Add driver for OHCI firewire host controllers.
PATCH 3/4 Add driver for OHCI firewire host controllers.
Signed-off-by Kristian Hoegsberg <[email protected]>
--- drivers/firewire/Kconfig | 11 drivers/firewire/Makefile | 1 drivers/firewire/fw-ohci.c | 1394 ++++++++++++++++++++++++++++++++++++++++++++ drivers/firewire/fw-ohci.h | 152 +++++ 4 files changed, 1558 insertions(+), 0 deletions(-)
drivers/firewire/Kconfig +11 -0
@@ -20,4 +20,15 @@ config FW To compile this driver as a module, say M here: the module will be called fw-core. +config FW_OHCI + tristate "Support for OHCI firewire host controllers" + depends on PCI && FW + help + Enable this driver if you have an firewire controller based + on the OHCI specification. For all practical purposes, this + is the only chipset in use, so say Y here. + + To compile this driver as a module, say M here: the + module will be called fw-ohci. + endmenu
drivers/firewire/Makefile +1 -0
@@ -6,3 +6,4 @@ fw-core-objs := fw-card.o fw-topology.o fw-device.o fw-device-cdev.o obj-$(CONFIG_FW) += fw-core.o +obj-$(CONFIG_FW_OHCI) += fw-ohci.o
drivers/firewire/fw-ohci.c new file +1394 -0
1,394 lines not on this page · raw message
drivers/firewire/fw-ohci.h new file +152 -0
152 lines not on this page · raw message
Signature · 1 line
1.4.2.4