buffer overflows in the tty flip buffer in 2.6.17
When data is received from the hardware, it needs to be placed into the tty device's flip buffer. This can be done with the following bit of code:
for (i = 0; i < data_size; ++i) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
tty_flip_buffer_push(tty);
tty_insert_flip_char(tty, data[i], 0);
}tty_flip_buffer_push(tty);
This example makes sure there are no buffer overflows in the tty flip buffer as the data is being added.
But how it is done in 2.6.17 linux kernel? I did check this "overflow code" in new tty driver's code. This code looks like just removed. But somehow overflow in the tty buffer must be kept.
Mockern napsal(a):
Quoted 9 lines
When data is received from the hardware, it needs to be placed into the tty device's flip buffer. This can be done with the following bit of code:
for (i = 0; i < data_size; ++i) { if (tty->flip.count >= TTY_FLIPBUF_SIZE) tty_flip_buffer_push(tty); tty_insert_flip_char(tty, data[i], 0); }
tty_flip_buffer_push(tty);
size = tty_buffer_request_room(tty, data_size);tty_insert_flip_string(tty, data, min(data_size, size));tty_flip_buffer_push(tty);
+ cope with size < data_size (some data_size -= size with 3 lines above in do {} while (data_size))
regards,
Signature · 6 lines
http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E Hnus <[email protected]> is an alias for /dev/null
Quoted 7 lines · Mockern
When data is received from the hardware, it needs to be placed into the tty device's flip buffer. This can be done with the following bit of code:
for (i = 0; i < data_size; ++i) { if (tty->flip.count >= TTY_FLIPBUF_SIZE) tty_flip_buffer_push(tty); tty_insert_flip_char(tty, data[i], 0); }
Quoted 5 lines
tty_flip_buffer_push(tty);This example makes sure there are no buffer overflows in the tty flip buffer as the data is being added.
But how it is done in 2.6.17 linux kernel? I did check this "overflow code" in new tty driver's code. This code looks like just removed. But somehow overflow in the tty buffer must be kept.
Well there was a problem in 2.6.16, which was fixed by 2.6.18, although I am not sure if it was done by 2.6.17. It would loose characters due to buffer overflow and not properly checking under high load. I grabbed a few patches from the git tree that were added after 2.6.16 to fix the tty problems I was having.
--
Len Sorensen
Thanx for your respond.
Could you please inform me what patches exactly you have grabbed?
Quoted 27 lines · Mockern
Quoted 7 lines
When data is received from the hardware, it needs to be placed into the tty device's flip buffer. This can be done with the following bit of code:
for (i = 0; i < data_size; ++i) { if (tty->flip.count >= TTY_FLIPBUF_SIZE) tty_flip_buffer_push(tty); tty_insert_flip_char(tty, data[i], 0); }Quoted 5 lines
tty_flip_buffer_push(tty);This example makes sure there are no buffer overflows in the tty flip buffer as the data is being added.
But how it is done in 2.6.17 linux kernel? I did check this "overflow code" in new tty driver's code. This code looks like just removed. But somehow overflow in the tty buffer must be kept.
Well there was a problem in 2.6.16, which was fixed by 2.6.18, although I am not sure if it was done by 2.6.17. It would loose characters due to buffer overflow and not properly checking under high load. I grabbed a few patches from the git tree that were added after 2.6.16 to fix the tty problems I was having.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 1 line
Сегодня удачный день, чтобы завести почту на Яндексе http://mail.yandex.ru
Quoted 3 lines · Mockern
Thanx for your respond.
Could you please inform me what patches exactly you have grabbed?
If you see the thread "Re: Strange problem with tty layer", which I just posted a final update too, it has the list of linux-2.6 git commits that I applied to 2.6.16 in order (some of them are probably in 2.6.17 already, while others might not be).
--
Len Sorensen
Quoted 1 line
But how it is done in 2.6.17 linux kernel? I did check this "overflow code" in new tty driver's code. This code looks like just removed. But somehow overflow in the tty buffer must be kept.
The new tty layer manages memory allocation dynamically and handles overflows itself. Just throw data at it and the right thing will occur in current kernels.