mpc83xx: New board support for SIMPC8313
PATCH v5 1/1 mpc83xx: New board support for SIMPC8313
Quoted 39 lines · Ron Madrid
From: Ron Madrid <[email protected]>
Subject: Re: [U-Boot] [PATCH v5] mpc83xx: New board support for SIMPC8313
To: "Kim Phillips" <[email protected]>
Cc: u-boot at lists.denx.de
Date: Friday, January 23, 2009, 2:29 PM
--- On Fri, 1/23/09, Kim PhillipsQuoted 3 lines · <[email protected]> wrote:
Quoted 3 lines
Quoted 3 lines
Review
Quoted 3 lines
(quoted diff) +2
-0+ENTRY(_start) +ASSERT(_end <= 0xfff01000,"NAND
Quoted 4 lines
bootstrap
Quoted 3 lines
Quoted 3 lines
too big");
Ron, the above gets asserted when building
for
Quoted 5 lines
large page
Quoted 4 lines
Quoted 2 lines
nand with a
gcc 4.1.2 based toolchain:Please forgive my ignorance, but how can I go
about
Quoted 2 lines
fixing this? How do I
Quoted 1 line
determine my toolchain and how can I use the same
one
Quoted 2 lines
you are referring to?
Quoted 1 line
Are there any documents that can point me in the
right
Quoted 3 lines
direction?
I'm just using what Fedora brought to me on my G5
box
Quoted 2 lines
(native
compiler). I still use it because it's close towhat
Quoted 4 lines
the ELDK version
is (or used to be - I can't immediately tell which version the ELDK is
using right now). Where/when did you get your
Quoted 8 lines
toolchain?
I am using the one that came with FC4. I'm guessing that I should go ahead
an update my gcc. I'm in the middle of doing that. I'll get back to you
if I discover anything and then of course I'll resubmit.
I upgraded my gcc and did not see any difference in the builds. I'm not sure where to go from here.
Ron
PATCH v5 1/1 mpc83xx: New board support for SIMPC8313
Quoted 43 lines · On Fri, 23 Jan 2009 15:36:40 -0800 (PST) Ron Madrid <[email protected]>…
Quoted 41 lines · Ron Madrid
From: Ron Madrid <[email protected]>
Subject: Re: [U-Boot] [PATCH v5] mpc83xx: New board support for SIMPC8313
To: "Kim Phillips" <[email protected]>
Cc: u-boot at lists.denx.de
Date: Friday, January 23, 2009, 2:29 PM
--- On Fri, 1/23/09, Kim PhillipsQuoted 3 lines · <[email protected]> wrote:
Quoted 3 lines
Quoted 3 lines
Review
Quoted 3 lines
(quoted diff) +2
-0+ENTRY(_start) +ASSERT(_end <= 0xfff01000,"NAND
Quoted 4 lines
bootstrap
Quoted 3 lines
Quoted 3 lines
too big");
Ron, the above gets asserted when building
for
Quoted 5 lines
large page
Quoted 4 lines
Quoted 2 lines
nand with a
gcc 4.1.2 based toolchain:Please forgive my ignorance, but how can I go
about
Quoted 2 lines
fixing this? How do I
Quoted 1 line
determine my toolchain and how can I use the same
one
Quoted 2 lines
you are referring to?
Quoted 1 line
Are there any documents that can point me in the
right
Quoted 3 lines
direction?
I'm just using what Fedora brought to me on my G5
box
Quoted 2 lines
(native
compiler). I still use it because it's close towhat
Quoted 4 lines
the ELDK version
is (or used to be - I can't immediately tell which version the ELDK is
using right now). Where/when did you get yourtoolchain?
Quoted 8 lines
Quoted 6 lines
I am using the one that came with FC4. I'm guessing that I should go ahead
an update my gcc. I'm in the middle of doing that. I'll get back to you
if I discover anything and then of course I'll resubmit.I upgraded my gcc and did not see any difference in the builds. I'm not sure where to go from here.
me neither. I know it works with gcc 4.2, just not gcc 4.1, and I don't know what version the ELDK currently uses. I'll just take it since it's so early in the cycle, and WD seems to be overtaking me in 83xx patches anyway ;). I expect the issue to be fixed before the next release though.
Kim
PATCH v5 1/1 mpc83xx: New board support for SIMPC8313
Dear Kim Phillips,
Quoted 6 lines · In message <[email protected]> you wrote:
me neither. I know it works with gcc 4.2, just not gcc 4.1, and I don't know what version the ELDK currently uses. I'll just take it since it's so early in the cycle, and WD seems to be overtaking me in 83xx patches anyway ;). I expect the issue to be fixed before the next release though.
ELDK uses:
ELDK 4.0: gcc version 4.0.0
ELDK 4.1: gcc version 4.0.0
ELDK 4.2: gcc version 4.2.2
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I can't understand it. I can't even understand the people who can understand it. - Queen Juliana of the Netherlands.
PATCH v5 1/1 mpc83xx: New board support for SIMPC8313
Quoted 8 lines · On Sat, 24 Jan 2009 02:14:16 +0100 Wolfgang Denk <[email protected]> wrote:
Quoted 6 lines · In message <[email protected]> you wrote:
me neither. I know it works with gcc 4.2, just not gcc 4.1, and I don't know what version the ELDK currently uses. I'll just take it since it's so early in the cycle, and WD seems to be overtaking me in 83xx patches anyway ;). I expect the issue to be fixed before the next release though.
Quoted 5 lines
ELDK uses:
ELDK 4.0: gcc version 4.0.0
ELDK 4.1: gcc version 4.0.0
ELDK 4.2: gcc version 4.2.2
great, then all should be ok.
Thank you Wolfgang,
Kim