clean up reading of ICR register in FEC driver
PATCH 1/1 clean up reading of ICR register in FEC driver
On the MCF5272, there is no need to read the ICR before writing it :
the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2.
Signed-off-by Philippe De Muyter <[email protected]>
Signed-off-by Greg Ungerer <[email protected]>
---
drivers/net/fec.c +3 -3
@@ -1269,7 +1270,7 @@ icrp = (volatile unsigned long *) (MCF_MBAR +MCFSIM_ICR3 ); *icrp =0x00000ddd ; icrp = (volatile unsigned long *) (MCF_MBAR +MCFSIM_ICR1 ); - *icrp = (*icrp &0x70777777 ) |0x0d000000 ; + *icrp =0x0d000000 ; }static void __inline__fec_set_mii (struct net_device *dev,struct fec_enet_private *fep)
@@ -1331,7 +1332,7 @@ {volatile unsigned long *icrp; icrp = (volatile unsigned long *) (MCF_MBAR +MCFSIM_ICR1 ); - *icrp = (*icrp &0x70777777 ) |0x08000000 ; + *icrp =0x08000000 ; }static void __inline__fec_phy_ack_intr (void )
@@ -1339,7 +1340,7 @@volatile unsigned long *icrp;/* Acknowledge the interrupt */ icrp = (volatile unsigned long *) (MCF_MBAR +MCFSIM_ICR1 ); - *icrp = (*icrp &0x77777777 ) |0x08000000 ; + *icrp =0x0d000000 ; }static void __inline__fec_localhw_setup (void )