Skip to contentSkip to conversation

How can I do traffic shapping for passive ftp ?

LARTC Sébastien CRAMATTE 3 participants 4 messages Jan 8, 2007 – Jan 9, 2007

lore
Share & tools
lore
#0 lore raw

Hello

I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?

If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...

Any Ideas of how I can achieve this ?

Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Hello Sebastien,
If you are configuring the server side(where the ftpd is running) then you can tell the ftpd which ports to use for those passive connections in its configuration file.

Then you can apply your rules on those ports ;-)

HTH,
-nik

Quoted 9 lines · Sébastien CRAMATTE

Hello

I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?

If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...

Quoted 7 lines

Any Ideas of how I can achieve this ?

Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to Sébastien CRAMATTE

Dnia poniedzia³ek, 8 stycznia 2007 21:25, Sébastien CRAMATTE napisa³(a):

Quoted 8 lines

Hello

I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?

If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...

Use ip_nat_ftp and ip_conntrack_ftp modules. Then mark ftp traffic with helper match.

example:
iptables -t mangle -A FORWARD -m helper --helper ftp -j MARK --set-mark 0x03

Signature · 8 lines
| pozdrawiam / greetings | powered by Trustix, Gentoo and FreeBSD   |
|  Kajetan Staszkiewicz  | jabber,email,www: vegeta()tuxpowered net |
|        Vegeta          | IMQ devnames: http://tuxpowered.net      |
`------------------------^------------------------------------------'
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#3 lore raw
In reply to Sébastien CRAMATTE
Quoted 13 lines · Kajetan Staszkiewicz

Dnia poniedzia³ek, 8 stycznia 2007 21:25, Sébastien CRAMATTE napisa³(a):

Quoted 9 lines

Hello

I've setuped a bridge with iptables + layer + ipp2p + tc I don't know how to shape passive ftp ?

If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ...
When I done a tcpdump I can see that othe port than 20 or 21 are used ...

Quoted 8 lines

Use ip_nat_ftp and ip_conntrack_ftp modules. Then mark ftp traffic with helper match.

example:
iptables -t mangle -A FORWARD -m helper --helper ftp -j MARK --set-mark 0x03

I haven't specifiy that I don't use NAT. I use this QoS manager for a very small ISP and I can't control ftp server
Upgrading Layer7 protocols seems thas is ok ...

Regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc