mpc83xx_wdt rework, support for mpc8610 and mpc8xx
Subsystems (3)
v3 cover mpc83xx_wdt rework, support for mpc8610 and mpc8xx
Hi all,
Once again thanks for the previous review, updated series follows.
Changes since v2:
- New patch to fix current driver's checkpatch issues;
- New patch supporting MPC8xx watchdogs (ok to drop until tested);
- Removed MODULE_ALIAS("platform:mpc83xx_wdt"), since this driver is no longer on the platform bus;
- When renaming the driver also mention what kind of CPUs we support. Also give a pointer for BookE watchdog driver. Though BookE users will not see the MPC8xxx driver at all, because we're explicitly listing the CPU families in "depends on". But this tip might be useful for developers.
- Scott Wood noticed that we don't need device_type anymore. I thought that OpenFirmware defines this type, but google didn't prove that. So I just removed the device_type.
Changes since v1:
- Scott Wood asked for mpc83xx_wdt on multiplatform kernels. Done via OF platform driver;
- Kumar Gala asked for mpc83xx_wdt -> mpc8xxx_wdt rename. Done in two steps;
- Segher Boessenkool noticed a negligence in the wdt device tree node. Fixed by removing mpc83xx_wdt compatible entry.
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
PATCH v3 1/8 mpc83xx_wdt: fix checkpatch issues
Quite tired of these warnings ;-), checkpatch spitting them when seeing the rename patch.
WARNING: Use #include <linux/io.h> instead of <asm/io.h> #25: FILE: watchdog/mpc83xx_wdt.c:25:
+#include <asm/io.h>
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> #26: FILE: watchdog/mpc83xx_wdt.c:26:
+#include <asm/uaccess.h>
WARNING: line over 80 characters
#45: FILE: watchdog/mpc83xx_wdt.c:45:
+MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0<timeout<65536, default=65535");
WARNING: line over 80 characters
#49: FILE: watchdog/mpc83xx_wdt.c:49:
+MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
WARNING: space prohibited between function name and open parenthesis '(' #164: FILE: watchdog/mpc83xx_wdt.c:164:
+ wd_base = ioremap(r->start, sizeof (struct mpc83xx_wdt));
total: 0 errors, 5 warnings, 230 lines checked
--- drivers/watchdog/mpc83xx_wdt.c | 12 +++++++----- 1 files changed, 7 insertions(+), 5 deletions(-)
drivers/watchdog/mpc83xx_wdt.c +7 -5
@@ -22,8 +22,8 @@#include <linux/platform_device.h> #include <linux/module.h> #include <linux/watchdog.h> -#include <asm/io.h> -#include <asm/uaccess.h> +#include <linux/io.h> +#include <linux/uaccess.h> struct mpc83xx_wdt {__be32 res0;
@@ -42,11 +42,13 @@ static struct mpc83xx_wdt __iomem *wd_base;static u16 timeout =0xffff ;module_param (timeout, ushort,0 ); -MODULE_PARM_DESC (timeout,"Watchdog timeout in ticks. (0<timeout<65536, default=65535" ); +MODULE_PARM_DESC (timeout,"Watchdog timeout in ticks. " +"(0<timeout<65536, default=65535" );static int reset =1 ;module_param (reset, bool,0 ); -MODULE_PARM_DESC (reset,"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset" ); +MODULE_PARM_DESC (reset,"Watchdog Interrupt/Reset Mode. " +"0 = interrupt, 1 = reset" );/* * We always prescale, but if someone really doesn't want to they can set this
@@ -161,7 +163,7 @@ static int __devinit mpc83xx_wdt_probe(struct platform_device *dev) goto err_out; } - wd_base =ioremap (r->start,sizeof (struct mpc83xx_wdt )); + wd_base =ioremap (r->start,sizeof (struct mpc83xx_wdt ));if (wd_base ==NULL ) { ret = -ENOMEM ;
Signature · 1 line
1.5.5.1
PATCH v3 2/8 mpc83xx_wdt: convert to the OF platform driver
In reply to Anton VorontsovThis patch simply converts mpc83xx_wdt to the OF platform driver so we can directly work with the device tree without passing various stuff through platform data.
