Powerpc build unhappy in 2.6.20.4?
So doing:
make ARCH=powerpc CROSS=powerpc-
Chugs along fine for a while, but then it ends with:
MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2
I.E. it builds vmlinux, then dies because there's no zImage, which it never tried to build...
Is there no working default "make" target for powerpc, or did I do something wrong? Could this be a .config issue?
Rob
Quoted 7 lines · Rob Landley
So doing:
make ARCH=powerpc CROSS=powerpc-
Chugs along fine for a while, but then it ends with:
MODPOST vmlinux
There should be a lot of activity between this step and the error below.
Quoted 6 lines
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [
arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2I.E. it builds vmlinux, then dies because there's no zImage, which it never tried to build...
zImage is built later, AFAICT
Quoted 2 lines
Is there no working default "make" target for powerpc, or did I do something wrong? Could this be a .config issue?
Possibly, can we see your .config?
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
Quoted 2 lines · Rob Landley
Sure, quite easily the source of the trouble. Attached in both full .config and mini.config formats.
Okay, I have no idea how it happend but you seem to have an invalid config. It looks to me like you need to select a platform.
One of the following:
CONFIG_PPC_PSERIES
CONFIG_PPC_MAPLE
CONFIG_PPC_IBM_CELL_BLADE
CONFIG_PPC_PS3
CONFIG_PPC_CHRP
CONFIG_PPC_EFIKA
CONFIG_PPC_PMAC
When did this config last build a zImage? I'm guessing either CHRP or PMAC?
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
Quoted 3 lines · Tony Breeds
Quoted 1 line · Rob Landley
Sure, quite easily the source of the trouble. Attached in both
full .config
Quoted 4 lines
Quoted 1 line
and mini.config formats.
Okay, I have no idea how it happend but you seem to have an invalid config. It looks to me like you need to select a platform.
So "make oldconfig ARCH=powerpc" will accept a config that doesn't have a platform selected?
Quoted 8 lines
One of the following:
CONFIG_PPC_PSERIES
CONFIG_PPC_MAPLE
CONFIG_PPC_IBM_CELL_BLADE
CONFIG_PPC_PS3
CONFIG_PPC_CHRP
CONFIG_PPC_EFIKA
CONFIG_PPC_PMAC
Hmmm... So CONFIG_PPC_MULTIPLATFORM doesn't cover it? ("There is no help available for this kernel option"... Maybe a website somewhere?)
I just ran "make oldconfig" again and it didn't complain about any of those not being set...
Quoted 2 lines
When did this config last build a zImage? I'm guessing either CHRP or PMAC?
Er, never. I was largely guessing at what I needed via menuconfig. (I'm trying to get something I can boot to a shell prompt under QEMU.)
I'll try this CHRP thing...
Thanks,
Rob
Signature · 2 lines
Penguicon 5.0 Apr 20-22, Linux Expo/SF Convention. Bruce Schneier, Christine Peterson, Steve Jackson, Randy Milholland, Elizabeth Bear, Charlie Stross...
Quoted 2 lines · Rob Landley
So "make oldconfig ARCH=powerpc" will accept a config that doesn't have a platform selected?
It seems so.
I think the patch below will fix that by forcing at least one platform to be selected. Can you try it and see if it helps with your current problem?
Quoted 2 lines
Hmmm... So
CONFIG_PPC_MULTIPLATFORMdoesn't cover it? ("There is no help available for this kernel option"... Maybe a website somewhere?)
CONFIG_PPC_MULTIPLATFORM Allows you to select from the options, but isn't a valid platform in itself.
Quoted 2 lines
Er, never. I was largely guessing at what I needed via menuconfig. (I'm trying to get something I can boot to a shell prompt under QEMU.)
Ahh.
Quoted 1 line
I'll try this CHRP thing...
Perhaps starting with make chrp32_defconfig would be a reasonable starting point?
--- arch/powerpc/Kconfig | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
arch/powerpc/Kconfig +21 -0
@@ -360,6 +360,14 @@ endmenu source "init/Kconfig" +config PPC_PLATFORM_CHOSEN + def_bool n + +config PPC_DEFAULT_PLATFORM + def_bool PPC_MULTIPLATFORM && !PPC_PLATFORM_CHOSEN + select PPC_CHRP if PPC32 + select PPC_PSERIES if PPC64 + menu "Platform support" depends on PPC64 || CLASSIC32
@@ -406,12 +414,15 @@ config PPC_PSERIES select RTAS_ERROR_LOGGING select PPC_UDBG_16550 select PPC_NATIVE +# No need to "select PPC_PLATFORM_CHOSEN" for pSeries, as it is the default +# platform for PPC64, see PPC_DEFAULT_PLATFORM default y config PPC_ISERIES bool "IBM Legacy iSeries" depends on PPC_MULTIPLATFORM && PPC64 select PPC_INDIRECT_IO + select PPC_PLATFORM_CHOSEN config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines"
@@ -423,6 +434,8 @@ config PPC_CHRP select PPC_MPC106 select PPC_UDBG_16550 select PPC_NATIVE +# No need to "select PPC_PLATFORM_CHOSEN" here, as it is the default platform +# for PPC32, see PPC_DEFAULT_PLATFORM default y config PPC_MPC52xx
@@ -436,6 +449,7 @@ config PPC_EFIKA select RTAS_PROC select PPC_MPC52xx select PPC_NATIVE + select PPC_PLATFORM_CHOSEN default n config PPC_LITE5200
@@ -451,6 +465,7 @@ config PPC_PMAC select PPC_INDIRECT_PCI if PPC32 select PPC_MPC106 if PPC32 select PPC_NATIVE + select PPC_PLATFORM_CHOSEN default y config PPC_PMAC64
@@ -461,6 +476,7 @@ config PPC_PMAC64 select MPIC_BROKEN_U3 select GENERIC_TBSYNC select PPC_970_NAP + select PPC_PLATFORM_CHOSEN default y config PPC_PREP
@@ -471,6 +487,7 @@ config PPC_PREP select PPC_INDIRECT_PCI select PPC_UDBG_16550 select PPC_NATIVE + select PPC_PLATFORM_CHOSEN default n config PPC_MAPLE
@@ -485,6 +502,7 @@ config PPC_MAPLE select PPC_NATIVE select PPC_RTAS select ATA_NONSTANDARD if ATA + select PPC_PLATFORM_CHOSEN default n help This option enables support for the Maple 970FX Evaluation Board.
@@ -498,6 +516,7 @@ config PPC_PASEMI select PPC_UDBG_16550 select GENERIC_TBSYNC select PPC_NATIVE + select PPC_PLATFORM_CHOSEN help This option enables support for PA Semi's PWRficient line of SoC processors, including PA6T-1682M
@@ -524,11 +543,13 @@ config PPC_IBM_CELL_BLADE select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE + select PPC_PLATFORM_CHOSEN config PPC_PS3 bool "Sony PS3 (incomplete)" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL + select PPC_PLATFORM_CHOSEN help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor.
Signature · 7 lines
1.5.0.6 Yours Tony linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/ Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!