Skip to contentSkip to conversation

netdev: gianfar: add MII ioctl handler

PATCH Applied [email protected] 2 participants 2 messages Jan 9, 2009 – Jan 10, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/4 netdev: gianfar: add MII ioctl handler

From: Clifford Wolf <[email protected]>

This is the same kind of wrapper that can also be found in many other network device drivers.

Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.

---

 drivers/net/gianfar.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/net/gianfar.c renamed from drivers/net/gianfar.c~netdev-gianfar-add-mii-ioctl-handler +15 -0
diff -puN drivers/net/gianfar.c~netdev-gianfar-add-mii-ioctl-handler drivers/net/gianfar.c
@@ -296,6 +296,20 @@ err_out:
 	return err;
 }
 
+/* Ioctl MII Interface */
+static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+}
+
 /* Set up the ethernet device structure, private data,
  * and anything else we need before we start */
 static int gfar_probe(struct of_device *ofdev,
@@ -366,6 +380,7 @@ static int gfar_probe(struct of_device *
 	dev->set_multicast_list = gfar_set_multi;
 
 	dev->ethtool_ops = &gfar_ethtool_ops;
+	dev->do_ioctl = gfar_ioctl;
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		priv->rx_csum_enable = 1;

_