Skip to contentSkip to conversation

Developing Tux3 with UML

DISCUSSION Daniel Phillips 1 participant 1 message Nov 30, 2008 VFS

lore
Share & tools
lore
#0 lore raw

Hi,

Running the Tux3 kernel code under UML is easy, fast and safe. Here is a recipe where you can be up and running in about ten minutes from a standing start:

   # get a kernel tree
   wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.26.5.tar.bz2
   tar -xjf linux-2.6.26.5.tar.bz2
   cd linux-2.6.26.5
   # get the latest tux3 patch and patch the kernel
   wget http://tux3.org/patches/tux3-2.6.26.5
   patch <tux3-2.6.26.5 -p1
   # build uml linux with tux3
   make defconfig ARCH=um
   make linux ARCH=um CONFIG_TUX3=y
   # get a root filesystem
   wget http://tux3.org/downloads/tuxroot.tar.bz2
   # make a tux3 filesystem in a file
   dd if=/dev/zero of=testdev bs=1M count=1
   tux3 mkfs testdev
   # boot uml using loop back on the root fs and tux3 test fs
   tar -xjf tuxroot.tar.bz2
   ./linux ubda=tuxroot ubdb=testdev

Log in to uml as root and:

mount /dev/ubdb /mnt
ls -l /mnt

To debug tux3/uml under gdb:
gdb -args ./linux ubda=tuxroot ubdb=testdev
run
cont <a bunch of times, don't ask>
<log in>

You can also run uml using real partitions for root and test:

./linux ubda=/dev/sdaX ubdb=/dev/sdaX

The only thing that needs to be special about the root filesystem is, /etc/inittab has to refer to the uml ttys. See umlroot/etc/inittab.

Regards,

Daniel