Skip to contentSkip to conversation

PXA270 sleeping problems after update

DISCUSSION Rodolfo Giometti 2 participants 3 messages Jun 22, 2007

lore
Share & tools
lore
#0 lore raw

I just updated my linux tree from 2.6.20-rc6 to 2.6.22-rc3 for my custom PXA270 based board and I discovered that now sleep/wakeup functionality doesn't work anymore! :'(

After several merges, compiling stages and tests I discovered that the problem arises from 2.6.21 to 2.6.22-rc1 and that the _real_ problem is that the machine never goes to sleep (I discovered that by looking at current consuming since the JTAG doesn't attach...).

Any suggestions?

Thanks a lot,

Rodolfo

Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
#1 lore raw
Quoted 3 lines · Rodolfo Giometti

I just updated my linux tree from 2.6.20-rc6 to 2.6.22-rc3 for my custom PXA270 based board and I discovered that now sleep/wakeup functionality doesn't work anymore! :'(

This is already on linux-arm-kernel, the best place to find people who do Linux on ARM.

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'
#2 lore raw
Quoted 3 lines · Ben Dooks

This is already on linux-arm-kernel, the best place to find people who do Linux on ARM.

I see... but after looking at ARM changes I find nothing useful to resolve the problem, that's why I decided to write here also.

Ciao,

Rodolfo

Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127