--- drivers/watchdog/mpc83xx_wdt.c | 62 +++++++++++++++++++-------------------- 1 files changed, 30 insertions(+), 32 deletions(-)
drivers/watchdog/mpc83xx_wdt.c +30 -32
@@ -19,11 +19,12 @@#include <linux/init.h> #include <linux/kernel.h> #include <linux/miscdevice.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/module.h> #include <linux/watchdog.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <sysdev/fsl_soc.h> struct mpc83xx_wdt {__be32 res0;
@@ -149,53 +150,42 @@ static struct miscdevice mpc83xx_wdt_miscdev = { .fops = &mpc83xx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe (struct platform_device *dev) +static int __devinit mpc83xx_wdt_probe (struct of_device *ofdev, +const struct of_device_id *match) { -struct resource *r;int ret; -unsigned int *freq = dev->dev.platform_data; +u32 freq =fsl_get_sys_freq (); -/* get a pointer to the register memory */ - r =platform_get_resource (dev,IORESOURCE_MEM ,0 ); +if (!freq || freq ==-1 ) +return -EINVAL ; -if (!r) { - ret = -ENODEV ; - goto err_out; - } - - wd_base =ioremap (r->start,sizeof (struct mpc83xx_wdt )); - -if (wd_base ==NULL ) { - ret = -ENOMEM ; - goto err_out; - } + wd_base =of_iomap (ofdev->node,0 ); +if (!wd_base) +return -ENOMEM ; ret =misc_register (&mpc83xx_wdt_miscdev);if (ret) { -printk (KERN_ERR "cannot register miscdev on minor=%d " -"(err=%d)\n" , -WATCHDOG_MINOR , ret); +pr_err ("cannot register miscdev on minor=%d (err=%d)\n" , +WATCHDOG_MINOR , ret); goto err_unmap; }/* Calculate the timeout in seconds */ if (prescale) - timeout_sec = (timeout *0x10000 ) / (*freq); + timeout_sec = (timeout *0x10000 ) / freq;else - timeout_sec = timeout / (*freq); + timeout_sec = timeout / freq; -printk (KERN_INFO "WDT driver for MPC83xx initialized. " -"mode:%s timeout=%d (%d seconds)\n" , - reset ?"reset" :"interrupt" , timeout, timeout_sec); +pr_info ("WDT driver for MPC83xx initialized. mode:%s timeout=%d " +"(%d seconds)\n" , reset ?"reset" :"interrupt" , timeout, + timeout_sec);return 0 ; - err_unmap:iounmap (wd_base); -err_out:return ret; } -static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) +static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) {misc_deregister (&mpc83xx_wdt_miscdev);iounmap (wd_base);
@@ -203,7 +193,16 @@ static int __devexit mpc83xx_wdt_remove(struct platform_device *dev)return 0 ; } -static struct platform_driver mpc83xx_wdt_driver = { +static const struct of_device_id mpc83xx_wdt_match[] = { + { + .compatible ="mpc83xx_wdt" , + }, + {}, +}; +MODULE_DEVICE_TABLE (of, mpc83xx_wdt_match); + +static struct of_platform_driver mpc83xx_wdt_driver = { + .match_table = mpc83xx_wdt_match, .probe = mpc83xx_wdt_probe, .remove =__devexit_p (mpc83xx_wdt_remove), .driver = {
@@ -214,12 +213,12 @@ static struct platform_driver mpc83xx_wdt_driver = {static int __init mpc83xx_wdt_init (void ) { -return platform_driver_register (&mpc83xx_wdt_driver); +return of_register_platform_driver (&mpc83xx_wdt_driver); } static void __exit mpc83xx_wdt_exit(void) { -platform_driver_unregister (&mpc83xx_wdt_driver); +of_unregister_platform_driver (&mpc83xx_wdt_driver); }module_init (mpc83xx_wdt_init);
@@ -229,4 +228,3 @@ MODULE_AUTHOR("Dave Updegraff, Kumar Gala");MODULE_DESCRIPTION ("Driver for watchdog timer in MPC83xx uProcessor" );MODULE_LICENSE ("GPL" );MODULE_ALIAS_MISCDEV (WATCHDOG_MINOR ); -MODULE_ALIAS ("platform:mpc83xx_wdt" );
Signature · 1 line
1.5.5.1
Re: [PATCH 2/8] [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver
Hi Anton,
Quoted 6 lines · On Thu, 15 May 2008 20:53:49 +0400 Anton Vorontsov <[email protected]>…
This patch simply converts
mpc83xx_wdtto the OF platform driver so we can directly work with the device tree without passing various stuff through platform data.Signed-off-by Anton Vorontsov <[email protected]>
Looks good.
