Skip to contentSkip to conversation

: cxgb3: Use SKB list interfaces instead of home-grown implementation.

PATCH In review David Miller 1 participant 1 message Sep 23, 2008

Subsystems (2)
lore
Share & tools
lore

David Miller

author maintainer
#0 lore raw

PATCH 7/7 : cxgb3: Use SKB list interfaces instead of home-grown implementation.

cxgb3: Use SKB list interfaces instead of home-grown implementation.

---
 drivers/net/cxgb3/adapter.h |    3 +-
 drivers/net/cxgb3/l2t.c     |   39 ++++++++++++++++---------------------
 drivers/net/cxgb3/l2t.h     |    3 +-
 drivers/net/cxgb3/sge.c     |   45 ++++++++++++++++++++++---------------------
 4 files changed, 42 insertions(+), 48 deletions(-)
drivers/net/cxgb3/adapter.h +1 -2
index 2711404..4f5cc69 100644
@@ -124,8 +124,7 @@ struct sge_rspq {		/* state for an SGE response queue */
 	dma_addr_t phys_addr;	/* physical address of the ring */
 	unsigned int cntxt_id;	/* SGE context id for the response q */
 	spinlock_t lock;	/* guards response processing */
-	struct sk_buff *rx_head;	/* offload packet receive queue head */
-	struct sk_buff *rx_tail;	/* offload packet receive queue tail */
+	struct sk_buff_head rx_queue; /* offload packet receive queue */
 	struct sk_buff *pg_skb; /* used to build frag list in napi handler */
 
 	unsigned long offload_pkts;
drivers/net/cxgb3/l2t.c +17 -22
index 825e510..b2c5314 100644
@@ -86,6 +86,7 @@ static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb,
 				  struct l2t_entry *e)
 {
 	struct cpl_l2t_write_req *req;
+	struct sk_buff *tmp;
 
 	if (!skb) {
 		skb = alloc_skb(sizeof(*req), GFP_ATOMIC);
@@ -103,13 +104,11 @@ static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb,
 	memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac));
 	skb->priority = CPL_PRIORITY_CONTROL;
 	cxgb3_ofld_send(dev, skb);
-	while (e->arpq_head) {
-		skb = e->arpq_head;
-		e->arpq_head = skb->next;
-		skb->next = NULL;
+
+	skb_queue_walk_safe(&e->arpq, skb, tmp) {
+		__skb_unlink(skb, &e->arpq);
 		cxgb3_ofld_send(dev, skb);
 	}
-	e->arpq_tail = NULL;
 	e->state = L2T_STATE_VALID;
 
 	return 0;
@@ -121,12 +120,7 @@ static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb,
  */
 static inline void arpq_enqueue(struct l2t_entry *e, struct sk_buff *skb)
 {
-	skb->next = NULL;
-	if (e->arpq_head)
-		e->arpq_tail->next = skb;
-	else
-		e->arpq_head = skb;
-	e->arpq_tail = skb;
+	__skb_queue_tail(&e->arpq, skb);
 }
 
 int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb,
@@ -167,7 +161,7 @@ again:
 				break;
 
 			spin_lock_bh(&e->lock);
-			if (e->arpq_head)
+			if (!skb_queue_empty(&e->arpq))
 				setup_l2e_send_pending(dev, skb, e);
 			else	/* we lost the race */
 				__kfree_skb(skb);
@@ -357,14 +351,14 @@ EXPORT_SYMBOL(t3_l2t_get);
  * XXX: maybe we should abandon the latter behavior and just require a failure
  * handler.
  */
-static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff *arpq)
+static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff_head *arpq)
 {
-	while (arpq) {
-		struct sk_buff *skb = arpq;
+	struct sk_buff *skb, *tmp;
+
+	skb_queue_walk_safe(arpq, skb, tmp) {
 		struct l2t_skb_cb *cb = L2T_SKB_CB(skb);
 
-		arpq = skb->next;
-		skb->next = NULL;
+		__skb_unlink(skb, arpq);
 		if (cb->arp_failure_handler)
 			cb->arp_failure_handler(dev, skb);
 		else
@@ -378,8 +372,8 @@ static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff *arpq)
  */
 void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh)
 {
+	struct sk_buff_head arpq;
 	struct l2t_entry *e;
-	struct sk_buff *arpq = NULL;
 	struct l2t_data *d = L2DATA(dev);
 	u32 addr = *(u32 *) neigh->primary_key;
 	int ifidx = neigh->dev->ifindex;
@@ -395,6 +389,8 @@ void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh)
 	return;
 
 found:
+	__skb_queue_head_init(&arpq);
+
 	read_unlock(&d->lock);
 	if (atomic_read(&e->refcnt)) {
 		if (neigh != e->neigh)
@@ -402,8 +398,7 @@ found:
 
 		if (e->state == L2T_STATE_RESOLVING) {
 			if (neigh->nud_state & NUD_FAILED) {
-				arpq = e->arpq_head;
-				e->arpq_head = e->arpq_tail = NULL;
+				skb_queue_splice_init(&e->arpq, &arpq);
 			} else if (neigh->nud_state & (NUD_CONNECTED|NUD_STALE))
 				setup_l2e_send_pending(dev, NULL, e);
 		} else {
@@ -415,8 +410,8 @@ found:
 	}
 	spin_unlock_bh(&e->lock);
 
-	if (arpq)
-		handle_failed_resolution(dev, arpq);
+	if (!skb_queue_empty(&arpq))
+		handle_failed_resolution(dev, &arpq);
 }
 
 struct l2t_data *t3_init_l2t(unsigned int l2t_capacity)
drivers/net/cxgb3/l2t.h +1 -2
index d790013..42ce65f 100644
@@ -64,8 +64,7 @@ struct l2t_entry {
 	struct neighbour *neigh;	/* associated neighbour */
 	struct l2t_entry *first;	/* start of hash chain */
 	struct l2t_entry *next;	/* next l2t_entry on chain */
-	struct sk_buff *arpq_head;	/* queue of packets awaiting resolution */
-	struct sk_buff *arpq_tail;
+	struct sk_buff_head arpq;	/* queue of packets awaiting resolution */
 	spinlock_t lock;
 	atomic_t refcnt;	/* entry reference count */
 	u8 dmac[6];		/* neighbour's MAC address */
drivers/net/cxgb3/sge.c +23 -22

83 lines not on this page · raw message

Signature · 1 line
1.5.6.5