AMD Dual Core vs. Quad - Power Management
Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a Phenom Quad core CPU 9550 it pulls 0.55 amps.
In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.
So - why is the Phenom pulling more power? Is it because power management software for the Phenom isn't updated yet?
Marc Perkel
Junk Email Filter dot com
http://www.junkemailfilter.com
Quoted 6 lines · On Tuesday 17 June 2008 23:00:25 Marc Perkel wrote:
Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a Phenom Quad core CPU 9550 it pulls 0.55 amps.
In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.
Not all 6000+'s have the same TDP. Maybe you have an F3 stepping 6000+ which has an 89W TDP, lower than a quad core Phenom (which is 95W only AFAICT).
Doesn't really explain the power gulf, though.
Signature · 4 lines
Cheers, Alistair. 137/1 Warrender Park Road, Edinburgh, UK.
Quoted 9 lines · Marc Perkel
Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a
Phenom Quad core CPU 9550 it pulls 0.55 amps.In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.
So - why is the Phenom pulling more power? Is it because power management software for the Phenom isn't updated yet?
At idle with CoolNQuiet on, all AMD processors seem to pull close to the same amount of power, varying between 7-11 watts. Except for the quad core processors, which pull significantly more at idle w/CnQ on than dual and single core processors.
Tom's hardware has a nice chart listing power consumption here, all his testing was done under Windows. His tests show the Phenom pulling about twice the power of the Athlon64 X2 6000+ which matches up pretty closely to your numbers.
http://www.tomshardware.com/reviews/amd-power-cpu,1925-7.html
Sounds like a question for AMD. The Phenoms seem to be pretty good except for the extra 10-11w of power draw at idle which is disappointing.
-Dave
Marc Perkel
Junk Email Filter dot com
http://www.junkemailfilter.com
Quoted 39 lines · David Rees
From: David Rees <[email protected]>
Subject: Re: AMD Dual Core vs. Quad - Power Management
To: [email protected]
Cc: [email protected]
Date: Tuesday, June 17, 2008, 4:26 PMQuoted 1 line · Marc Perkel
Been running a few tests and an AMD motherboard
booting 2.6.25 from
Quoted 1 line
flash uses 0.33 amps if the CPU is a AM2 Athlon 6000.
But if I used a
Quoted 3 lines
Phenom Quad core CPU 9550 it pulls 0.55 amps.
In theory the 9550 should pull less because it's a
lower TPD and the
Quoted 1 line
phenom processor is supposed to be smarter about power
management.
Quoted 2 lines
So - why is the Phenom pulling more power? Is it
because power
Quoted 1 line
management software for the Phenom isn't updated
yet?
At idle with CoolNQuiet on, all AMD processors seem to pull close to
the same amount of power, varying between 7-11 watts. Except for the
quad core processors, which pull significantly more at idle w/CnQ on
than dual and single core processors.Tom's hardware has a nice chart listing power consumption here, all
his testing was done under Windows. His tests show the Phenom pulling
about twice the power of the Athlon64 X2 6000+ which matches up pretty
closely to your numbers.
Quoted 8 lines
http://www.tomshardware.com/reviews/amd-power-cpu,1925-7.html
Sounds like a question for AMD. The Phenoms seem to be pretty good
except for the extra 10-11w of power draw at idle which is disappointing.-Dave
Thanks - that definitely answered my question. And I'm using b3 stepping.