x86 BIOS interface for RTC on SGI UV
PATCH 1/1 x86 BIOS interface for RTC on SGI UV
[patch] x86 BIOS interface for RTC on SGI UV
Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.
Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.
--- arch/x86/kernel/Makefile | 1 arch/x86/kernel/bios_uv.c | 48 +++++++++++++++++++++++++++ arch/x86/kernel/genx2apic_uv_x.c | 23 +++++++++++++ include/asm-x86/uv/bios.h | 68 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 140 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
@@ -0,0 +1,68 @@ +#ifndef _ASM_X86_BIOS_H +#define _ASM_X86_BIOS_H + +/* +* BIOS layer definitions. +* +* Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/rtc.h> + +#define BIOS_FREQ_BASE 0x01000001 + +enum { +BIOS_FREQ_BASE_PLATFORM =0 , +BIOS_FREQ_BASE_INTERVAL_TIMER =1 , +BIOS_FREQ_BASE_REALTIME_CLOCK =2 +}; + +# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7) \ + do { \ + /* XXX - the real call goes here */ \ + result.status = BIOS_STATUS_UNIMPLEMENTED; \ + isrv.v0 = 0; \ + isrv.v1 = 0; \ + } while (0) + +enum { +BIOS_STATUS_SUCCESS =0 , +BIOS_STATUS_UNIMPLEMENTED =-1 , +BIOS_STATUS_EINVAL =-2 , +BIOS_STATUS_ERROR =-3 +}; + +struct uv_bios_retval { +/* +* A zero status value indicates call completed without error. +* A negative status value indicates reason of call failure. +* A positive status value indicates success but an +* informational value should be printed (e.g., "reboot for +* change to take effect"). +*/ +s64 status; +u64 v0; +u64 v1; +u64 v2; +}; + +extern long +x86_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info); +extern const char *x86_bios_strerror (long status); + +#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +23 -0
@@ -22,6 +22,7 @@#include <asm/genapic.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> +#include <asm/uv/bios.h> DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);EXPORT_PER_CPU_SYMBOL_GPL (__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);short uv_possible_blades;EXPORT_SYMBOL_GPL (uv_possible_blades); +unsigned long sn_rtc_cycles_per_second; +EXPORT_SYMBOL (sn_rtc_cycles_per_second); +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ static cpumask_t uv_target_cpus (void )
@@ -208,6 +212,23 @@ static __init void get_lowmem_redirect(uBUG (); } +static __init void uv_rtc_init (void ) +{ +long status, ticks_per_sec, drift; + + status = +x86_bios_freq_base (BIOS_FREQ_BASE_REALTIME_CLOCK , &ticks_per_sec, + &drift); +if (status !=0 || ticks_per_sec <100000 ) { +printk (KERN_WARNING +"unable to determine platform RTC clock frequency, " +"guessing.\n" ); +/* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second =1000000000000UL /30000UL ; + }else + sn_rtc_cycles_per_second = ticks_per_sec; +} +static __init void uv_system_init (void ) {union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +279,8 @@ static __init void uv_system_init(void) node_id.v =uv_read_local_mmr (UVH_NODE_ID ); gnode_upper = (((unsigned long )node_id.s.node_id) & ~((1 << n_val) -1 )) << m_val; + +uv_rtc_init ();for_each_present_cpu (cpu) { nid =cpu_to_node (cpu);
arch/x86/kernel/bios_uv.c new file +48 -0
48 lines not on this page · raw message
arch/x86/kernel/Makefile +1 -0
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC) += olpc.o # 64 bit specific files ifeq ($(CONFIG_X86_64),y) obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o + obj-y += bios_uv.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]
Quoted 1 line · Russ Anderson
[patch] x86 BIOS interface for RTC on SGI UV
[ ... ]
include/asm-x86/uv/bios.h line 39
Quoted 6 lines
include/asm-x86/uv/bios.h new file +6
-0+# define BIOS_CALL (result, a0, a1, a2, a3, a4, a5, a6, a7) \ + do { \ +/* XXX - the real call goes here */ \ + result.status =BIOS_STATUS_UNIMPLEMENTED ; \ + isrv.v0 =0 ; \ + isrv.v1 =0 ; \
isrv? should be "result" I guess?
