add HCI_BROKEN_ISOC for 0e5e:6622 (bugzilla #9027)
PATCH 1/1 add HCI_BROKEN_ISOC for 0e5e:6622 (bugzilla #9027)
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
see http://bugzilla.kernel.org/show_bug.cgi?id=9027
drivers/bluetooth/hci_usb.c +3 -0
@@ -162,9 +162,6 @@ static struct usb_device_id blacklist_ids[] = {/* Frontline ComProbe Bluetooth Sniffer */ { USB_DEVICE(0x16d3, 0x0002), .driver_info = HCI_SNIFFER }, + /* Brandless USB Bluetooth Dongle */ + { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC }, +
{ } /* Terminating entry */
};
From: SDiZ <[email protected]>
Date: Wed, 13 Feb 2008 11:40:30 +0800
Quoted 5 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
Marcel, please ACK and I'll push this along for you.
Thanks.
Marcel Holtmann
maintainerHi,
Quoted 5 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".
Dave, I don't think this is a broken dongle. I think he hits the case of eSCO versus SCO connection (the fallback to SCO case). I am working on the proper fix for that, but that is not as simple as it seems.
Regards
Marcel
Hi,
Quoted 6 lines · Marcel Holtmann
Hi,
Quoted 4 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
Quoted 7 lines
Quoted 2 lines
when we get the content of
/proc/bus/usb/devicesfor this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".
It have no text on the chips and package, so I don't know the manufacturer name.
/proc/bus/usb/devices shows:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
Quoted 8 lines
Dave, I don't think this is a broken dongle. I think he hits the case of eSCO versus SCO connection (the fallback to SCO case). I am working on the proper fix for that, but that is not as simple as it seems.
Regards
Marcel
Regards,
Yuk-Pong, Cheng (SDiZ)
Marcel Holtmann
maintainerHi,
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
Quoted 6 lines
Quoted 4 lines
when we get the content of
/proc/bus/usb/devicesfor this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".It have no text on the chips and package, so I don't know the manufacturer name.
and what about "hciconfig hci0 version"?
Quoted 12 lines
/proc/bus/usb/devicesshows:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
Quoted 8 lines
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.
Regards
Marcel
Quoted 15 lines · Marcel Holtmann
Hi,
Quoted 12 lines
Quoted 12 lines
Quoted 7 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"when we get the content of
/proc/bus/usb/devicesfor this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".
Quoted 6 lines
Quoted 3 lines
It have no text on the chips and package, so I don't know the manufacturer name.
and what about "hciconfig hci0 version"?
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver: 0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)
Quoted 22 lines
Quoted 12 lines
/proc/bus/usb/devicesshows:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usbQuoted 9 lines
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
Quoted 4 lines
That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.
hmm.. there are some entries for usb mouse and hubs, nothing else. I have attached the whole file for your reference.
Other then the annoying syslog message, everything work fine.
Quoted 6 lines
Regards
Marcel
Regards,
Yuk-Pong, Cheng (SDiZ)
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 56/900 us ( 6%), #Int= 2, #Iso= 1 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1 P: Vendor=0e5e ProdID=6622 Rev= 1.34 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05e3 ProdID=1205 Rev= 1.10 S: Product=USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Marcel Holtmann
maintainerHi,
Quoted 16 lines
Quoted 16 lines
Quoted 15 lines
Quoted 4 lines
Quoted 4 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"Quoted 8 lines
Quoted 3 lines
when we get the content of
/proc/bus/usb/devicesfor this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".It have no text on the chips and package, so I don't know the manufacturer name.
Quoted 6 lines
Quoted 2 lines
and what about "hciconfig hci0 version"?
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev:0x1f4LMP Ver: 2.0 (0x3) LMP Subver:0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)
this is really a broken device. Please update your comment in your patch and re-sent it. The comment should read
/* CONWISE Technology based adapters with buggy SCO support */
And also put the entry right after the RTX Telecom one.
Regards
Marcel
(resending this as i have got no reply in the last week)
Quoted 7 lines · Marcel Holtmann
Hi,
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"
Quoted 9 lines
Quoted 7 lines
Quoted 4 lines
when we get the content of
/proc/bus/usb/devicesfor this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".It have no text on the chips and package, so I don't know the manufacturer name.
and what about "hciconfig hci0 version"?
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver: 0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)
Quoted 7 lines
Quoted 2 lines
/proc/bus/usb/devicesshows:
[...]That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.
hmm.. there are some entries for usb mouse and hubs, nothing else. I have attached the whole file for your reference.
Other then the annoying syslog message, everything work fine.
Quoted 6 lines
Regards
Marcel
Regards,
Yuk-Pong, Cheng (SDiZ)
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 56/900 us ( 6%), #Int= 2, #Iso= 1 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1 P: Vendor=0e5e ProdID=6622 Rev= 1.34 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05e3 ProdID=1205 Rev= 1.10 S: Product=USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.24-1-686 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms