines not on this page · raw message

Signature · 1 line
1.4.2.4