hdsp driver broken for Multiface II Rev 35
Hi folks,
changeset 5326 from 2007/08/31 broke the driver for this card revision. There was an older thread about this problem which didn't seem to come to a conclusion.
ioctl SNDRV_HDSP_IOCTL_GET_VERSION returns
io_type = 1 (Multiface)firmware_rev = 0x35
which is correct. The old code for hdsp_playback_to_output_key looks like this:
static int hdsp_playback_to_output_key (struct hdsp *hdsp, int in, int out)
{
switch (hdsp->firmware_rev) {
case 0xa:
return (64 * out) + (32 + (in));
case 0x96:
case 0x97:
return (32 * out) + (16 + (in));
default:
return (52 * out) + (26 + (in));
}
}For my card the result is "(52 * out) + (26 + (in))". The new code looks like this:
static int hdsp_playback_to_output_key (struct hdsp *hdsp, int in, int out)
{
switch (hdsp->io_type) {
case Multiface:
case Digiface:
default:
return (64 * out) + (32 + (in));
case H9632:
return (32 * out) + (16 + (in));
case H9652:
return (52 * out) + (26 + (in));
}
}which gives the wrong result "(64 * out) + (32 + (in))". The old code returns this when firmware_rev == 0xa, which might be the revision of the older Multiface (not Multiface II). I changed the code to
static int hdsp_playback_to_output_key (struct hdsp *hdsp, int in, int out)
{
switch (hdsp->io_type) {
case Multiface:
case Digiface:
default:
if (hdsp->firmware_rev == 0xa)
return (64 * out) + (32 + (in));
else
return (52 * out) + (26 + (in));
case H9632:
return (32 * out) + (16 + (in));
case H9652:
return (52 * out) + (26 + (in));
}
}Another possibility would be to go back to the old version of the code and only make changes for io_type H9632/H9652 with new firmware revisions:
static int hdsp_playback_to_output_key (struct hdsp *hdsp, int in, int out)
{
switch (hdsp->firmware_rev) {
case 0xa:
return (64 * out) + (32 + (in));
case 0x96:
case 0x97:
return (32 * out) + (16 + (in));
}
switch (hdsp->io_type) {
case H9632:
return (32 * out) + (16 + (in));
case Multiface:
case H9652:
return (52 * out) + (26 + (in));
case Digiface:
??? is there a Digiface with revision != 0xa ???
default:
??? HDSP_IO_Type Undefined ???
}
}Similar changes must be made to hdsp_input_to_output_key. Does anyone know which firmware revision exist for which card (io_type) ?
thank you
Andreas Degert
At Mon, 14 Jan 2008 02:21:42 +0100,
Quoted 50 lines · Andreas Degert
Hi folks,
changeset 5326 from 2007/08/31 broke the driver for this card revision. There was an older thread about this problem which didn't seem to come to a conclusion.
ioctl
SNDRV_HDSP_IOCTL_GET_VERSIONreturns
io_type= 1 (Multiface)firmware_rev=0x35which is correct. The old code for
hdsp_playback_to_output_keylooks like this:static int
hdsp_playback_to_output_key(struct hdsp *hdsp, int in, int out){ switch (hdsp->firmware_rev) { case 0xa: return (64 * out) + (32 + (in)); case 0x96: case 0x97: return (32 * out) + (16 + (in)); default: return (52 * out) + (26 + (in)); } }For my card the result is "(52 * out) + (26 + (in))". The new code looks like this:
static int
hdsp_playback_to_output_key(struct hdsp *hdsp, int in, int out){ switch (hdsp->io_type) { case Multiface: case Digiface: default: return (64 * out) + (32 + (in)); case H9632: return (32 * out) + (16 + (in)); case H9652: return (52 * out) + (26 + (in)); } }which gives the wrong result "(64 * out) + (32 + (in))". The old code returns this when
firmware_rev==0xa, which might be the revision of the older Multiface (not Multiface II). I changed the code tostatic int
hdsp_playback_to_output_key(struct hdsp *hdsp, int in, int out)
Quoted 15 lines
{
switch (hdsp->io_type) {
case Multiface:
case Digiface:
default:
if (hdsp->firmware_rev == 0xa)
return (64 * out) + (32 + (in));
else
return (52 * out) + (26 + (in));
case H9632:
return (32 * out) + (16 + (in));
case H9652:
return (52 * out) + (26 + (in));
}
}This looks OK. Could you prepare a patch (with a proper changelog and your sing-off)?
