Skip to contentSkip to conversation

qemu-mips usage

U-Boot Luigi 'Comio' Mantellini 3 participants 4 messages Jan 26, 2009

lore
Share & tools
lore
#0 lore raw

Hi ML,

I'm evaluating the qemu-mips to simulate a mips 4kec/24kec board. I'm working on the high level booting sequence (linux init scripts), and qemu+uboot should be a good choice to emulate a basic system (flash + dram + 4kec cpu).

Furthermore, also following the doc/README.qemu_mips, I'm not able to see the u-boot prompt on my qemu because the flash is not recognized. I haven't experience with qemu-mips and I don't understand where the flash is placed (canonical 0xbfxxxx address?) and how it is managed. Reading the configs/qemu_mips.h, It seems that the flash is managed as a common CFI flash placed to 0xbfc00000 address... but u-boot shows always "Unknown FLASH on Bank 1" on startup.

Has anyone tried to use qemu-mips to boot a standard u-boot image (qemu_mips target on u-boot)?

Thanks for any suggestion.

luigi

########### Useful Infos ############

This is the qemu banner (on Ubuntu 8.10):

EMU PC emulator version 0.9.1, Copyright (c) 2003-2008 Fabrice Bellard

This is the execution log:

$ cp ../u-boot-vanilla/u-boot.bin mips_bios.bin
$ dd of=flash bs=1k count=4k if=/dev/zero
4096+0 records in
4096+0 records out
4194304 bytes (4,2 MB) copied, 0,046865 s, 89,5 MB/s
$ dd of=flash bs=1k conv=notrunc if=../u-boot-vanilla/u-boot.bin
163+1 records in
163+1 records out
167076 bytes (167 kB) copied, 0,00124954 s, 134 MB/s
$ qemu-system-mips -M mips -pflash flash -monitor null -nographic
qemu: Warning, could not load MIPS bios '/usr/share/qemu/mips_bios.bin'
Terminated
$ qemu-system-mips -L . -M mips -pflash flash -monitor null -nographic

U-Boot 2009.01-00080-g8f86a36 (gen 26 2009 - 09:23:04)

Board: Qemu -M mips CPU: 24Kf proc_id=0x19300
DRAM:  128 MB

## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB Terminated
$

Signature · 8 lines
Luigi Mantellini
R&D - Software
Industrie Dial Face S.p.A.
Via Canzo, 4
20068 Peschiera Borromeo (MI), Italy
Tel.:  +39 02 5167 2813
Fax:   +39 02 5167 2459
Email: luigi.mantellini at idf-hit.com
#1 lore raw

Hi,

Quoted 14 lines · Luigi 'Comio' Mantellini

Hi ML,

I'm evaluating the qemu-mips to simulate a mips 4kec/24kec board. I'm working on the high level booting sequence (linux init scripts), and qemu+uboot should be a good choice to emulate a basic system (flash + dram + 4kec cpu).

Furthermore, also following the doc/README.qemu_mips, I'm not able to see the u-boot prompt on my qemu because the flash is not recognized. I haven't experience with qemu-mips and I don't understand where the flash is placed (canonical 0xbfxxxx address?) and how it is managed. Reading the configs/qemu_mips.h, It seems that the flash is managed as a common CFI flash placed to 0xbfc00000 address... but u-boot shows always "Unknown FLASH on Bank 1" on startup.

Quoted 3 lines

Has anyone tried to use qemu-mips to boot a standard u-boot image (qemu_mips target on u-boot)?

Please check this thread.
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/42669

Best regards,
Nobuhiro

#2 lore raw
In reply to Luigi 'Comio' Mantellini
Quoted 20 lines · Luigi 'Comio' Mantellini

Hi ML,

I'm evaluating the qemu-mips to simulate a mips 4kec/24kec board. I'm working on the high level booting sequence (linux init scripts), and qemu+uboot should be a good choice to emulate a basic system (flash + dram + 4kec cpu).