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
PATCH v3 3/8 mpc83xx_wdt: add support for MPC86xx CPUs
In reply to Anton VorontsovOn MPC86xx the watchdog could be enabled only at power-on-reset, and could not be disabled afterwards. We must ping the watchdog from the kernel until the userspace handles it.
MPC83xx CPUs are only differ in a way that watchdog could be disabled once, but after it was enabled via software it becomes just the same as MPC86xx.
Thus, to support MPC86xx I added the kernel timer which pings the watchdog until the userspace opens it.
Since we implemented the timer, now we're able to implement proper handling for the CONFIG_WATCHDOG_NOWAYOUT case, for MPC83xx and MPC86xx.
Also move the probe code into subsys_initcall, because we want start pinging the watchdog ASAP, and misc devices are available in subsys_initcall.
--- drivers/watchdog/Kconfig | 4 +- drivers/watchdog/mpc83xx_wdt.c | 80 ++++++++++++++++++++++++++++++++++++---- 2 files changed, 74 insertions(+), 10 deletions(-)
drivers/watchdog/Kconfig +2 -2
@@ -683,8 +683,8 @@ config 8xx_WDT depends on 8xx config 83xx_WDT - tristate "MPC83xx Watchdog Timer" - depends on PPC_83xx + tristate "MPC83xx/MPC86xx Watchdog Timer" + depends on PPC_83xx || PPC_86xx config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
drivers/watchdog/mpc83xx_wdt.c +72 -8
176 lines not on this page · raw message
Signature · 1 line
1.5.5.1
PATCH v3 4/8 mpc83xx_wdt: rename to mpc8xxx_wdt
In reply to Anton VorontsovRename the driver because now we support some MPC86xx processors.
There are no changes to the mpc83xx_wdt.c file, yet. When possible, we do file renames and changes separately (because Linus once asked so, because it helps git to track the renamed files).
--- drivers/watchdog/Kconfig | 11 ++- drivers/watchdog/Makefile | 2 +- drivers/watchdog/mpc83xx_wdt.c | 294 ---------------------------------------- drivers/watchdog/mpc8xxx_wdt.c | 294 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 304 insertions(+), 297 deletions(-) delete mode 100644 drivers/watchdog/mpc83xx_wdt.c create mode 100644 drivers/watchdog/mpc8xxx_wdt.c
drivers/watchdog/Kconfig +9 -2
@@ -682,9 +682,16 @@ config 8xx_WDT tristate "MPC8xx Watchdog Timer" depends on 8xx -config 83xx_WDT - tristate "MPC83xx/MPC86xx Watchdog Timer" +config 8xxx_WDT + tristate "MPC8xxx Platform Watchdog Timer" depends on PPC_83xx || PPC_86xx + help + This driver is for a SoC level watchdog that exists on some + Freescale PowerPC processors. So far this driver supports: + - MPC83xx watchdogs + - MPC86xx watchdogs + + For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
drivers/watchdog/Makefile +1 -1
@@ -102,7 +102,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o # POWERPC Architecture obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o -obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o +obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
drivers/watchdog/mpc83xx_wdt.c deleted +0 -294
294 lines not on this page · raw message
drivers/watchdog/mpc8xxx_wdt.c new file +294 -0
294 lines not on this page · raw message
Signature · 1 line
1.5.5.1
PATCH v3 5/8 mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g
In reply to Anton Vorontsovmpc83xx_wdt.c renamed to mpc8xxx_wdt.c, now we can do various renames in the file itself.