[ ... ]
Quoted 3 lines
include/asm-x86/uv/bios.h new file +3
-0+extern long +x86_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info);
[ ... ]
Quoted 10 lines
arch/x86/kernel/genx2apic_uv_x.c +9
-0+unsigned long sn_rtc_cycles_per_second; +EXPORT_SYMBOL (sn_rtc_cycles_per_second); + +static __init void uv_rtc_init (void ) +{ +long status, ticks_per_sec, drift; + + status = + x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
arch/x86/kernel/genx2apic_uv_x.c static __init void get_lowmem_redirect(u · line 230
Quoted 10 lines
arch/x86/kernel/genx2apic_uv_x.c +10
-0+ &drift); +if (status !=0 || ticks_per_sec <100000 ) { +printk (KERN_WARNING +"unable to determine platform RTC clock frequency, " +"guessing.\n" ); +/* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second =1000000000000UL /30000UL ; + }else + sn_rtc_cycles_per_second = ticks_per_sec; +}
It seems ticks_per_sec and drift should be "unsigned long"...
Quoted 2 lines
arch/x86/kernel/bios_uv.c new file +2
-0+const char * +x86_bios_strerror (long status)
[ ... ]
arch/x86/kernel/bios_uv.c line 41
Quoted 5 lines
arch/x86/kernel/bios_uv.c new file +5
-0+long +x86_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info) +{ +struct uv_bios_retval isrv;
... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?
Rene.
Quoted 10 lines · Rene Herman
Review
Quoted 6 lines · Russ Anderson
(quoted diff) +6
-0+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7) \ + do { \ + /* XXX - the real call goes here */ \ + result.status = BIOS_STATUS_UNIMPLEMENTED; \ + isrv.v0 = 0; \ + isrv.v1 = 0; \isrv? should be "result" I guess?
Yes.
Quoted 10 lines
Quoted 10 lines
(quoted diff) +10
-0+static __init void uv_rtc_init(void) +{ + long status, ticks_per_sec, drift; + + status = + x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, + &drift); + if (status != 0 || ticks_per_sec < 100000) { + printk(KERN_WARNING + "unable to determine platform RTC clock frequency, "
Quoted 8 lines
Review
Quoted 6 lines
(quoted diff) +6
-0+ "guessing.\n"); + /* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second = 1000000000000UL / 30000UL; + } else + sn_rtc_cycles_per_second = ticks_per_sec; +}It seems
ticks_per_secand drift should be "unsigned long"...
Yes.
Quoted 5 lines
Quoted 2 lines
(quoted diff) +2
-0+const char * +x86_bios_strerror(long status)[ ... ]
Quoted 7 lines
Review
Quoted 5 lines
(quoted diff) +5
-0+long +x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second, + unsigned long *drift_info) +{ + struct uv_bios_retval isrv;... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?
The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has ia64_sal_strerror() and ia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.
Here is the updated patch.
---------------------------------------------------------------------
[patch] x86 BIOS interface for RTC on SGI UV
Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.
Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.
--- arch/x86/kernel/Makefile | 1 arch/x86/kernel/bios_uv.c | 48 +++++++++++++++++++++++++++ arch/x86/kernel/genx2apic_uv_x.c | 23 +++++++++++++ include/asm-x86/uv/bios.h | 68 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 140 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
@@ -0,0 +1,68 @@ +#ifndef _ASM_X86_BIOS_H +#define _ASM_X86_BIOS_H + +/* +* BIOS layer definitions. +* +* Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/rtc.h> + +#define BIOS_FREQ_BASE 0x01000001 + +enum { +BIOS_FREQ_BASE_PLATFORM =0 , +BIOS_FREQ_BASE_INTERVAL_TIMER =1 , +BIOS_FREQ_BASE_REALTIME_CLOCK =2 +}; + +# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7) \ + do { \ + /* XXX - the real call goes here */ \ + result.status = BIOS_STATUS_UNIMPLEMENTED; \ + result.v0 = 0; \ + result.v1 = 0; \ + } while (0) + +enum { +BIOS_STATUS_SUCCESS =0 , +BIOS_STATUS_UNIMPLEMENTED =-1 , +BIOS_STATUS_EINVAL =-2 , +BIOS_STATUS_ERROR =-3 +}; + +struct x86_bios_retval { +/* +* A zero status value indicates call completed without error. +* A negative status value indicates reason of call failure. +* A positive status value indicates success but an +* informational value should be printed (e.g., "reboot for +* change to take effect"). +*/ +s64 status; +u64 v0; +u64 v1; +u64 v2; +}; + +extern long +x86_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info); +extern const char *x86_bios_strerror (long status); + +#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +23 -0
