Skip to contentSkip to conversation

add HCI_BROKEN_ISOC for 0e5e:6622 (bugzilla #9027)

PATCH In review SDiZ 3 participants 8 messages Feb 13, 2008 – Feb 19, 2008 Bluetooth drivers

lore
Share & tools
lore

SDiZ

author
#0 lore raw

PATCH 1/1 add HCI_BROKEN_ISOC for 0e5e:6622 (bugzilla #9027)

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

drivers/bluetooth/hci_usb.c +3 -0
index b474185..372c7ef 100644
@@ -162,9 +162,6 @@ static struct usb_device_id blacklist_ids[] = {
        /* Frontline ComProbe Bluetooth Sniffer */
        { USB_DEVICE(0x16d3, 0x0002), .driver_info = HCI_SNIFFER },
 
+        /* Brandless USB Bluetooth Dongle */
+        { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC },
+

{ } /* Terminating entry */
};

maintainer
#2 lore raw
In reply to SDiZ

Hi,

Quoted 5 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

Dave, I don't think this is a broken dongle. I think he hits the case of eSCO versus SCO connection (the fallback to SCO case). I am working on the proper fix for that, but that is not as simple as it seems.

Regards

Marcel

author
#3 lore raw

Hi,

Quoted 6 lines · Marcel Holtmann

Hi,

Quoted 4 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

Quoted 7 lines
Quoted 2 lines

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

It have no text on the chips and package, so I don't know the manufacturer name.

/proc/bus/usb/devices shows:

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms

Quoted 8 lines

Dave, I don't think this is a broken dongle. I think he hits the case of eSCO versus SCO connection (the fallback to SCO case). I am working on the proper fix for that, but that is not as simple as it seems.

Regards

Marcel

Regards,
Yuk-Pong, Cheng (SDiZ)

maintainer
#4 lore raw

Hi,

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

Quoted 6 lines
Quoted 4 lines

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

It have no text on the chips and package, so I don't know the manufacturer name.

and what about "hciconfig hci0 version"?

Quoted 12 lines

/proc/bus/usb/devices shows:

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb

Quoted 8 lines

E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms

That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.

Regards

Marcel

author
#5 lore raw
Quoted 15 lines · Marcel Holtmann

Hi,

Quoted 12 lines
Quoted 12 lines
Quoted 7 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

Quoted 6 lines
Quoted 3 lines

It have no text on the chips and package, so I don't know the manufacturer name.

and what about "hciconfig hci0 version"?

hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver: 0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)

Quoted 22 lines
Quoted 12 lines

/proc/bus/usb/devices shows:

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb

Quoted 9 lines

E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms

Quoted 4 lines

That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.

hmm.. there are some entries for usb mouse and hubs, nothing else. I have attached the whole file for your reference.

Other then the annoying syslog message, everything work fine.

Quoted 6 lines

Regards

Marcel

Regards,
Yuk-Pong, Cheng (SDiZ)

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 56/900 us ( 6%), #Int=  2, #Iso=  1
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs=  1
P:  Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05e3 ProdID=1205 Rev= 1.10
S:  Product=USB Mouse

C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

maintainer
#6 lore raw

Hi,

Quoted 16 lines
Quoted 16 lines
Quoted 15 lines
Quoted 4 lines
Quoted 4 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

Quoted 8 lines
Quoted 3 lines

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

It have no text on the chips and package, so I don't know the manufacturer name.

Quoted 6 lines
Quoted 2 lines

and what about "hciconfig hci0 version"?

hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver: 0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)

this is really a broken device. Please update your comment in your patch and re-sent it. The comment should read

/* CONWISE Technology based adapters with buggy SCO support */

And also put the entry right after the RTX Telecom one.

Regards

Marcel

author
#7 lore raw
In reply to Marcel Holtmann

(resending this as i have got no reply in the last week)

Quoted 7 lines · Marcel Holtmann

Hi,

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

This patch fix bugzilla #9027.
``Syslog flooded with "hci_scodata_packet: hci0 SCO packet for unknown connection handle 92" message"

see http://bugzilla.kernel.org/show_bug.cgi?id=9027

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

when we get the content of /proc/bus/usb/devices for this one. Do you have the manufacturer name of it or at least an idea which kind of device this is. Check "hciconfig hci0 version".

It have no text on the chips and package, so I don't know the manufacturer name.

and what about "hciconfig hci0 version"?

hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1 HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver: 0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)

Quoted 7 lines
Quoted 2 lines

/proc/bus/usb/devices shows:
[...]

That is not all. Otherwise it is violating the Bluetooth HCI USB specification and we have bigger problems when switching USB alternate endpoints.

hmm.. there are some entries for usb mouse and hubs, nothing else. I have attached the whole file for your reference.

Other then the annoying syslog message, everything work fine.

Quoted 6 lines

Regards

Marcel

Regards,
Yuk-Pong, Cheng (SDiZ)

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 56/900 us ( 6%), #Int=  2, #Iso=  1
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=16 #Cfgs=  1
P:  Vendor=0e5e ProdID=6622 Rev= 1.34
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05e3 ProdID=1205 Rev= 1.10
S:  Product=USB Mouse

C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24-1-686 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms