How can I do traffic shapping for passive ftp ?
Hello
I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?
If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...
Any Ideas of how I can achieve this ?
Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hello Sebastien,
If you are configuring the server side(where the ftpd is running) then you can tell the ftpd which ports to use for those passive connections in its configuration file.
Then you can apply your rules on those ports ;-)
HTH,
-nik
Quoted 9 lines · Sébastien CRAMATTE
Hello
I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?
If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...
Quoted 7 lines
Any Ideas of how I can achieve this ?
Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Dnia poniedzia³ek, 8 stycznia 2007 21:25, Sébastien CRAMATTE napisa³(a):
Quoted 8 lines
Hello
I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?
If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...
Use ip_nat_ftp and ip_conntrack_ftp modules. Then mark ftp traffic with helper match.
example:
iptables -t mangle -A FORWARD -m helper --helper ftp -j MARK --set-mark 0x03
Signature · 8 lines
| pozdrawiam / greetings | powered by Trustix, Gentoo and FreeBSD | | Kajetan Staszkiewicz | jabber,email,www: vegeta()tuxpowered net | | Vegeta | IMQ devnames: http://tuxpowered.net | `------------------------^------------------------------------------' _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 13 lines · Kajetan Staszkiewicz
Dnia poniedzia³ek, 8 stycznia 2007 21:25, Sébastien CRAMATTE napisa³(a):
Quoted 9 lines
Hello
I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?
If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...
Quoted 8 lines
Use
ip_nat_ftpandip_conntrack_ftpmodules. Then mark ftp traffic with helper match.example:
iptables -t mangle -A FORWARD -m helper --helper ftp -j MARK --set-mark0x03
I haven't specifiy that I don't use NAT. I use this QoS manager for a very small ISP and I can't control ftp server
Upgrading Layer7 protocols seems thas is ok ...
Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc