Add SBP-2 protocol driver for storage devices.
PATCH 4/4 Add SBP-2 protocol driver for storage devices.
Signed-off-by Kristian Hoegsberg <[email protected]>
--- drivers/firewire/Kconfig | 12 drivers/firewire/Makefile | 1 drivers/firewire/fw-sbp2.c | 1073 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1086 insertions(+), 0 deletions(-)
drivers/firewire/Kconfig +12 -0
@@ -31,4 +31,16 @@ config FW_OHCI To compile this driver as a module, say M here: the module will be called fw-ohci. +config FW_SBP2 + tristate "Support for storage devices (SBP-2 protocol driver)" + depends on FW && SCSI + help + This option enables you to use SBP-2 devices connected to an + firewire bus. SBP-2 devices include storage devices like + harddisks and DVD drives, also some other FireWire devices + like scanners. + + You should also enable support for disks, CD-ROMs, etc. in the SCSI + configuration section. + endmenu
drivers/firewire/Makefile +1 -0
@@ -7,3 +7,4 @@ fw-core-objs := fw-card.o fw-topology.o obj-$(CONFIG_FW) += fw-core.o obj-$(CONFIG_FW_OHCI) += fw-ohci.o +obj-$(CONFIG_FW_SBP2) += fw-sbp2.o
drivers/firewire/fw-sbp2.c new file +1073 -0
1,073 lines not on this page · raw message
Signature · 1 line
1.4.2.4