Skip to contentSkip to conversation

Something is consuming power after shutdown

Bug 10797 Renato S. Yamane 6 participants 14 messages May 26, 2008 – Jun 13, 2008

lore
Share & tools
lore
#0 lore raw

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

If I shutdown my laptop using Kernel 2.6.24/25 when battery is 100%, after 12h my battery charge go to 96% (this information is checked with kpowersave and with LED available in my laptop that change color from blue to yellow when battery is not FULL).

If I shutdown this same laptop by WinXP (I have a dual boot), nothing change. So, my battery still have 100% after 12h (or more).

I see a similar problem in EeePC (the problem is with snd_hda_intel driver), but I don't have this driver loaded:
http://wiki.debian.org/DebianEeePC/HowTo/Troubleshooting#head-84d9d8a97c9ce198c59edd9cd93a05ab24fd1ff8

Best regards,
Renato S. Yamane

#1 lore raw
Quoted 11 lines · On Mon, 26 May 2008 09:59:47 -0300 "Renato S. Yamane"…

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

If I shutdown my laptop using Kernel 2.6.24/25 when battery is 100%, after 12h my battery charge go to 96% (this information is checked with kpowersave and with LED available in my laptop that change color from blue to yellow when battery is not FULL).

Quoted 5 lines

If I shutdown this same laptop by WinXP (I have a dual boot), nothing change. So, my battery still have 100% after 12h (or more).

I see a similar problem in EeePC (the problem is with snd_hda_intel driver), but I don't have this driver loaded:

the most obvious cause could be Wake-on-Lan, that leaves a part of the system active (specifically, the network card). With the "ethtool" program you can queary and set the state of this.

Similarly, but less likely, there is wake-on-serial and wake-on-usb, in theory those are possible too but I've yet to see one of those on any of my machines.

#2 lore raw
Quoted 10 lines · Arjan van de Ven
Quoted 5 lines · Renato S. Yamane

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

the most obvious cause could be Wake-on-Lan, that leaves a part of the system active (specifically, the network card). With the "ethtool" program you can queary and set the state of this.

My network card have option WOL "disabled"

# ethtool eth0 | grep Wake
        Supports Wake-on: pg
        Wake-on: d
Quoted 3 lines

Similarly, but less likely, there is wake-on-serial and wake-on-usb, in theory those are possible too but I've yet to see one of those on any of my machines.

My laptop don't have serial port and wake-on-usb is disabled too:

# cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
LID0      S4    *enabled
RP01      S4     disabled  pci:0000:00:1c.0
RP02      S4     disabled  pci:0000:00:1c.1
RP03      S4     disabled
RP04      S4     disabled
USB1      S0     disabled  pci:0000:00:1d.0
USB2      S0     disabled  pci:0000:00:1d.1
USB3      S0     disabled  pci:0000:00:1d.2
USB4      S0     disabled  pci:0000:00:1d.3
USB7      S0     disabled  pci:0000:00:1d.7
MODM      S4     disabled  pci:0000:00:1e.3
PS2K      S4     disabled  pnp:00:07

Best regards,
Renato S. Yamane

#3 lore raw
Quoted 19 lines · Renato S. Yamane
Quoted 7 lines · Arjan van de Ven
Quoted 2 lines · Renato S. Yamane

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

the most obvious cause could be Wake-on-Lan, that leaves a part of the system active (specifically, the network card). With the "ethtool" program you can queary and set the state of this.

My network card have option WOL "disabled"

# ethtool eth0 | grep Wake
        Supports Wake-on: pg
        Wake-on: d
Quoted 3 lines

Similarly, but less likely, there is wake-on-serial and wake-on-usb, in theory those are possible too but I've yet to see one of those on any of my machines.

Quoted 14 lines
# cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
LID0      S4    *enabled
RP01      S4     disabled  pci:0000:00:1c.0
RP02      S4     disabled  pci:0000:00:1c.1
RP03      S4     disabled
RP04      S4     disabled
USB1      S0     disabled  pci:0000:00:1d.0
USB2      S0     disabled  pci:0000:00:1d.1
USB3      S0     disabled  pci:0000:00:1d.2
USB4      S0     disabled  pci:0000:00:1d.3
USB7      S0     disabled  pci:0000:00:1d.7
MODM      S4     disabled  pci:0000:00:1e.3
PS2K      S4     disabled  pnp:00:07

I test two times as commented in [1] and I can see that this problem don't hapen if, before shutdown, I close LCD Display (activing LID to hibernate).

