Skip to contentSkip to conversation

2.6.29-rc4-rt1

Announce In review Thomas Gleixner 57 participants 299 messages Feb 11, 2009 – Mar 1, 2010 Page 1 of 3

Subsystems (28)
lore
Share & tools
lore
#0 lore raw

After a 1.5 years sabbatical from preempt-rt we are pleased to announce a refactored preempt-rt patch against linux-2.6.29-rc4.

The patch is working on x86 (32 and 64bit) but we have not yet updated ARM, PPC and MIPS (work in progress).

We also dropped some experimental features of the base preempt-rt queue 2.6.26.8-rt15 simply because we wanted to survive the forward port over 3 kernel releases with the least amount of surprises. These features (e.g. multiple reader PI locks) are not essential for the preempt-rt functionality and need some serious overhaul anyway.

The interested -rt observer might have noticed that we based our work on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree which is based on 2.6.28. The reason for this is that we wanted to pick the most stable patch queue and the git-rt tree has a lot of rewritten new code. Our work is not making the work which was done over the last months in the git-rt tree obsolete, quite the contrary: we want to provide a stable yet latest-kernel based foundation and integrate those changes gradually, as they become ready.

The further plan for the new -rt series is to merge it fully into git and integrate it into the -tip git tree so it gets the same treatment as all of our -tip based work: fully automated compile and boot testing. Furthermore an automated multi architecture -rt performance regression test based on the same infrastructure is currently being built.

The integration into the -tip tree also allows us to seperate out parts of -rt which are ready for mainline more easily and integrate them with our usual propagation to mainline.

The structure of the patches is likely to change over the next days when we tackle the git integration, but we appreciate your feedback in the form of comments, bugreports and patches.

Enough said. You can find the new patches at the following location:

http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt1 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt1.bz2

The broken out patches are also available at the same download location.

Enjoy !

Thomas, Ingo

#1 lore raw
Quoted 28 lines · Thomas Gleixner

After a 1.5 years sabbatical from preempt-rt we are pleased to announce a refactored preempt-rt patch against linux-2.6.29-rc4.

The patch is working on x86 (32 and 64bit) but we have not yet updated ARM, PPC and MIPS (work in progress).

We also dropped some experimental features of the base preempt-rt queue 2.6.26.8-rt15 simply because we wanted to survive the forward port over 3 kernel releases with the least amount of surprises. These features (e.g. multiple reader PI locks) are not essential for the preempt-rt functionality and need some serious overhaul anyway.

The interested -rt observer might have noticed that we based our work on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree which is based on 2.6.28. The reason for this is that we wanted to pick the most stable patch queue and the git-rt tree has a lot of rewritten new code. Our work is not making the work which was done over the last months in the git-rt tree obsolete, quite the contrary: we want to provide a stable yet latest-kernel based foundation and integrate those changes gradually, as they become ready.

The further plan for the new -rt series is to merge it fully into git and integrate it into the -tip git tree so it gets the same treatment as all of our -tip based work: fully automated compile and boot testing. Furthermore an automated multi architecture -rt performance regression test based on the same infrastructure is currently being built.

Quoted 8 lines

The integration into the -tip tree also allows us to seperate out parts of -rt which are ready for mainline more easily and integrate them with our usual propagation to mainline.

The structure of the patches is likely to change over the next days when we tackle the git integration, but we appreciate your feedback in the form of comments, bugreports and patches.

Hi!

I get some sleep while atomic warnings.
I've put the log and my config in attachment.

