Skip to contentSkip to conversation

Powerpc build unhappy in 2.6.20.4?

DISCUSSION Rob Landley 2 participants 5 messages Mar 30, 2007 – Apr 4, 2007 1 message not in the archive PowerPC

lore
Share & tools
lore
#0 lore raw

So doing:

make ARCH=powerpc CROSS=powerpc-

Chugs along fine for a while, but then it ends with:

MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2

I.E. it builds vmlinux, then dies because there's no zImage, which it never tried to build...

Is there no working default "make" target for powerpc, or did I do something wrong? Could this be a .config issue?

Rob

#1 lore raw
Quoted 7 lines · Rob Landley

So doing:

make ARCH=powerpc CROSS=powerpc-

Chugs along fine for a while, but then it ends with:

MODPOST vmlinux

There should be a lot of activity between this step and the error below.

Quoted 6 lines

ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2

I.E. it builds vmlinux, then dies because there's no zImage, which it never tried to build...

zImage is built later, AFAICT

Quoted 2 lines

Is there no working default "make" target for powerpc, or did I do something wrong? Could this be a .config issue?

Possibly, can we see your .config?

Yours Tony

linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 2 lines · Rob Landley

Sure, quite easily the source of the trouble. Attached in both full .config and mini.config formats.

Okay, I have no idea how it happend but you seem to have an invalid config. It looks to me like you need to select a platform.

One of the following:
CONFIG_PPC_PSERIES
CONFIG_PPC_MAPLE
CONFIG_PPC_IBM_CELL_BLADE
CONFIG_PPC_PS3
CONFIG_PPC_CHRP
CONFIG_PPC_EFIKA
CONFIG_PPC_PMAC

When did this config last build a zImage? I'm guessing either CHRP or PMAC?

Yours Tony

linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!

#4 lore raw
Quoted 3 lines · Tony Breeds
Quoted 1 line · Rob Landley

Sure, quite easily the source of the trouble. Attached in both

full .config

Quoted 4 lines
Quoted 1 line

and mini.config formats.

Okay, I have no idea how it happend but you seem to have an invalid config. It looks to me like you need to select a platform.

So "make oldconfig ARCH=powerpc" will accept a config that doesn't have a platform selected?

Quoted 8 lines

One of the following:
CONFIG_PPC_PSERIES
CONFIG_PPC_MAPLE
CONFIG_PPC_IBM_CELL_BLADE
CONFIG_PPC_PS3
CONFIG_PPC_CHRP
CONFIG_PPC_EFIKA
CONFIG_PPC_PMAC

Hmmm... So CONFIG_PPC_MULTIPLATFORM doesn't cover it? ("There is no help available for this kernel option"... Maybe a website somewhere?)

I just ran "make oldconfig" again and it didn't complain about any of those not being set...

Quoted 2 lines

When did this config last build a zImage? I'm guessing either CHRP or PMAC?

Er, never. I was largely guessing at what I needed via menuconfig. (I'm trying to get something I can boot to a shell prompt under QEMU.)

I'll try this CHRP thing...

Thanks,

Rob

Signature · 2 lines
Penguicon 5.0 Apr 20-22, Linux Expo/SF Convention.  Bruce Schneier, Christine 
Peterson, Steve Jackson, Randy Milholland, Elizabeth Bear, Charlie Stross...
#5 lore raw
Quoted 2 lines · Rob Landley

So "make oldconfig ARCH=powerpc" will accept a config that doesn't have a platform selected?

It seems so.

I think the patch below will fix that by forcing at least one platform to be selected. Can you try it and see if it helps with your current problem?

Quoted 2 lines

Hmmm... So CONFIG_PPC_MULTIPLATFORM doesn't cover it? ("There is no help available for this kernel option"... Maybe a website somewhere?)

CONFIG_PPC_MULTIPLATFORM Allows you to select from the options, but isn't a valid platform in itself.