[1] <http://bugzilla.kernel.org/show_bug.cgi?id=10797#c1>

So, to shutdown laptop with no battery change, is necessary:

1) Active LID (closing LCD Display). With this, my laptop will hibernate, so is necessary wake-up again.
2) Shutdown

Best regards,
Renato S. Yamane

#4 lore raw

Re: [CRM114spam]: [Bug 10797] Something is consuming power after shutdown

In reply to Renato S. Yamane
Quoted 2 lines · * Renato S. Yamane ([email protected]) wrote:

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

Also add a Ubuntu equivalent which is:
https://bugs.launchpad.net/ubuntu/+bug/110784

(In my case a Tosh Equium A100-306 )

Quoted 7 lines

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

If I shutdown my laptop using Kernel 2.6.24/25 when battery is 100%, after 12h my battery charge go to 96% (this information is checked with kpowersave and with LED available in my laptop that change color from blue to yellow when battery is not FULL).

I haven't got the actual numbers, but I'd say mine is a little more - may be 10% from memory overnight. Certainly between a Sunday evening and a Saturday afternoon there is nothing left for it to turn back on.

Following the thread I did notice I had w-o-l enabled; I've disabled it - see if it makes any difference tonight.

Dave

Signature · 4 lines
 -----Open up your eyes, open up your mind, open up your code -------   
/ Dr. David Alan Gilbert    | Running GNU/Linux on Alpha,68K| Happy  \ 
\ gro.gilbert @ treblig.org | MIPS,x86,ARM,SPARC,PPC & HPPA | In Hex /
 \ _________________________|_____ http://www.treblig.org   |_______/
#5 lore raw
In reply to Renato S. Yamane

Hi!

Quoted 12 lines

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

After poweroff, something still working and consuming power. So I loss ~4% of my battery charge in each 12h.

If I shutdown my laptop using Kernel 2.6.24/25 when battery is 100%, after 12h my battery charge go to 96% (this information is checked with kpowersave and with LED available in my laptop that change color from blue to yellow when battery is not FULL).

Quoted 3 lines

If I shutdown this same laptop by WinXP (I have a dual boot), nothing change. So, my battery still have 100% after 12h (or more).

Try to find out which component eats power, eg. by opening the machine searching for heat.

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#6 lore raw
Quoted 10 lines · Pavel Machek

Renato S. Yamane wrote:
...

Quoted 2 lines

<http://bugzilla.kernel.org/show_bug.cgi?id=10797>
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481493>

Try to find out which component eats power, eg. by opening the machine searching for heat.

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

OK, I try do this but I think this is very difficult because demand power is very low and is not enought to do hot some component. But I will try.

I don't think that my hardware is broked because I don't have this kind of problem on Kernel <=2.6.22 or in other OS.

And other user have the same problem (cc'ed on Bug #10797)

Best regards,
Renato S. Yamane

#7 lore raw

Hi!

Quoted 9 lines
Quoted 2 lines

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

OK, I try do this but I think this is very difficult because demand power is very low and is not enought to do hot some component. But I will try.

I don't think that my hardware is broked because I don't have this kind of problem on Kernel <=2.6.22 or in other OS.

Can you try to find out when that started happening?

does it still happen with acpi=off ?

does it each too much power if you use 4second hold of power button to shut it down from running linux?

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#8 lore raw
Quoted 9 lines · Pavel Machek
Quoted 8 lines · Renato S. Yamane
Quoted 2 lines · Pavel Machek

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

OK, I try do this but I think this is very difficult because demand power is very low and is not enought to do hot some component. But I will try.

Quoted 8 lines
Quoted 3 lines

I don't think that my hardware is broked because I don't have this kind of problem on Kernel <=2.6.22 or in other OS.
Track: <http://bugzilla.kernel.org/show_bug.cgi?id=10797>

Can you try to find out when that started happening?
does it still happen with acpi=off?
does it each too much power if you use 4second hold of power button to shut it down from running linux?