ents+0xd0/0xe0
[   44.220800]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   44.220808]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   44.220815]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   44.220822]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   44.220829]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   44.220836]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220842]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   44.220850]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   44.220856]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220864]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   44.220870]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   44.220877]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   44.220883]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   44.220889]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   44.220896]  [<ffffffff802e0c36>] ? vma_adjust+0x106/0x520
[   44.220903]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   44.220909]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   44.220915]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   44.220922]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   44.220928]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220936]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   44.220942]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   44.220949]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   44.220955]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   44.220960]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
[   45.228738]  [<ffffffff8043e250>] clear_user+0x30/0x40
[   45.228746]  [<ffffffff80345d6c>] load_elf_binary+0x1cbc/0x1ef0
[   45.228752]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228758]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   45.228764]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   45.228770]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   45.228777]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   45.228784]  [<ffffffff803440b0>] ? load_elf_binary+0x0/0x1ef0
[   45.228790]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   45.228796]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   45.228803]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   45.228809]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   46.422994] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   46.423004] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   46.423008] INFO: lockdep is turned off.
[   46.423012] irq event stamp: 0
[   46.423015] hardirqs last  enabled at (0): [<(null)>] (null)
[   46.423021] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   46.423034] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   46.423041] softirqs last disabled at (0): [<(null)>] (null)
[   46.423049] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   46.423054] Call Trace:
[   46.423063]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   46.423070]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   46.423077]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   46.423084]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   46.423091]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   46.423098]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   46.423105]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423111]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   46.423119]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   46.423125]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423132]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   46.423140]  [<ffffffff802cc9c7>] ? activate_page+0x147/0x1e0
[   46.423146]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   46.423152]  [<ffffffff802cc9c7>] ? activate_page+0x147/0x1e0
[   46.423159]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   46.423165]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   46.423171]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   46.423178]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   46.423184]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   46.423190]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   46.423197]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   46.423203]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423211]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   46.423218]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   46.423224]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   46.423230]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   46.423236]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   47.420101] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   47.420111] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   47.420116] INFO: lockdep is turned off.
[   47.420120] irq event stamp: 0
[   47.420123] hardirqs last  enabled at (0): [<(null)>] (null)
[   47.420130] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   47.420143] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   47.420151] softirqs last disabled at (0): [<(null)>] (null)
[   47.420158] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   47.420163] Call Trace:
[   47.420173]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   47.420180]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   47.420188]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   47.420194]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   47.420202]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   47.420208]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   47.420217]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   47.420222]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   47.420230]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   47.420237]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   47.420244]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   47.420250]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   49.011076] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   49.011085] in_atomic(): 0, irqs_disabled(): 1, pid: 4303, name: aplay
[   49.011090] INFO: lockdep is turned off.
[   49.011093] irq event stamp: 0
[   49.011097] hardirqs last  enabled at (0): [<(null)>] (null)
[   49.011103] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   49.011115] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   49.011122] softirqs last disabled at (0): [<(null)>] (null)
[   49.011130] Pid: 4303, comm: aplay Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   49.011135] Call Trace:
[   49.011143]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   49.011150]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   49.011157]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   49.011165]  [<ffffffff80296985>] res_counter_uncharge+0x45/0xa0
[   49.011172]  [<ffffffff802fc108>] __mem_cgroup_uncharge_common+0xa8/0x140
[   49.011179]  [<ffffffff802fc1f0>] mem_cgroup_uncharge_cache_page+0x10/0x20
[   49.011186]  [<ffffffff802c35d1>] __remove_from_page_cache+0x51/0x100
[   49.011192]  [<ffffffff802c36ac>] remove_from_page_cache+0x2c/0x40
[   49.011199]  [<ffffffff802cd378>] truncate_complete_page+0x48/0x80
[   49.011206]  [<ffffffff802cd50f>] truncate_inode_pages_range+0x15f/0x410
[   49.011213]  [<ffffffff802cd7d5>] truncate_inode_pages+0x15/0x20
[   49.011219]  [<ffffffff802d2795>] shmem_delete_inode+0x65/0xf0
[   49.011225]  [<ffffffff802d2730>] ? shmem_delete_inode+0x0/0xf0
[   49.011232]  [<ffffffff80315c4c>] generic_delete_inode+0x8c/0x120
[   49.011239]  [<ffffffff80314b72>] iput+0x62/0x70
[   49.011245]  [<ffffffff803112d0>] dentry_iput+0xa0/0xf0
[   49.011251]  [<ffffffff8031144b>] d_kill+0x5b/0x90
[   49.011257]  [<ffffffff8031393e>] dput+0xbe/0x1d0
[   49.011263]  [<ffffffff80300795>] __fput+0x165/0x1f0
[   49.011269]  [<ffffffff80300845>] fput+0x25/0x30
[   49.011275]  [<ffffffff803c35b1>] shm_destroy+0xa1/0xc0
[   49.011281]  [<ffffffff803c37d8>] do_shm_rmid+0x18/0x50
[   49.011286]  [<ffffffff803c41d2>] sys_shmctl+0x512/0x760
[   49.011294]  [<ffffffff8021245a>] ? sysret_check+0x2e/0x69
[   49.011300]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   49.011307]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   49.011313]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   50.039040] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   50.039049] in_atomic(): 0, irqs_disabled(): 1, pid: 3552, name: syslogd
[   50.039053] INFO: lockdep is turned off.
[   50.039057] irq event stamp: 0
[   50.039060] hardirqs last  enabled at (0): [<(null)>] (null)
[   50.039066] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   50.039078] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   50.039086] softirqs last disabled at (0): [<(null)>] (null)
[   50.039093] Pid: 3552, comm: syslogd Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   50.039098] Call Trace:
