Skip to contentSkip to conversation

clean up reading of ICR register in FEC driver

PATCH New Greg Ungerer 1 participant 1 message Jul 30, 2007 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clean up reading of ICR register in FEC driver

On the MCF5272, there is no need to read the ICR before writing it :
the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2.

---

drivers/net/fec.c +3 -3
diff -Naur linux-2.6.23-rc1-git2/drivers/net/fec.c linux/drivers/net/fec.c
@@ -1269,7 +1270,7 @@
 	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3);
 	*icrp = 0x00000ddd;
 	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x70777777) | 0x0d000000;
+	*icrp = 0x0d000000;
 }
 
 static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
@@ -1331,7 +1332,7 @@
 {
 	volatile unsigned long *icrp;
 	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x70777777) | 0x08000000;
+	*icrp = 0x08000000;
 }
 
 static void __inline__ fec_phy_ack_intr(void)
@@ -1339,7 +1340,7 @@
 	volatile unsigned long *icrp;
 	/* Acknowledge the interrupt */
 	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x08000000;
+	*icrp = 0x0d000000;
 }
 
 static void __inline__ fec_localhw_setup(void)