Skip to contentSkip to conversation

Add SBP-2 protocol driver for storage devices.

PATCH In review Kristian Høgsberg 1 participant 1 message Dec 20, 2006 Firewire

lore
Share & tools
lore
#0 lore raw

PATCH 4/4 Add SBP-2 protocol driver for storage devices.

---
 drivers/firewire/Kconfig   |   12 
 drivers/firewire/Makefile  |    1 
 drivers/firewire/fw-sbp2.c | 1073 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1086 insertions(+), 0 deletions(-)
drivers/firewire/Kconfig +12 -0
index b386334..bfab4b3 100644
@@ -31,4 +31,16 @@ config FW_OHCI
 	  To compile this driver as a module, say M here: the
 	  module will be called fw-ohci.
 
+config FW_SBP2
+	tristate "Support for storage devices (SBP-2 protocol driver)"
+	depends on FW && SCSI
+	help
+	  This option enables you to use SBP-2 devices connected to an
+	  firewire bus.  SBP-2 devices include storage devices like
+	  harddisks and DVD drives, also some other FireWire devices
+	  like scanners.
+
+	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
+	  configuration section.
+
 endmenu
drivers/firewire/Makefile +1 -0
index add3b98..b955c99 100644
@@ -7,3 +7,4 @@ fw-core-objs := fw-card.o fw-topology.o 
 
 obj-$(CONFIG_FW) += fw-core.o
 obj-$(CONFIG_FW_OHCI) += fw-ohci.o
+obj-$(CONFIG_FW_SBP2) += fw-sbp2.o
\ No newline at end of file
drivers/firewire/fw-sbp2.c new file +1073 -0

1,073 lines not on this page · raw message

Signature · 1 line
1.4.2.4