Skip to contentSkip to conversation

AMD Dual Core vs. Quad - Power Management

DISCUSSION Marc Perkel 3 participants 4 messages Jun 17, 2008

lore
Share & tools
lore
#0 lore raw

Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a Phenom Quad core CPU 9550 it pulls 0.55 amps.

In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.

So - why is the Phenom pulling more power? Is it because power management software for the Phenom isn't updated yet?

Marc Perkel
Junk Email Filter dot com
http://www.junkemailfilter.com

#1 lore raw
Quoted 6 lines · On Tuesday 17 June 2008 23:00:25 Marc Perkel wrote:

Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a Phenom Quad core CPU 9550 it pulls 0.55 amps.

In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.

Not all 6000+'s have the same TDP. Maybe you have an F3 stepping 6000+ which has an 89W TDP, lower than a quad core Phenom (which is 95W only AFAICT).

Doesn't really explain the power gulf, though.

Signature · 4 lines
Cheers,
Alistair.

137/1 Warrender Park Road, Edinburgh, UK.
#2 lore raw
In reply to Marc Perkel
Quoted 9 lines · Marc Perkel

Been running a few tests and an AMD motherboard booting 2.6.25 from flash uses 0.33 amps if the CPU is a AM2 Athlon 6000. But if I used a
Phenom Quad core CPU 9550 it pulls 0.55 amps.

In theory the 9550 should pull less because it's a lower TPD and the phenom processor is supposed to be smarter about power management.

So - why is the Phenom pulling more power? Is it because power management software for the Phenom isn't updated yet?

At idle with CoolNQuiet on, all AMD processors seem to pull close to the same amount of power, varying between 7-11 watts. Except for the quad core processors, which pull significantly more at idle w/CnQ on than dual and single core processors.

Tom's hardware has a nice chart listing power consumption here, all his testing was done under Windows. His tests show the Phenom pulling about twice the power of the Athlon64 X2 6000+ which matches up pretty closely to your numbers.

http://www.tomshardware.com/reviews/amd-power-cpu,1925-7.html

Sounds like a question for AMD. The Phenoms seem to be pretty good except for the extra 10-11w of power draw at idle which is disappointing.

-Dave

#3 lore raw

Marc Perkel
Junk Email Filter dot com
http://www.junkemailfilter.com

Quoted 39 lines · David Rees

From: David Rees <[email protected]>
Subject: Re: AMD Dual Core vs. Quad - Power Management
To: [email protected]
Cc: [email protected]
Date: Tuesday, June 17, 2008, 4:26 PM

Quoted 1 line · Marc Perkel

Been running a few tests and an AMD motherboard

booting 2.6.25 from

Quoted 1 line

flash uses 0.33 amps if the CPU is a AM2 Athlon 6000.

But if I used a

Quoted 3 lines

Phenom Quad core CPU 9550 it pulls 0.55 amps.

In theory the 9550 should pull less because it's a

lower TPD and the

Quoted 1 line

phenom processor is supposed to be smarter about power

management.

Quoted 2 lines

So - why is the Phenom pulling more power? Is it

because power

Quoted 1 line

management software for the Phenom isn't updated

yet?

At idle with CoolNQuiet on, all AMD processors seem to pull close to
the same amount of power, varying between 7-11 watts. Except for the
quad core processors, which pull significantly more at idle w/CnQ on
than dual and single core processors.

Tom's hardware has a nice chart listing power consumption here, all
his testing was done under Windows. His tests show the Phenom pulling
about twice the power of the Athlon64 X2 6000+ which matches up pretty
closely to your numbers.

Quoted 8 lines

http://www.tomshardware.com/reviews/amd-power-cpu,1925-7.html

Sounds like a question for AMD. The Phenoms seem to be pretty good
except for the extra 10-11w of power draw at idle which is disappointing.

-Dave

Thanks - that definitely answered my question. And I'm using b3 stepping.