Quoted 2 lines

Er, never. I was largely guessing at what I needed via menuconfig. (I'm trying to get something I can boot to a shell prompt under QEMU.)

Ahh.

Quoted 1 line

I'll try this CHRP thing...

Perhaps starting with make chrp32_defconfig would be a reasonable starting point?

---
 arch/powerpc/Kconfig |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)
arch/powerpc/Kconfig +21 -0
index d6abe49..f3f0628 100644
@@ -360,6 +360,14 @@ endmenu
 
 source "init/Kconfig"
 
+config PPC_PLATFORM_CHOSEN
+	def_bool n
+
+config PPC_DEFAULT_PLATFORM
+	def_bool PPC_MULTIPLATFORM && !PPC_PLATFORM_CHOSEN
+	select PPC_CHRP    if PPC32
+	select PPC_PSERIES if PPC64
+
 menu "Platform support"
 	depends on PPC64 || CLASSIC32
 
@@ -406,12 +414,15 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+# No need to "select PPC_PLATFORM_CHOSEN" for pSeries, as it is the default
+# platform for PPC64, see PPC_DEFAULT_PLATFORM
 	default y
 
 config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_INDIRECT_IO
+	select PPC_PLATFORM_CHOSEN
 
 config PPC_CHRP
 	bool "Common Hardware Reference Platform (CHRP) based machines"
@@ -423,6 +434,8 @@ config PPC_CHRP
 	select PPC_MPC106
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+# No need to "select PPC_PLATFORM_CHOSEN" here, as it is the default platform 
+# for PPC32, see PPC_DEFAULT_PLATFORM
 	default y
 
 config PPC_MPC52xx
@@ -436,6 +449,7 @@ config PPC_EFIKA
 	select RTAS_PROC
 	select PPC_MPC52xx
 	select PPC_NATIVE
+	select PPC_PLATFORM_CHOSEN
 	default n
 
 config PPC_LITE5200
@@ -451,6 +465,7 @@ config PPC_PMAC
 	select PPC_INDIRECT_PCI if PPC32
 	select PPC_MPC106 if PPC32
 	select PPC_NATIVE
+	select PPC_PLATFORM_CHOSEN
 	default y
 
 config PPC_PMAC64
@@ -461,6 +476,7 @@ config PPC_PMAC64
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
 	select PPC_970_NAP
+	select PPC_PLATFORM_CHOSEN
 	default y
 
 config PPC_PREP
@@ -471,6 +487,7 @@ config PPC_PREP
 	select PPC_INDIRECT_PCI
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+	select PPC_PLATFORM_CHOSEN
 	default n
 
 config PPC_MAPLE
@@ -485,6 +502,7 @@ config PPC_MAPLE
 	select PPC_NATIVE
 	select PPC_RTAS
 	select ATA_NONSTANDARD if ATA
+	select PPC_PLATFORM_CHOSEN
 	default n
 	help
           This option enables support for the Maple 970FX Evaluation Board.
@@ -498,6 +516,7 @@ config PPC_PASEMI
 	select PPC_UDBG_16550
 	select GENERIC_TBSYNC
 	select PPC_NATIVE
+	select PPC_PLATFORM_CHOSEN
 	help
 	  This option enables support for PA Semi's PWRficient line
 	  of SoC processors, including PA6T-1682M
@@ -524,11 +543,13 @@ config PPC_IBM_CELL_BLADE
 	select MMIO_NVRAM
 	select PPC_UDBG_16550
 	select UDBG_RTAS_CONSOLE
+	select PPC_PLATFORM_CHOSEN
 
 config PPC_PS3
 	bool "Sony PS3 (incomplete)"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_CELL
+	select PPC_PLATFORM_CHOSEN
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.
Signature · 7 lines
1.5.0.6


Yours Tony

  linux.conf.au        http://linux.conf.au/ || http://lca2008.linux.org.au/
  Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!