netdev: gianfar: add MII ioctl handler
Subsystems (2)
PATCH 4/4 netdev: gianfar: add MII ioctl handler
From: Clifford Wolf <[email protected]>
This is the same kind of wrapper that can also be found in many other network device drivers.
Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.
Signed-off-by Clifford Wolf <[email protected]>
Signed-off-by Andrew Morton <[email protected]>
---
drivers/net/gianfar.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/net/gianfar.c renamed from drivers/net/gianfar.c~netdev-gianfar-add-mii-ioctl-handler +15 -0
@@ -296,6 +296,20 @@ err_out:return err; } +/* Ioctl MII Interface */ +static int gfar_ioctl (struct net_device *dev,struct ifreq *rq,int cmd) +{ +struct gfar_private *priv =netdev_priv (dev); + +if (!netif_running (dev)) +return -EINVAL ; + +if (!priv->phydev) +return -ENODEV ; + +return phy_mii_ioctl (priv->phydev,if_mii (rq), cmd); +} +/* Set up the ethernet device structure, private data, * and anything else we need before we start */ static int gfar_probe(struct of_device *ofdev,
@@ -366,6 +380,7 @@ static int gfar_probe(struct of_device * dev->set_multicast_list = gfar_set_multi; dev->ethtool_ops = &gfar_ethtool_ops; + dev->do_ioctl = gfar_ioctl;if (priv->device_flags &FSL_GIANFAR_DEV_HAS_CSUM ) { priv->rx_csum_enable =1 ;
_
Applied.