Furthermore, also following the doc/README.qemu_mips, I'm not able to see the u-boot prompt on my qemu because the flash is not recognized. I haven't experience with qemu-mips and I don't understand where the flash is placed (canonical 0xbfxxxx address?) and how it is managed. Reading the configs/qemu_mips.h, It seems that the flash is managed as a common CFI flash placed to 0xbfc00000 address... but u-boot shows always "Unknown FLASH on Bank 1" on startup.

Has anyone tried to use qemu-mips to boot a standard u-boot image (qemu_mips target on u-boot)?

Thanks for any suggestion.

Quoted 7 lines

luigi

########### Useful Infos ############

This is the qemu banner (on Ubuntu 8.10):

EMU PC emulator version 0.9.1, Copyright (c) 2003-2008 Fabrice Bellard

Please use the SVN version of qemu for the current u-boot version

I'll update the README.qemu_mips to specify the last u-boot version for the old qemu

Best Regards,
J.

#3 lore raw

Dear All,

thanks for the help.
I used the last svn copy and it works fine:
URL: svn://svn.savannah.nongnu.org/qemu/trunk Repository Root: svn://svn.savannah.nongnu.org/qemu Repository UUID: c046a42c-6fe2-441c-8c8c-71466251a162
Revision: 6436

Anyway I created a trivial patch in order to permit to have an arbitrary flash size on mips board (I'm need to simulate a board with 32MB instead the usual 4M). Using the patch, the flash memory placed at the end of 0xbfxxxxxxxx memory space:

4MB flash: start bfc00000 -> end bfffffff
8MB flash: start bf800000 -> end bfffffff
16MB flash: start bf000000 -> end bfffffff
32MB flash: start be000000 -> end bfffffff

The firmware must be placed always at address 0xbfc00000. these are the relative address on the file:

4MB flash: firmware offset +0
8MB flash: firmware offset +4MB
16MB flash: firmware offset +12MB
32MB flash: firmware offset +28MB

To create the image files, use the following trivial script:

dd if=/dev/zero of=flash.img bs=$flashsize count=1 conv=sync dd if=u-boot.bi of=flash.img bs=1 seek=$biosbase conv=notrunc

Thanks again for your support.

luigi

Quoted 37 lines · On Monday 26 January 2009 13:53:07 Jean-Christophe PLAGNIOL-VILLARD wrote:
Quoted 21 lines · Luigi 'Comio' Mantellini

Hi ML,

I'm evaluating the qemu-mips to simulate a mips 4kec/24kec board. I'm working on the high level booting sequence (linux init scripts), and qemu+uboot should be a good choice to emulate a basic system (flash + dram + 4kec cpu).

Furthermore, also following the doc/README.qemu_mips, I'm not able to see the u-boot prompt on my qemu because the flash is not recognized. I haven't experience with qemu-mips and I don't understand where the flash is placed (canonical 0xbfxxxx address?) and how it is managed. Reading the configs/qemu_mips.h, It seems that the flash is managed as a common CFI flash placed to 0xbfc00000 address... but u-boot shows always "Unknown FLASH on Bank 1" on startup.

Has anyone tried to use qemu-mips to boot a standard u-boot image (qemu_mips target on u-boot)?

Thanks for any suggestion.

Quoted 7 lines

luigi

########### Useful Infos ############

This is the qemu banner (on Ubuntu 8.10):

EMU PC emulator version 0.9.1, Copyright (c) 2003-2008 Fabrice Bellard

Please use the SVN version of qemu for the current u-boot version

I'll update the README.qemu_mips to specify the last u-boot version for the old qemu

Best Regards,
J.

Signature · 16 lines
Luigi Mantellini
R&D - Software
Industrie Dial Face S.p.A.
Via Canzo, 4
20068 Peschiera Borromeo (MI), Italy
Tel.:  +39 02 5167 2813
Fax:   +39 02 5167 2459
Email: luigi.mantellini at idf-hit.com

-------------- next part --------------
A non-text attachment was scrubbed...
Name: mips_r4k_aribtrary_flash_size.patch
Type: text/x-patch
Size: 1318 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090126/1fe90f8f/attachment.bin