--- drivers/watchdog/mpc8xxx_wdt.c | 104 ++++++++++++++++++++-------------------- 1 files changed, 52 insertions(+), 52 deletions(-)
drivers/watchdog/mpc8xxx_wdt.c +52 -52
@@ -1,5 +1,5 @@/* -* mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface +* mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff <[email protected]> * Kumar Gala <[email protected]>
@@ -29,7 +29,7 @@#include <linux/uaccess.h> #include <sysdev/fsl_soc.h> -struct mpc83xx_wdt { +struct mpc8xxx_wdt {__be32 res0;__be32 swcrr;/* System watchdog control register */ #define SWCRR_SWTC 0xFFFF0000/* Software Watchdog Time Count. */
@@ -42,12 +42,12 @@ struct mpc83xx_wdt {u8 res2[0xF0 ]; }; -struct mpc83xx_wdt_type { +struct mpc8xxx_wdt_type {int prescaler;bool hw_enabled; }; -static struct mpc83xx_wdt __iomem *wd_base; +static struct mpc8xxx_wdt __iomem *wd_base;static u16 timeout =0xffff ;module_param (timeout, ushort,0 );
@@ -74,7 +74,7 @@ static unsigned int timeout_sec;static unsigned long wdt_is_open;static DEFINE_SPINLOCK (wdt_spinlock); -static void mpc83xx_wdt_keepalive (void ) +static void mpc8xxx_wdt_keepalive (void ) {/* Ping the WDT */ spin_lock (&wdt_spinlock);
@@ -83,31 +83,31 @@ static void mpc83xx_wdt_keepalive(void)spin_unlock (&wdt_spinlock); } -static void mpc83xx_wdt_timer_ping (unsigned long arg); -static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); +static void mpc8xxx_wdt_timer_ping (unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0); -static void mpc83xx_wdt_timer_ping (unsigned long arg) +static void mpc8xxx_wdt_timer_ping (unsigned long arg) { -mpc83xx_wdt_keepalive (); +mpc8xxx_wdt_keepalive ();/* We're pinging it twice faster than needed, just to be sure. */ mod_timer (&wdt_timer, jiffies +HZ * timeout_sec /2 ); } -static void mpc83xx_wdt_pr_warn (const char *msg) +static void mpc8xxx_wdt_pr_warn (const char *msg) { -pr_crit ("mpc83xx_wdt: %s, expect the %s soon!\n" , msg, +pr_crit ("mpc8xxx_wdt: %s, expect the %s soon!\n" , msg, reset ?"reset" :"machine check exception" ); } -static ssize_t mpc83xx_wdt_write (struct file *file,const char __user *buf, +static ssize_t mpc8xxx_wdt_write (struct file *file,const char __user *buf,size_t count,loff_t *ppos) {if (count) -mpc83xx_wdt_keepalive (); +mpc8xxx_wdt_keepalive ();return count; } -static int mpc83xx_wdt_open (struct inode *inode,struct file *file) +static int mpc8xxx_wdt_open (struct inode *inode,struct file *file) {u32 tmp =SWCRR_SWEN ;if (test_and_set_bit (0 , &wdt_is_open))
