2.6.23-rcX SG_GET_SCSI_ID regression?
Hi,
sane is not able to detect my old SCSI scanner with kernel 2.6.23-rc9. The scanner was found with 2.6.22.8. According to strace the behavior of the SG_GET_SCSI_ID ioctl changed:
2.6.22.8:open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3ioctl(3, SG_SET_TIMEOUT, 0xbfe40624) = 0ioctl(3, SG_GET_VERSION_NUM, 0x8063fa4) = 0ioctl(3, SG_GET_SCSI_ID, 0xbfe405e0) = 0
2.6.23-rc9:open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3ioctl(3, SG_SET_TIMEOUT, 0xbf84a834) = 0ioctl(3, SG_GET_VERSION_NUM, 0x8062524) = 0ioctl(3, SG_GET_SCSI_ID, 0xbf84a7f0) = -1 ENOTTY (Inappropriate ioctl for
device)
Is this an intentional change?
regards,
Jörg
Signature · 2 lines
PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605
Am Mittwoch, 3. Oktober 2007 schrieb Joerg Platte:
Hi,
Quoted 6 lines
2.6.22.8:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL)= 3ioctl(3, SG_SET_TIMEOUT, 0xbfe40624)= 0ioctl(3, SG_GET_VERSION_NUM, 0x8063fa4)= 0ioctl(3, SG_GET_SCSI_ID, 0xbfe405e0)= 0
Quoted 6 lines
2.6.23-rc9:
open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL)= 3ioctl(3, SG_SET_TIMEOUT, 0xbf84a834)= 0ioctl(3, SG_GET_VERSION_NUM, 0x8062524)= 0ioctl(3, SG_GET_SCSI_ID, 0xbf84a7f0)= -1 ENOTTY (Inappropriate ioctl
for device)
After some reboots and tests I discovered, that this error occurs only when the scanner was turned off during system boot and was discovered later by invoking the following script:
for device in /sys/class/scsi_host/host*/scan ; do
echo "0 - -" > $device
done
With 2.6.22 and before the scanner was fully functional when discovered by a bus rescan.
regards,
Jörg
Signature · 2 lines
PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605