powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
PATCH 1/1 powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/ directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed into arch/powerpc/platforms/83xx/.
---
This is git patch.
arch/powerpc/platforms/83xx/Makefile | 1 +
.../powerpc/platforms/83xx}/mcu_mpc8349emitx.c | 0
arch/powerpc/platforms/Kconfig | 11 +++++++++++
drivers/i2c/chips/Kconfig | 11 -----------
drivers/i2c/chips/Makefile | 1 -
5 files changed, 12 insertions(+), 12 deletions(-)
rename {drivers/i2c/chips => arch/powerpc/platforms/83xx}/mcu_mpc8349emitx.c (100%)arch/powerpc/platforms/83xx/Makefile +1 -0
@@ -3,6 +3,7 @@ # obj-y := misc.o usb.o obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c renamed from drivers/i2c/chips/mcu_mpc8349emitx.c +0 -0
arch/powerpc/platforms/Kconfig +11 -0
@@ -323,4 +323,15 @@ config SIMPLE_GPIO chip-selects, Ethernet/USB PHY's power and various other small on-board peripherals. +config MCU_MPC8349EMITX + tristate "MPC8349E-mITX MCU driver" + depends on I2C && PPC_83xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + endmenu
drivers/i2c/chips/Kconfig +0 -11
@@ -174,15 +174,4 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. -config MCU_MPC8349EMITX - tristate "MPC8349E-mITX MCU driver" - depends on I2C && PPC_83xx - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here to enable soft power-off functionality on the Freescale - boards with the MPC8349E-mITX-compatible MCU chips. This driver will - also register MCU GPIOs with the generic GPIO API, so you'll able - to use MCU pins as GPIOs. - endmenu
drivers/i2c/chips/Makefile +0 -1
@@ -22,7 +22,6 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o -obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG
Signature · 1 line
1.5.6.5
A message that is not in the archive (sent off-list or not yet received): 20090111165136.GA26096-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org
PATCH 1/1 powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/ directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed into arch/powerpc/platforms/83xx/.
---
The same patch but suitable for patch(1).
arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c | 209 ++++++++++++++++++++++++ arch/powerpc/platforms/Kconfig | 11 ++ drivers/i2c/chips/Kconfig | 11 -- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/mcu_mpc8349emitx.c | 209 ------------------------ 6 files changed, 221 insertions(+), 221 deletions(-) create mode 100644 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c delete mode 100644 drivers/i2c/chips/mcu_mpc8349emitx.c
arch/powerpc/platforms/83xx/Makefile +1 -0
@@ -3,6 +3,7 @@ # obj-y := misc.o usb.o obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c new file +209 -0
209 lines not on this page · raw message
arch/powerpc/platforms/Kconfig +11 -0
@@ -323,4 +323,15 @@ config SIMPLE_GPIO chip-selects, Ethernet/USB PHY's power and various other small on-board peripherals. +config MCU_MPC8349EMITX + tristate "MPC8349E-mITX MCU driver" + depends on I2C && PPC_83xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + endmenu
drivers/i2c/chips/Kconfig +0 -11
@@ -174,15 +174,4 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. -config MCU_MPC8349EMITX - tristate "MPC8349E-mITX MCU driver" - depends on I2C && PPC_83xx - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here to enable soft power-off functionality on the Freescale - boards with the MPC8349E-mITX-compatible MCU chips. This driver will - also register MCU GPIOs with the generic GPIO API, so you'll able - to use MCU pins as GPIOs. - endmenu
drivers/i2c/chips/Makefile +0 -1
@@ -22,7 +22,6 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o -obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG
drivers/i2c/chips/mcu_mpc8349emitx.c deleted +0 -209
209 lines not on this page · raw message
Signature · 1 line
1.5.6.5
A message that is not in the archive (sent off-list or not yet received): 20090111165539.GA27223-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org
Kumar Gala
AppliedQuoted 12 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>---
The same patch but suitable for patch(1).
arch/powerpc/platforms/83xx/Makefile| 1 +arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c| 209 +++++++++++++++
+++++++++
Quoted 8 lines
arch/powerpc/platforms/Kconfig | 11 ++ drivers/i2c/chips/Kconfig | 11 -- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/mcu_mpc8349emitx.c | 209 ------------------------ 6 files changed, 221 insertions(+), 221 deletions(-)create mode 100644
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.cdelete mode 100644drivers/i2c/chips/mcu_mpc8349emitx.c
applied
- k
Quoted 25 lines · Kumar Gala
Quoted 13 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/
directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>---
The same patch but suitable for patch(1).
arch/powerpc/platforms/83xx/Makefile| 1 +arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c| 209 +++++++++++++++
+++++++++Quoted 8 lines
arch/powerpc/platforms/Kconfig | 11 ++ drivers/i2c/chips/Kconfig | 11 -- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/mcu_mpc8349emitx.c | 209 ------------------------ 6 files changed, 221 insertions(+), 221 deletions(-)create mode 100644
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.cdelete mode 100644drivers/i2c/chips/mcu_mpc8349emitx.c
Quoted 1 line
applied
Great, thanks Anton and Kumar!
Signature · 1 line
Jean Delvare
Hi Anton,
Quoted 5 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>
Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
Signature · 1 line
Jean Delvare
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines · Jean Delvare
Hi Anton,
Quoted 5 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
As the patch adds some code to arch/powerpc/, I believe Kumar would want to merge it into his powerpc tree. In that case I think we'll need your Acked-by line for formality.
But let's wait for Kumar's decision.
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
A message that is not in the archive (sent off-list or not yet received): 20090111172410.GA7106-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org
Jean Delvare
Acked-byQuoted 8 lines · Anton Vorontsov
Quoted 7 lines · Jean Delvare
Hi Anton,
Quoted 4 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Anton Vorontsov <[email protected]>Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
As the patch adds some code to
arch/powerpc/, I believe Kumar would want to merge it into his powerpc tree. In that case I think we'll need your Acked-by line for formality.
Sure:
Quoted 1 line
But let's wait for Kumar's decision.
Signature · 1 line
Jean Delvare
Quoted 11 lines · Jean Delvare
Hi Anton,
Quoted 5 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
I'll pick this up.
- k
Quoted 11 lines · Jean Delvare
Hi Anton,
Quoted 5 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
I'll pick this up.
- k
Quoted 11 lines · Jean Delvare
Hi Anton,
Quoted 5 lines · Anton Vorontsov
This patch is used to help Jean Delvare to get rid of
drivers/i2c/chips/directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed intoarch/powerpc/platforms/83xx/.Signed-off-by Anton Vorontsov <[email protected]>Thanks for doing this. Do you expect me to take this patch in my i2c tree, or will it go in some powerpc tree?
I'll pick this up.
- k