@@ -132,17 +132,17 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file)return nonseekable_open (inode, file); } -static int mpc83xx_wdt_release (struct inode *inode,struct file *file) +static int mpc8xxx_wdt_release (struct inode *inode,struct file *file) {if (!nowayout) -mpc83xx_wdt_timer_ping (0 ); +mpc8xxx_wdt_timer_ping (0 );else -mpc83xx_wdt_pr_warn ("watchdog closed" ); +mpc8xxx_wdt_pr_warn ("watchdog closed" );clear_bit (0 , &wdt_is_open);return 0 ; } -static int mpc83xx_wdt_ioctl (struct inode *inode,struct file *file, +static int mpc8xxx_wdt_ioctl (struct inode *inode,struct file *file,unsigned int cmd,unsigned long arg) {void __user *argp = (void __user *)arg;
@@ -150,7 +150,7 @@ static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file,static struct watchdog_info ident = { .options =WDIOF_KEEPALIVEPING , .firmware_version =1 , - .identity ="MPC83xx" , + .identity ="MPC8xxx" , };switch (cmd) {
@@ -160,7 +160,7 @@ static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file,case WDIOC_GETBOOTSTATUS :return put_user (0 , p);case WDIOC_KEEPALIVE : -mpc83xx_wdt_keepalive (); +mpc8xxx_wdt_keepalive ();return 0 ;case WDIOC_GETTIMEOUT :return put_user (timeout_sec, p);
@@ -169,27 +169,27 @@ static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file, } } -static const struct file_operations mpc83xx_wdt_fops = { +static const struct file_operations mpc8xxx_wdt_fops = { .owner =THIS_MODULE , .llseek = no_llseek, - .write = mpc83xx_wdt_write, - .ioctl = mpc83xx_wdt_ioctl, - .open = mpc83xx_wdt_open, - .release = mpc83xx_wdt_release, + .write = mpc8xxx_wdt_write, + .ioctl = mpc8xxx_wdt_ioctl, + .open = mpc8xxx_wdt_open, + .release = mpc8xxx_wdt_release, }; -static struct miscdevice mpc83xx_wdt_miscdev = { +static struct miscdevice mpc8xxx_wdt_miscdev = { .minor =WATCHDOG_MINOR , .name ="watchdog" , - .fops = &mpc83xx_wdt_fops, + .fops = &mpc8xxx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe (struct of_device *ofdev, +static int __devinit mpc8xxx_wdt_probe (struct of_device *ofdev,const struct of_device_id *match) {int ret;struct device_node *np = ofdev->node; -struct mpc83xx_wdt_type *wdt_type = match->data; +struct mpc8xxx_wdt_type *wdt_type = match->data;u32 freq =fsl_get_sys_freq ();bool enabled;
@@ -202,12 +202,12 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, enabled =in_be32 (&wd_base->swcrr) &SWCRR_SWEN ;if (!enabled && wdt_type->hw_enabled) { -pr_info ("mpc83xx_wdt: could not be enabled in software\n" ); +pr_info ("mpc8xxx_wdt: could not be enabled in software\n" ); ret = -ENOSYS ; goto err_unmap; } - ret =misc_register (&mpc83xx_wdt_miscdev); + ret =misc_register (&mpc8xxx_wdt_miscdev);if (ret) {pr_err ("cannot register miscdev on minor=%d (err=%d)\n" ,WATCHDOG_MINOR , ret);
