Skip to contentSkip to conversation

x86 BIOS interface for RTC on SGI UV

PATCH In review Russ Anderson 3 participants 8 messages Jul 9, 2008 – Jul 10, 2008 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86 BIOS interface for RTC on SGI UV

[patch] x86 BIOS interface for RTC on SGI UV

Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.

---
 arch/x86/kernel/Makefile         |    1 
 arch/x86/kernel/bios_uv.c        |   48 +++++++++++++++++++++++++++
 arch/x86/kernel/genx2apic_uv_x.c |   23 +++++++++++++
 include/asm-x86/uv/bios.h        |   68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 140 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
Index: linux/include/asm-x86/uv/bios.h
===================================================================
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_BIOS_H
+#define _ASM_X86_BIOS_H
+
+/*
+ * BIOS layer definitions.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/rtc.h>
+
+#define BIOS_FREQ_BASE			0x01000001
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		isrv.v0 = 0;						\
+		isrv.v1 = 0;						\
+	} while (0)
+
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};
+
+struct uv_bios_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
+extern const char *x86_bios_strerror(long status);
+
+#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +23 -0
Index: linux/arch/x86/kernel/genx2apic_uv_x.c
===================================================================
@@ -22,6 +22,7 @@
 #include <asm/genapic.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -208,6 +212,23 @@ static __init void get_lowmem_redirect(u
 	BUG();
 }
 
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +279,8 @@ static __init void uv_system_init(void)
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
+
+	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
 		nid = cpu_to_node(cpu);
arch/x86/kernel/bios_uv.c new file +48 -0

48 lines not on this page · raw message

arch/x86/kernel/Makefile +1 -0
Index: linux/arch/x86/kernel/Makefile
===================================================================
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]
#1 lore raw
Quoted 1 line · Russ Anderson

[patch] x86 BIOS interface for RTC on SGI UV

[ ... ]

include/asm-x86/uv/bios.h line 39

Quoted 6 lines
include/asm-x86/uv/bios.h new file +6 -0
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		isrv.v0 = 0;						\
+		isrv.v1 = 0;						\

isrv? should be "result" I guess?

[ ... ]

Quoted 3 lines
include/asm-x86/uv/bios.h new file +3 -0
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);

[ ... ]

Quoted 10 lines
arch/x86/kernel/genx2apic_uv_x.c +9 -0
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,

arch/x86/kernel/genx2apic_uv_x.c static __init void get_lowmem_redirect(u · line 230

Quoted 10 lines
arch/x86/kernel/genx2apic_uv_x.c +10 -0
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}

It seems ticks_per_sec and drift should be "unsigned long"...

Quoted 2 lines
arch/x86/kernel/bios_uv.c new file +2 -0
+const char *
+x86_bios_strerror(long status)

[ ... ]

arch/x86/kernel/bios_uv.c line 41

Quoted 5 lines
arch/x86/kernel/bios_uv.c new file +5 -0
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info)
+{
+	struct uv_bios_retval isrv;

... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?

Rene.

#2 lore raw
Quoted 10 lines · Rene Herman

Review

Quoted 6 lines · Russ Anderson
(quoted diff) +6 -0
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		isrv.v0 = 0;						\
+		isrv.v1 = 0;						\

isrv? should be "result" I guess?

Yes.

Quoted 10 lines
Quoted 10 lines
(quoted diff) +10 -0
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
Quoted 8 lines

Review

Quoted 6 lines
(quoted diff) +6 -0
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}

It seems ticks_per_sec and drift should be "unsigned long"...

Yes.

Quoted 5 lines
Quoted 2 lines
(quoted diff) +2 -0
+const char *
+x86_bios_strerror(long status)

[ ... ]

Quoted 7 lines

Review

Quoted 5 lines
(quoted diff) +5 -0
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info)
+{
+	struct uv_bios_retval isrv;

... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?

The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has ia64_sal_strerror() and ia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.

Here is the updated patch.

---------------------------------------------------------------------
[patch] x86 BIOS interface for RTC on SGI UV

Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.

---
 arch/x86/kernel/Makefile         |    1 
 arch/x86/kernel/bios_uv.c        |   48 +++++++++++++++++++++++++++
 arch/x86/kernel/genx2apic_uv_x.c |   23 +++++++++++++
 include/asm-x86/uv/bios.h        |   68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 140 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
Index: linux/include/asm-x86/uv/bios.h
===================================================================
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_BIOS_H
+#define _ASM_X86_BIOS_H
+
+/*
+ * BIOS layer definitions.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/rtc.h>
+
+#define BIOS_FREQ_BASE			0x01000001
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		result.v0 = 0;						\
+		result.v1 = 0;						\
+	} while (0)
+
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};
+
+struct x86_bios_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
+extern const char *x86_bios_strerror(long status);
+
+#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +23 -0
Index: linux/arch/x86/kernel/genx2apic_uv_x.c
===================================================================
@@ -22,6 +22,7 @@
 #include <asm/genapic.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -208,6 +212,23 @@ static __init void get_lowmem_redirect(u
 	BUG();
 }
 
+static __init void uv_rtc_init(void)
+{
+	unsigned long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +279,8 @@ static __init void uv_system_init(void)
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
+
+	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
 		nid = cpu_to_node(cpu);
arch/x86/kernel/bios_uv.c new file +48 -0

48 lines not on this page · raw message

arch/x86/kernel/Makefile +1 -0
Index: linux/arch/x86/kernel/Makefile
===================================================================
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]
#3 lore raw
Quoted 6 lines · Russ Anderson
Quoted 1 line

... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?

