ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
PATCH v2 1/1 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands and glacier.
---
v2:
- Add description for CFG_I2C_DTT_ADDR to README
README | 6 ++++++ drivers/hwmon/lm75.c | 4 ++++ 2 files changed, 10 insertions(+), 0 deletions(-)
README +6 -0
@@ -1392,6 +1392,12 @@ The following options need to be configured: If defined, then this indicates the I2C bus number for the DTT. If not defined, then U-Boot assumes that DTT is on I2C bus 0. + CFG_I2C_DTT_ADDR: + + If defined, specifies the I2C address of the DTT device. + If not defined, then U-Boot uses predefined value for + specified DTT device. + CONFIG_FSL_I2C Define this option if you want to use Freescale's I2C driver in
drivers/hwmon/lm75.c +4 -0
@@ -38,7 +38,11 @@/* * Device code */ +#if defined(CFG_I2C_DTT_ADDR ) +#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR +#else #define DTT_I2C_DEV_CODE 0x48/* ON Semi's LM75 device */ +#endif #define DTT_READ_TEMP 0x0#define DTT_CONFIG 0x1#define DTT_TEMP_HYST 0x2
Signature · 1 line
1.5.5
PATCH v2 1/1 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
Victor,
Quoted 2 lines · Victor Gallardo
On AMCC Arches board
DTT_I2C_DEV_CODEis different then canyonlands and glacier.
This patch is not really ppc4xx related, so please replace the "ppc4xx:" from the subject line with "DTT:".
Other than this:
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
PATCH v2 1/1 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
Hello Stefan,
Quoted 10 lines · Victor Gallardo
Quoted 2 lines
On AMCC Arches board
DTT_I2C_DEV_CODEis different then canyonlands and glacier.This patch is not really ppc4xx related, so please replace the "ppc4xx:" from the subject line with "DTT:".
Other than this:
Acked-by Stefan Roese sr at denx.de
You are correct. I should have used DTT instead. Sorry about that.
Wolfgang has accepted in his tree. Do I still need to resubmit to get it in your tree?
Thanks,
Victor Gallardo
PATCH v2 1/1 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
Quoted 11 lines · Victor Gallardo
Quoted 9 lines
Quoted 2 lines
On AMCC Arches board
DTT_I2C_DEV_CODEis different then canyonlands and glacier.This patch is not really ppc4xx related, so please replace the "ppc4xx:" from the subject line with "DTT:".
Other than this:
Acked-by Stefan Roese sr at denx.deYou are correct. I should have used DTT instead. Sorry about that.
No problem.
Quoted 2 lines
Wolfgang has accepted in his tree. Do I still need to resubmit to get it in your tree?
No, its ok. But please use the correct subject next time.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Wolfgang Denk
AppliedPATCH v2 1/1 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
In reply to Victor GallardoDear Victor Gallardo,
Quoted 10 lines · In message <[email protected]> you wrote:
On AMCC Arches board
DTT_I2C_DEV_CODEis different then canyonlands and glacier.Signed-off-by Victor Gallardo <[email protected]>---
v2:
- Add description forCFG_I2C_DTT_ADDRto READMEREADME | 6 ++++++ drivers/hwmon/lm75.c | 4 ++++ 2 files changed, 10 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The bad reputation UNIX has gotten is totally undeserved, laid on by people who don't understand, who have not gotten in there and tried anything." -- Jim Joyce, owner of Jim Joyce's UNIX Bookstore