@@ -220,73 +220,73 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev,else timeout_sec = timeout / freq; -pr_info ("WDT driver for MPC83xx initialized. mode:%s timeout=%d " +pr_info ("WDT driver for MPC8xxx initialized. mode:%s timeout=%d " "(%d seconds)\n" , reset ?"reset" :"interrupt" , timeout, timeout_sec);/* * If the watchdog was previously enabled or we're running on -* MPC86xx, we should ping the wdt from the kernel until the +* MPC8xxx, we should ping the wdt from the kernel until the * userspace handles it. */ if (enabled) -mpc83xx_wdt_timer_ping (0 ); +mpc8xxx_wdt_timer_ping (0 );return 0 ; err_unmap:iounmap (wd_base);return ret; } -static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) +static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev) { -mpc83xx_wdt_pr_warn ("watchdog removed" ); +mpc8xxx_wdt_pr_warn ("watchdog removed" );del_timer_sync (&wdt_timer); -misc_deregister (&mpc83xx_wdt_miscdev); +misc_deregister (&mpc8xxx_wdt_miscdev);iounmap (wd_base);return 0 ; } -static const struct of_device_id mpc83xx_wdt_match[] = { +static const struct of_device_id mpc8xxx_wdt_match[] = { { .compatible ="mpc83xx_wdt" , - .data = &(struct mpc83xx_wdt_type ) { + .data = &(struct mpc8xxx_wdt_type ) { .prescaler =0x10000 , }, }, { .compatible ="fsl,mpc8610-wdt" , - .data = &(struct mpc83xx_wdt_type ) { + .data = &(struct mpc8xxx_wdt_type ) { .prescaler =0x10000 , .hw_enabled = true, }, }, {}, }; -MODULE_DEVICE_TABLE (of, mpc83xx_wdt_match); +MODULE_DEVICE_TABLE (of, mpc8xxx_wdt_match); -static struct of_platform_driver mpc83xx_wdt_driver = { - .match_table = mpc83xx_wdt_match, - .probe = mpc83xx_wdt_probe, - .remove =__devexit_p (mpc83xx_wdt_remove), +static struct of_platform_driver mpc8xxx_wdt_driver = { + .match_table = mpc8xxx_wdt_match, + .probe = mpc8xxx_wdt_probe, + .remove =__devexit_p (mpc8xxx_wdt_remove), .driver = { - .name ="mpc83xx_wdt" , + .name ="mpc8xxx_wdt" , .owner =THIS_MODULE , }, }; -static int __init mpc83xx_wdt_init (void ) +static int __init mpc8xxx_wdt_init (void ) { -return of_register_platform_driver (&mpc83xx_wdt_driver); +return of_register_platform_driver (&mpc8xxx_wdt_driver); } -static void __exit mpc83xx_wdt_exit(void) +static void __exit mpc8xxx_wdt_exit(void) { -of_unregister_platform_driver (&mpc83xx_wdt_driver); +of_unregister_platform_driver (&mpc8xxx_wdt_driver); } -subsys_initcall (mpc83xx_wdt_init); -module_exit (mpc83xx_wdt_exit); +subsys_initcall (mpc8xxx_wdt_init); +module_exit (mpc8xxx_wdt_exit);MODULE_AUTHOR ("Dave Updegraff, Kumar Gala" );MODULE_DESCRIPTION ("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors" );
Signature · 1 line
1.5.5.1
PATCH v3 6/8 mpc8xxx_wdt: add support for MPC8xx watchdogs
In reply to Anton VorontsovThe mpc8xxx_wdt driver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver should simply work on the MPC8xx CPUs.
MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching.
Though, this patch was only build-tested and okay to drop from this series until tested or corrected to work on the actual hardware.