With acpi=off this problem don't happening, but a lot of other problem happening (as fan control).

I will try halt my laptop holding power button today and report you tomorrow.

Best regards,
Renato S. Yamane

#9 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 17 lines · Renato S. Yamane
Quoted 8 lines · Pavel Machek
Quoted 7 lines · Renato S. Yamane
Quoted 2 lines · Pavel Machek

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

OK, I try do this but I think this is very difficult because demand power is very low and is not enought to do hot some component. But I will try.

Quoted 7 lines
Quoted 3 lines

I don't think that my hardware is broked because I don't have this kind of problem on Kernel <=2.6.22 or in other OS.
Track: <http://bugzilla.kernel.org/show_bug.cgi?id=10797>

Can you try to find out when that started happening?
does it still happen with acpi=off?
does it each too much power if you use 4second hold of power button to shut it down from running linux?

Quoted 5 lines

With acpi=off this problem don't happening, but a lot of other problem happening (as fan control).

I will try halt my laptop holding power button today and report you tomorrow.

If I hold power button to force shutdown I don't have this problem with battery charge.

Best regards,
Renato S. Yamane
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFITRDdrf2L358fCLsRAuKUAJ9N2HVzuFnOA5zDes286/F8LgPfNgCePS4Z YMWoFzYl+eF3/do1Je9oly8=
=31/g
-----END PGP SIGNATURE-----

#10 lore raw
Quoted 21 lines · Renato S. Yamane

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 17 lines · Renato S. Yamane
Quoted 15 lines · Pavel Machek
Quoted 10 lines · Renato S. Yamane
Quoted 2 lines · Pavel Machek

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

OK, I try do this but I think this is very difficult because demand power is very low and is not enought to do hot some component. But I will try.

I don't think that my hardware is broked because I don't have this kind of problem on Kernel <=2.6.22 or in other OS.
Track: <http://bugzilla.kernel.org/show_bug.cgi?id=10797>

Can you try to find out when that started happening?
does it still happen with acpi=off?
does it each too much power if you use 4second hold of power button to shut it down from running linux?

Quoted 8 lines
Quoted 5 lines

With acpi=off this problem don't happening, but a lot of other problem happening (as fan control).

I will try halt my laptop holding power button today and report you tomorrow.

If I hold power button to force shutdown I don't have this problem with battery charge.

Too bad, I can't call the hw terminally broken, then.

If you boot into init=/bin/bash (minimum drivers) will it still consume too much power after sysrq-o?

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#11 lore raw
Quoted 4 lines · Pavel Machek
Quoted 2 lines

If I hold power button to force shutdown I don't have this problem with battery charge.

Too bad, I can't call the hw terminally broken, then.

No, just the ACPI firmware :-)

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
#12 lore raw
In reply to Pavel Machek
Quoted 7 lines · Pavel Machek
Quoted 6 lines · Renato S. Yamane
Quoted 1 line · Pavel Machek

does it still happen with acpi=off?

With acpi=off this problem don't happening, but a lot of other problem happening (as fan control).

Quoted 7 lines
Quoted 2 lines

If I hold power button to force shutdown I don't have this problem with battery charge.

Too bad, I can't call the hw terminally broken, then.

If you boot into init=/bin/bash (minimum drivers) will it still consume too much power after sysrq-o?

I hold power button to force shutdown and start with init=/bin/bash, but this problem still exist :-(

You know about this?:
<http://linux.toshiba-dme.co.jp/linux/eng/develop.htm>

Best regards,
Renato S. Yamane

#13 lore raw
In reply to Pavel Machek
Quoted 2 lines · Pavel Machek

(And yes, your hw is broken; on pc it is traditionaly hw responsibility to power machine down.)

Something changed in the laptop vendor's minds about this since Vista. Very new ThinkPads also had this problem (I am not sure it has been fixed already or not).

We may have to start shutting down every device and bus on our way out for lunch when told to go into S5, now. Time will tell.

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh