PXA270 sleeping problems after update
I just updated my linux tree from 2.6.20-rc6 to 2.6.22-rc3 for my custom PXA270 based board and I discovered that now sleep/wakeup functionality doesn't work anymore! :'(
After several merges, compiling stages and tests I discovered that the problem arises from 2.6.21 to 2.6.22-rc1 and that the _real_ problem is that the machine never goes to sleep (I discovered that by looking at current consuming since the JTAG doesn't attach...).
Any suggestions?
Thanks a lot,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems [email protected] UNIX programming phone: +39 349 2432127
Quoted 3 lines · Rodolfo Giometti
I just updated my linux tree from 2.6.20-rc6 to 2.6.22-rc3 for my custom PXA270 based board and I discovered that now sleep/wakeup functionality doesn't work anymore! :'(
This is already on linux-arm-kernel, the best place to find people who do Linux on ARM.
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'
Quoted 3 lines · Ben Dooks
This is already on linux-arm-kernel, the best place to find people who do Linux on ARM.
I see... but after looking at ARM changes I find nothing useful to resolve the problem, that's why I decided to write here also.
Ciao,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems [email protected] UNIX programming phone: +39 349 2432127