--- drivers/watchdog/Kconfig | 3 ++- drivers/watchdog/mpc8xxx_wdt.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 3 deletions(-)
drivers/watchdog/Kconfig +2 -1
@@ -684,10 +684,11 @@ config 8xx_WDT config 8xxx_WDT tristate "MPC8xxx Platform Watchdog Timer" - depends on PPC_83xx || PPC_86xx + depends on PPC_8xx || PPC_83xx || PPC_86xx help This driver is for a SoC level watchdog that exists on some Freescale PowerPC processors. So far this driver supports: + - MPC8xx watchdogs - MPC83xx watchdogs - MPC86xx watchdogs
drivers/watchdog/mpc8xxx_wdt.c +9 -2
@@ -1,5 +1,5 @@/* -* mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface +* mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff <[email protected]> * Kumar Gala <[email protected]>
@@ -261,6 +261,12 @@ static const struct of_device_id mpc8xxx_wdt_match[] = { .hw_enabled = true, }, }, + { + .compatible = "fsl,mpc823-wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x800, + }, + }, {}, };MODULE_DEVICE_TABLE (of, mpc8xxx_wdt_match);
@@ -289,6 +295,7 @@ subsys_initcall(mpc8xxx_wdt_init);module_exit (mpc8xxx_wdt_exit);MODULE_AUTHOR ("Dave Updegraff, Kumar Gala" ); -MODULE_DESCRIPTION ("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors" ); +MODULE_DESCRIPTION ("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx " +"uProcessors" );MODULE_LICENSE ("GPL" );MODULE_ALIAS_MISCDEV (WATCHDOG_MINOR );
Signature · 1 line
1.5.5.1
Re: [PATCH 6/8] [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs
Hi Anton,
Quoted 6 lines
The
mpc8xxx_wdtdriver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver should simply work on the MPC8xx CPUs.
Quoted 7 lines
MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching.
Though, this patch was only build-tested and okay to drop from this series until tested or corrected to work on the actual hardware.
Signed-off-by Anton Vorontsov <[email protected]>
The driver works OK on MPC823.
One nit however ist the late initialisation of the wdt timer. I had to add two hardcoded wdt resets in the board setup, one in setup_arch and one in arch_initcall, to prevent a reset until mpc8xxx_wdt kicks in. However, IMHO this is acceptable as it only hits the 8xx series with the small prescale.
Some time ago in http://patchwork.ozlabs.org/linuxppc/patch?person=1023&id=16189,
i tried a different aproach to the problem (mainly a port of the old ARC=ppc stuff), but the code became very ugly and the wdt maintainers didn't like it very much.
So the only thing left for full 8xx support is a refactoring / cleanup of
http://patchwork.ozlabs.org/linuxppc/patch?person=1023&id=16262.
Thanks,
Jochen
Re: [PATCH 6/8] [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs
Quoted 11 lines · Jochen Friedrich
Hi Anton,
Quoted 9 lines
The
mpc8xxx_wdtdriver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver should simply work on the MPC8xx CPUs.MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching.
Quoted 6 lines
Quoted 4 lines
Though, this patch was only build-tested and okay to drop from this series until tested or corrected to work on the actual hardware.
Signed-off-by Anton Vorontsov <[email protected]>Tested-by Jochen Friedrich <[email protected]>
Thanks!
Quoted 6 lines
The driver works OK on MPC823.
One nit however ist the late initialisation of the wdt timer. I had to add two hardcoded wdt resets in the board setup, one in
setup_archand one inarch_initcall, to prevent a reset untilmpc8xxx_wdtkicks in. However, IMHO this is acceptable as it only hits the 8xx series with the small prescale.
Hm... This is strange because subsys initcalls should be called quite early... what type of initcall you're using in the board file to probe the OF bus? I guess this was machine_device_initcall, can you try the machine_subsys_initcall(), i.e. the same as we use in the driver?
If this still doesn't not work... You can try the patch attached here, and try using machine_arch_initcall to do of_platform_bus_probe(). This way wdt should be called even earlier...
Also, if u-boot enables the watchdog, it should support the keepalive too, because it might spend precious time not pinging the wdt...