Quoted 3 lines
Another possibility would be to go back to the old version of the code and only make changes for
io_typeH9632/H9652 with new firmware revisions:
It's a wrong approach in general when the driver supports multiple hardwares. The firmware is basically strongly bound with the hardware model, so checking only the revision is dangerous as well.
Thanks,
Takashi
On Mon, 14 Jan 2008 12:00:10 +0100
Takashi Iwai <[email protected]> wrote:
[...]
Quoted 18 lines
Quoted 17 lines
static int
hdsp_playback_to_output_key(struct hdsp *hdsp, int in,int out) { switch (hdsp->io_type) { case Multiface: case Digiface: default: if (hdsp->firmware_rev == 0xa) return (64 * out) + (32 + (in)); else return (52 * out) + (26 + (in)); case H9632: return (32 * out) + (16 + (in)); case H9652: return (52 * out) + (26 + (in)); } }
Quoted 2 lines
This looks OK. Could you prepare a patch (with a proper changelog and your sing-off)?
ok, here it is:
hdsp: make Multiface II work again
This device has io_type == 1 (Multiface) and firmware_rev > 0xa (fixes regression from changeset 5326)
pci/rme9652/hdsp.c +8 -2
@@ -607,7 +607,10 @@ static int hdsp_playback_to_output_key (case Multiface:case Digiface:default : -return (64 * out) + (32 + (in)); +if (hdsp->firmware_rev ==0xa ) +return (64 * out) + (32 + (in)); +else +return (52 * out) + (26 + (in));case H9632 :return (32 * out) + (16 + (in));case H9652 :
@@ -621,7 +624,10 @@ static int hdsp_input_to_output_key (strcase Multiface:case Digiface:default : -return (64 * out) + in; +if (hdsp->firmware_rev ==0xa ) +return (64 * out) + in; +else +return (52 * out) + in;case H9632 :return (32 * out) + in;case H9652 :
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Andreas,
Quoted 9 lines · Andreas Degert
ok, here it is:
hdsp: make Multiface II work again
This device has
io_type== 1 (Multiface) andfirmware_rev>0xa(fixes regression from changeset 5326)Signed-off-by Andreas Degert <[email protected]>
[..]
I was one of the Digiface users with problems with the new driver revisions. Although I don't know to which tree to apply your patch, I edited alsa-drver-1.0.15 by hand, and so far after a quick test I can confirm that it's working with my Digiface. Thank you very much.
Best regards
Christian
Signature · 8 lines
------------------------------------------------------------------------ Dipl.-Phys. Christian Schumann |Technische Universitaet Kaiserslautern Mail: [email protected] | Fachbereich Physik Tel.: 0631/205-4842 (Office) | http://www.physik.uni-kl.de Tel.: 0631/205-4843 (Lab) | Fax.: 0631/205-3902 | Post: Erwin-Schroedinger-Strasse, D-67663 Kaiserslautern -------------------------------------------------------------------------
Takashi Iwai
AppliedAt Tue, 15 Jan 2008 20:42:15 +0100,
Quoted 26 lines · Andreas Degert
On Mon, 14 Jan 2008 12:00:10 +0100
Takashi Iwai <[email protected]> wrote:[...]
Quoted 18 lines
Quoted 17 lines
static int
hdsp_playback_to_output_key(struct hdsp *hdsp, int in,int out) { switch (hdsp->io_type) { case Multiface: case Digiface: default: if (hdsp->firmware_rev == 0xa) return (64 * out) + (32 + (in)); else return (52 * out) + (26 + (in)); case H9632: return (32 * out) + (16 + (in)); case H9652: return (52 * out) + (26 + (in)); } }Quoted 2 lines
This looks OK. Could you prepare a patch (with a proper changelog and your sing-off)?
Quoted 8 lines
ok, here it is:
hdsp: make Multiface II work again
This device has
io_type== 1 (Multiface) andfirmware_rev>0xa(fixes regression from changeset 5326)Signed-off-by Andreas Degert <[email protected]>
Applied to HG tree now. Thanks!
Takashi