Skip to contentSkip to conversation

2.6.23-rcX SG_GET_SCSI_ID regression?

DISCUSSION Joerg Platte 1 participant 2 messages Oct 3, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

sane is not able to detect my old SCSI scanner with kernel 2.6.23-rc9. The scanner was found with 2.6.22.8. According to strace the behavior of the SG_GET_SCSI_ID ioctl changed:

2.6.22.8:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
ioctl(3, SG_SET_TIMEOUT, 0xbfe40624) = 0
ioctl(3, SG_GET_VERSION_NUM, 0x8063fa4) = 0
ioctl(3, SG_GET_SCSI_ID, 0xbfe405e0) = 0

2.6.23-rc9:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
ioctl(3, SG_SET_TIMEOUT, 0xbf84a834) = 0
ioctl(3, SG_GET_VERSION_NUM, 0x8062524) = 0
ioctl(3, SG_GET_SCSI_ID, 0xbf84a7f0) = -1 ENOTTY (Inappropriate ioctl for
device)

Is this an intentional change?

regards,
Jörg

Signature · 2 lines
PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D
PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605
#1 lore raw

Am Mittwoch, 3. Oktober 2007 schrieb Joerg Platte:
Hi,

Quoted 6 lines

2.6.22.8:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
ioctl(3, SG_SET_TIMEOUT, 0xbfe40624) = 0
ioctl(3, SG_GET_VERSION_NUM, 0x8063fa4) = 0
ioctl(3, SG_GET_SCSI_ID, 0xbfe405e0) = 0

Quoted 6 lines

2.6.23-rc9:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
ioctl(3, SG_SET_TIMEOUT, 0xbf84a834) = 0
ioctl(3, SG_GET_VERSION_NUM, 0x8062524) = 0
ioctl(3, SG_GET_SCSI_ID, 0xbf84a7f0) = -1 ENOTTY (Inappropriate ioctl
for device)

After some reboots and tests I discovered, that this error occurs only when the scanner was turned off during system boot and was discovered later by invoking the following script:
for device in /sys/class/scsi_host/host*/scan ; do

        echo "0 - -" > $device

done
With 2.6.22 and before the scanner was fully functional when discovered by a bus rescan.

regards,
Jörg

Signature · 2 lines
PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D
PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605