drivers/watchdog/mpc8xxx_wdt.c +24 -9
@@ -207,13 +207,6 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, goto err_unmap; } - ret =misc_register (&mpc8xxx_wdt_miscdev); -if (ret) { -pr_err ("cannot register miscdev on minor=%d (err=%d)\n" , -WATCHDOG_MINOR , ret); - goto err_unmap; - } -/* Calculate the timeout in seconds */ if (prescale) timeout_sec = (timeout * wdt_type->prescaler) / freq;
@@ -234,6 +227,7 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,return 0 ; err_unmap:iounmap (wd_base); + wd_base =NULL ;return ret; }
@@ -281,17 +275,38 @@ static struct of_platform_driver mpc8xxx_wdt_driver = { }, }; +/* +* We do wdt initialization in two steps: arch_initcall probes the wdt +* very early to start pinging the watchdog (misc devices are not yet +* available), and later module_init() just registers the misc device. +*/ +static int __init mpc8xxx_wdt_init_late (void ) +{ +int ret; + +if (!wd_base) +return -ENODEV ; + + ret =misc_register (&mpc8xxx_wdt_miscdev); +if (ret) { +pr_err ("cannot register miscdev on minor=%d (err=%d)\n" , +WATCHDOG_MINOR , ret); +return ret; + } +return 0 ; +} +module_init (mpc8xxx_wdt_init_late); +static int __init mpc8xxx_wdt_init (void ) {return of_register_platform_driver (&mpc8xxx_wdt_driver); } +arch_initcall (mpc8xxx_wdt_init); static void __exit mpc8xxx_wdt_exit(void) {of_unregister_platform_driver (&mpc8xxx_wdt_driver); } - -subsys_initcall (mpc8xxx_wdt_init);module_exit (mpc8xxx_wdt_exit);MODULE_AUTHOR ("Dave Updegraff, Kumar Gala" );
PATCH v3 7/8 fsl_soc: remove mpc83xx_wdt code
In reply to Anton Vorontsovmpc83xx_wdt is the OF driver now, so we don't need fsl_soc constructor.
--- arch/powerpc/sysdev/fsl_soc.c | 46 ----------------------------------------- 1 files changed, 0 insertions(+), 46 deletions(-)
arch/powerpc/sysdev/fsl_soc.c +0 -46
@@ -545,52 +545,6 @@ err:arch_initcall (fsl_i2c_of_init);#endif -#ifdef CONFIG_PPC_83xx -static int __init mpc83xx_wdt_init (void ) -{ -struct resource r; -struct device_node *np; -struct platform_device *dev; -u32 freq =fsl_get_sys_freq (); -int ret; - - np =of_find_compatible_node (NULL ,"watchdog" ,"mpc83xx_wdt" ); - -if (!np) { - ret = -ENODEV ; - goto nodev; - } - -memset (&r,0 ,sizeof (r)); - - ret =of_address_to_resource (np,0 , &r); -if (ret) - goto err; - - dev =platform_device_register_simple ("mpc83xx_wdt" ,0 , &r,1 ); -if (IS_ERR (dev)) { - ret =PTR_ERR (dev); - goto err; - } - - ret =platform_device_add_data (dev, &freq,sizeof (freq)); -if (ret) - goto unreg; - -of_node_put (np); -return 0 ; - -unreg: -platform_device_unregister (dev); -err: -of_node_put (np); -nodev: -return ret; -} - -arch_initcall (mpc83xx_wdt_init); -#endif -static enum fsl_usb2_phy_modes determine_usb_phy (const char *phy_type) {if (!phy_type)
Signature · 1 line
1.5.5.1
PATCH v3 8/8 86xx: mpc8610_hpcd: add watchdog node
In reply to Anton Vorontsov--- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8610_hpcd.dts +5 -0
@@ -195,6 +195,11 @@ fsl,has-rstcr; }; + wdt@e4000 { + compatible = "fsl,mpc8610-wdt"; + reg = <0xe4000 0x100>; + }; + gpio@f000 { compatible = "fsl,mpc8610-gpio"; reg = <0xf000 0x100>;
Signature · 1 line
1.5.5.1
Hi Anton,
Quoted 1 line
- New patch supporting MPC8xx watchdogs (ok to drop until tested);
Unfortunately, current 2.6.26-rc2 doesn't boot at all on MPC823. I'll have to bisect which patch broke it. I hope to have some testing results, soon.
Thanks,
Jochen