@@ -22,6 +22,7 @@#include <asm/genapic.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> +#include <asm/uv/bios.h> DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);EXPORT_PER_CPU_SYMBOL_GPL (__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);short uv_possible_blades;EXPORT_SYMBOL_GPL (uv_possible_blades); +unsigned long sn_rtc_cycles_per_second; +EXPORT_SYMBOL (sn_rtc_cycles_per_second); +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ static cpumask_t uv_target_cpus (void )
@@ -208,6 +212,23 @@ static __init void get_lowmem_redirect(uBUG (); } +static __init void uv_rtc_init (void ) +{ +unsigned long status, ticks_per_sec, drift; + + status = +x86_bios_freq_base (BIOS_FREQ_BASE_REALTIME_CLOCK , &ticks_per_sec, + &drift); +if (status !=0 || ticks_per_sec <100000 ) { +printk (KERN_WARNING +"unable to determine platform RTC clock frequency, " +"guessing.\n" ); +/* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second =1000000000000UL /30000UL ; + }else + sn_rtc_cycles_per_second = ticks_per_sec; +} +static __init void uv_system_init (void ) {union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +279,8 @@ static __init void uv_system_init(void) node_id.v =uv_read_local_mmr (UVH_NODE_ID ); gnode_upper = (((unsigned long )node_id.s.node_id) & ~((1 << n_val) -1 )) << m_val; + +uv_rtc_init ();for_each_present_cpu (cpu) { nid =cpu_to_node (cpu);
arch/x86/kernel/bios_uv.c new file +48 -0
48 lines not on this page · raw message
arch/x86/kernel/Makefile +1 -0
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC) += olpc.o # 64 bit specific files ifeq ($(CONFIG_X86_64),y) obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o + obj-y += bios_uv.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]
Quoted 6 lines · Russ Anderson
Quoted 1 line
... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?
The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has
ia64_sal_strerror()andia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.
Ah, I see. Not much of an opinion then. x86_bios sounds a bit generic, but whatever...
Quoted 1 line
Here is the updated patch.
[ ... ]
Quoted 6 lines
include/asm-x86/uv/bios.h new file +6
-0+enum { +BIOS_STATUS_SUCCESS =0 , +BIOS_STATUS_UNIMPLEMENTED =-1 , +BIOS_STATUS_EINVAL =-2 , +BIOS_STATUS_ERROR =-3 +};
[ .. ]
arch/x86/kernel/genx2apic_uv_x.c static __init void get_lowmem_redirect(u · line 217
Quoted 7 lines
arch/x86/kernel/genx2apic_uv_x.c +6
-0+extern long +x86_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info); +static __init void uv_rtc_init (void ) +{ +unsigned long status, ticks_per_sec, drift;
*status* should remain a long :-)
Rene.
Quoted 11 lines · Rene Herman
Quoted 6 lines · Russ Anderson
Quoted 1 line
... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?
The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has
ia64_sal_strerror()andia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.Ah, I see. Not much of an opinion then.
x86_biossounds a bit generic, but whatever...
On ia64, the sal interface is an Intel standard.
On x86, the bios interface is SGI UV specific.
I'll make it uv_bios_* .
Quoted 17 lines
Quoted 1 line
Here is the updated patch.
[ ... ]
Quoted 6 lines
(quoted diff) +6
-0+enum { + BIOS_STATUS_SUCCESS = 0, + BIOS_STATUS_UNIMPLEMENTED = -1, + BIOS_STATUS_EINVAL = -2, + BIOS_STATUS_ERROR = -3 +};[ .. ]
Quoted 3 lines
(quoted diff) +3
-0+extern long +x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second, + unsigned long *drift_info);
Quoted 5 lines
Review
Quoted 3 lines
(quoted diff) +3
-0+static __init void uv_rtc_init(void) +{ + unsigned long status, ticks_per_sec, drift;*status* should remain a long :-)
Ouch. Thanks.
---------------------------------------------------------------------
[patch] x86 BIOS interface for RTC on SGI UV
Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.
Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.
