e1000e: workaround hw errata
Subsystems (2)
PATCH 1/1 e1000e: workaround hw errata
From: Jesse Brandeburg <[email protected]>
There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init.
If this bit is not set A0 versions of the 82574 can generate tx hangs.
Signed-off-by Jesse Brandeburg <[email protected]>
Signed-off-by Bruce Allan <[email protected]>
Signed-off-by Jeff Kirsher <[email protected]>
---
drivers/net/e1000e/82571.c | 6 +++++- drivers/net/e1000e/hw.h | 1 + 2 files changed, 6 insertions(+), 1 deletions(-)
drivers/net/e1000e/82571.c +5 -1
@@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)ew32 (PBA_ECC , reg); } -/* PCI-Ex Control Register */ +/* PCI-Ex Control Registers */ if (hw->mac.type == e1000_82574) { reg =er32 (GCR ); reg |= (1 <<22 );ew32 (GCR , reg); + + reg =er32 (GCR2 ); + reg |=1 ; +ew32 (GCR2 , reg); }return ;
drivers/net/e1000e/hw.h +1 -0
@@ -206,6 +206,7 @@ enum e1e_registers {E1000_MANC2H =0x05860 ,/* Management Control To Host - RW */ E1000_SW_FW_SYNC =0x05B5C ,/* Software-Firmware Synchronization - RW */ E1000_GCR =0x05B00 ,/* PCI-Ex Control */ +E1000_GCR2 =0x05B64 ,/* PCI-Ex Control #2 */ E1000_FACTPS =0x05B30 ,/* Function Active and Power State to MNG */ E1000_SWSM =0x05B50 ,/* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */
From: Jeff Kirsher <[email protected]>
Date: Fri, 23 Jan 2009 17:35:31 -0800
Quoted 9 lines
There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init.
If this bit is not set A0 versions of the 82574 can generate tx hangs.
Signed-off-by Jesse Brandeburg <[email protected]>Signed-off-by Bruce Allan <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied, thanks Jeff.