The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has ia64_sal_strerror() and ia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.

Ah, I see. Not much of an opinion then. x86_bios sounds a bit generic, but whatever...

Quoted 1 line

Here is the updated patch.

[ ... ]

Quoted 6 lines
include/asm-x86/uv/bios.h new file +6 -0
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};

[ .. ]

arch/x86/kernel/genx2apic_uv_x.c static __init void get_lowmem_redirect(u · line 217

Quoted 7 lines
arch/x86/kernel/genx2apic_uv_x.c +6 -0
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
 
+static __init void uv_rtc_init(void)
+{
+	unsigned long status, ticks_per_sec, drift;

*status* should remain a long :-)

Rene.

#4 lore raw
Quoted 11 lines · Rene Herman
Quoted 6 lines · Russ Anderson
Quoted 1 line

... and wouldn't uv_bios_strerror/uv_bios_freq_base be better names?

The plan is for both x86 and ia64 versions of uv, with this being the x86 version. The ia64 version has ia64_sal_strerror() and ia64_sal_freq_base(). Hence the x86_bios_* naming convention. I'm not strongly tied to that convention, it just seemed logical.

Ah, I see. Not much of an opinion then. x86_bios sounds a bit generic, but whatever...

On ia64, the sal interface is an Intel standard.
On x86, the bios interface is SGI UV specific.

I'll make it uv_bios_* .

Quoted 17 lines
Quoted 1 line

Here is the updated patch.

[ ... ]

Quoted 6 lines
(quoted diff) +6 -0
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};

[ .. ]

Quoted 3 lines
(quoted diff) +3 -0
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
Quoted 5 lines

Review

Quoted 3 lines
(quoted diff) +3 -0
+static __init void uv_rtc_init(void)
+{
+	unsigned long status, ticks_per_sec, drift;

*status* should remain a long :-)

Ouch. Thanks.

---------------------------------------------------------------------
[patch] x86 BIOS interface for RTC on SGI UV

Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.

---
 arch/x86/kernel/Makefile         |    1 
 arch/x86/kernel/bios_uv.c        |   48 +++++++++++++++++++++++++++
 arch/x86/kernel/genx2apic_uv_x.c |   24 +++++++++++++
 include/asm-x86/uv/bios.h        |   68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 141 insertions(+)
include/asm-x86/uv/bios.h new file +68 -0
Index: linux/include/asm-x86/uv/bios.h
===================================================================
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_BIOS_H
+#define _ASM_X86_BIOS_H
+
+/*
+ * BIOS layer definitions.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/rtc.h>
+
+#define BIOS_FREQ_BASE			0x01000001
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		result.v0 = 0;						\
+		result.v1 = 0;						\
+	} while (0)
+
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};
+
+struct uv_bios_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+extern long
+uv_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
+extern const char *uv_bios_strerror(long status);
+
+#endif /* _ASM_X86_BIOS_H */
arch/x86/kernel/genx2apic_uv_x.c +24 -0
Index: linux/arch/x86/kernel/genx2apic_uv_x.c
===================================================================
@@ -22,6 +22,7 @@
 #include <asm/genapic.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -38,6 +39,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -208,6 +212,24 @@ static __init void get_lowmem_redirect(u
 	BUG();
 }
 
+static __init void uv_rtc_init(void)
+{
+	unsigned long ticks_per_sec, drift;
+	long status;
+
+	status =
+	    uv_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
@@ -258,6 +280,8 @@ static __init void uv_system_init(void)
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
+
+	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
 		nid = cpu_to_node(cpu);
arch/x86/kernel/bios_uv.c new file +48 -0

48 lines not on this page · raw message

arch/x86/kernel/Makefile +1 -0
Index: linux/arch/x86/kernel/Makefile
===================================================================
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]
#5 lore raw
Quoted 1 line · Russ Anderson

Ouch. Thanks.

Yep, should do. Pestering you about the include guard maybe missing a _UV in there would be going overboard...

include/asm-x86/uv/bios.h line 2

Quoted 7 lines

Index: linux/include/asm-x86/uv/bios.h
===================================================================

include/asm-x86/uv/bios.h new file +2 -0
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_BIOS_H
+#define _ASM_X86_BIOS_H

Rene.

#6 lore raw
In reply to Russ Anderson
Quoted 10 lines · Russ Anderson

[patch] x86 BIOS interface for RTC on SGI UV

Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.

Do you have a proposed specification that could be reviewed before it is cast in stone?

-hpa

#7 lore raw
Quoted 9 lines · H. Peter Anvin
Quoted 8 lines · Russ Anderson

[patch] x86 BIOS interface for RTC on SGI UV

Real-time code needs to know the number of cycles per second on SGI UV. The information is provided via a run time BIOS call. This patch provides the linux side of that interface. This is the first of several run time BIOS calls to be defined in uv/bios.h and bios_uv.c.

Quoted 6 lines
Quoted 3 lines

Note that BIOS_CALL() is just a stub for now. The bios side is being worked on.

Do you have a proposed specification that could be reviewed before it is cast in stone?

I would like to follow the ia64 SAL spec (http://download.intel.com/design/itanium/specupdt/245359.pdf).
There is no corresponding Intel spec for x86_64.

For examples of what I would like, see the ia64 files:
include/asm-ia64/sal.h, include/asm-ia64/sn/sn_sal.h, and arch/ia64/kernel/sal.c.

Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]