--- arch/x86/kernel/Makefile | 1 arch/x86/kernel/bios_uv.c | 48 +++++++++++++++++++++++++++ arch/x86/kernel/genx2apic_uv_x.c | 24 +++++++++++++ include/asm-x86/uv/bios.h | 68 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 141 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
@@ -0,0 +1,68 @@ +#ifndef _ASM_X86_BIOS_H +#define _ASM_X86_BIOS_H + +/* +* BIOS layer definitions. +* +* Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/rtc.h> + +#define BIOS_FREQ_BASE 0x01000001 + +enum { +BIOS_FREQ_BASE_PLATFORM =0 , +BIOS_FREQ_BASE_INTERVAL_TIMER =1 , +BIOS_FREQ_BASE_REALTIME_CLOCK =2 +}; + +# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7) \ + do { \ + /* XXX - the real call goes here */ \ + result.status = BIOS_STATUS_UNIMPLEMENTED; \ + result.v0 = 0; \ + result.v1 = 0; \ + } while (0) + +enum { +BIOS_STATUS_SUCCESS =0 , +BIOS_STATUS_UNIMPLEMENTED =-1 , +BIOS_STATUS_EINVAL =-2 , +BIOS_STATUS_ERROR =-3 +}; + +struct uv_bios_retval { +/* +* A zero status value indicates call completed without error. +* A negative status value indicates reason of call failure. +* A positive status value indicates success but an +* informational value should be printed (e.g., "reboot for +* change to take effect"). +*/ +s64 status; +u64 v0; +u64 v1; +u64 v2; +}; + +extern long +uv_bios_freq_base (unsigned long which,unsigned long *ticks_per_second, +unsigned long *drift_info); +extern const char *uv_bios_strerror (long status); + +#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +24 -0
@@ -22,6 +22,7 @@#include <asm/genapic.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> +#include <asm/uv/bios.h> DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);EXPORT_PER_CPU_SYMBOL_GPL (__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);short uv_possible_blades;EXPORT_SYMBOL_GPL (uv_possible_blades); +unsigned long sn_rtc_cycles_per_second; +EXPORT_SYMBOL (sn_rtc_cycles_per_second); +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ static cpumask_t uv_target_cpus (void )
@@ -208,6 +212,24 @@ static __init void get_lowmem_redirect(uBUG (); } +static __init void uv_rtc_init (void ) +{ +unsigned long ticks_per_sec, drift; +long status; + + status = +uv_bios_freq_base (BIOS_FREQ_BASE_REALTIME_CLOCK , &ticks_per_sec, + &drift); +if (status !=0 || ticks_per_sec <100000 ) { +printk (KERN_WARNING +"unable to determine platform RTC clock frequency, " +"guessing.\n" ); +/* BIOS gives wrong value for clock freq. so guess */ + sn_rtc_cycles_per_second =1000000000000UL /30000UL ; + }else + sn_rtc_cycles_per_second = ticks_per_sec; +} +static __init void uv_system_init (void ) {union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +280,8 @@ static __init void uv_system_init(void) node_id.v =uv_read_local_mmr (UVH_NODE_ID ); gnode_upper = (((unsigned long )node_id.s.node_id) & ~((1 << n_val) -1 )) << m_val; + +uv_rtc_init ();for_each_present_cpu (cpu) { nid =cpu_to_node (cpu);
arch/x86/kernel/bios_uv.c new file +48 -0
48 lines not on this page · raw message
arch/x86/kernel/Makefile +1 -0
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC) += olpc.o # 64 bit specific files ifeq ($(CONFIG_X86_64),y) obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o + obj-y += bios_uv.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]
Quoted 1 line · Russ Anderson
Ouch. Thanks.
Yep, should do. Pestering you about the include guard maybe missing a _UV in there would be going overboard...
include/asm-x86/uv/bios.h line 2
Quoted 7 lines
Index:
linux/include/asm-x86/uv/bios.h
===================================================================include/asm-x86/uv/bios.h new file +2
-0@@ -0,0 +1,68 @@ +#ifndef _ASM_X86_BIOS_H +#define _ASM_X86_BIOS_H
Rene.
H. Peter Anvin
reviewerQuoted 10 lines · Russ Anderson
[patch] x86 BIOS interface for RTC on SGI UV
Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in
uv/bios.handbios_uv.c.Note that
BIOS_CALL()is just a stub for now. The bios side is being worked on.
Do you have a proposed specification that could be reviewed before it is cast in stone?
-hpa
Quoted 9 lines · H. Peter Anvin
Quoted 8 lines · Russ Anderson
[patch] x86 BIOS interface for RTC on SGI UV
Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in
uv/bios.handbios_uv.c.
Quoted 6 lines
Quoted 3 lines
Note that
BIOS_CALL()is just a stub for now. The bios side is being worked on.Do you have a proposed specification that could be reviewed before it is cast in stone?
I would like to follow the ia64 SAL spec (http://download.intel.com/design/itanium/specupdt/245359.pdf).
There is no corresponding Intel spec for x86_64.
For examples of what I would like, see the ia64 files:include/asm-ia64/sal.h, include/asm-ia64/sn/sn_sal.h, and arch/ia64/kernel/sal.c.
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]