[   50.039107]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   50.039114]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   50.039121]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   50.039128]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   50.039136]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   50.039143]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   50.039151]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039157]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   50.039164]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   50.039170]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   50.039176]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   50.039182]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039190]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   50.039197]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039203]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   50.039210]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   50.039217]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   50.039224]  [<ffffffff802c34b0>] ? generic_file_aio_write+0x0/0xd0
[   50.039230]  [<ffffffff802feeb3>] do_sync_readv_writev+0xf3/0x140
[   50.039236]  [<ffffffff802f5da6>] ? __cache_free+0x16/0x280
[   50.039243]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   50.039252]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   50.039259]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   50.039265]  [<ffffffff802ff704>] do_readv_writev+0xd4/0x200
[   50.039271]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039277]  [<ffffffff802ff878>] vfs_writev+0x48/0x70
[   50.039283]  [<ffffffff802ff8f5>] sys_writev+0x55/0xc0
[   50.039289]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   54.841672] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   54.842049] in_atomic(): 0, irqs_disabled(): 1, pid: 4238, name: nm-dispatcher.a
[   54.842404] INFO: lockdep is turned off.
[   54.842408] irq event stamp: 0
[   54.842412] hardirqs last  enabled at (0): [<(null)>] (null)
[   54.842418] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   54.842430] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   54.842438] softirqs last disabled at (0): [<(null)>] (null)
[   54.842446] Pid: 4238, comm: nm-dispatcher.a Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   54.842451] Call Trace:
[   54.842460]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   54.842467]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   54.842474]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   54.842481]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   54.842488]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   54.842494]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   54.842502]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   54.842508]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   54.842516]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   54.842522]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   54.842529]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   54.842535]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   57.756764] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   57.756773] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   57.756778] INFO: lockdep is turned off.
[   57.756781] irq event stamp: 0
[   57.756785] hardirqs last  enabled at (0): [<(null)>] (null)
[   57.756791] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   57.756803] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   57.756810] softirqs last disabled at (0): [<(null)>] (null)
[   57.756818] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   57.756823] Call Trace:
[   57.756831]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   57.756838]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   57.756846]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   57.756852]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   57.756860]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   57.756866]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   57.756874]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756880]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   57.756888]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   57.756894]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756901]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   57.756907]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   57.756914]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   57.756920]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   57.756926]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   57.756933]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   57.756939]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   57.756945]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   57.756952]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   57.756959]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756967]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   57.756973]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   57.756979]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   57.756985]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   57.756991]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   59.167886] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   59.167896] in_atomic(): 0, irqs_disabled(): 1, pid: 4067, name: gdm
[   59.167900] INFO: lockdep is turned off.
[   59.167904] irq event stamp: 0
[   59.167907] hardirqs last  enabled at (0): [<(null)>] (null)
[   59.167913] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   59.167925] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   59.167932] softirqs last disabled at (0): [<(null)>] (null)
[   59.167939] Pid: 4067, comm: gdm Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   59.167944] Call Trace:
[   59.167953]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   59.167960]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   59.167967]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   59.167974]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   59.167982]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   59.167988]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   59.167995]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   59.168001]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   59.168008]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   59.168014]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   59.168022]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   59.168028]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   59.168036]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   59.168043]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   59.168049]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   59.168056]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   59.168063]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   59.168069]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   59.168075]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   59.168082]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   59.168087]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   59.168095]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   59.168101]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   59.168107]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   59.168115]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   59.168121]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   59.168128]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   59.168134]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   59.168140]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   60.264296] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   60.264305] in_atomic(): 0, irqs_disabled(): 1, pid: 432, name: pdflush
[   60.264309] INFO: lockdep is turned off.
[   60.264313] irq event stamp: 0
[   60.264316] hardirqs last  enabled at (0): [<(null)>] (null)
[   60.264322] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   60.264334] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   60.264341] softirqs last disabled at (0): [<(null)>] (null)
[   60.264348] Pid: 432, comm: pdflush Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   60.264353] Call Trace:
[   60.264362]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   60.264369]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   60.264376]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   60.264383]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   60.264390]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   60.264397]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   60.264404]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   60.264410]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   60.264417]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   60.264423]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   60.264429]  [<ffffffff802c1eb9>] find_or_create_page+0x69/0xb0
[   60.264436]  [<ffffffff80325771>] __getblk+0x111/0x350
[   60.264443]  [<ffffffff803858af>] do_journal_end+0x54f/0x1110
[   60.264449]  [<ffffffff8077cbeb>] ? _mutex_unlock+0x2b/0x40
[   60.264455]  [<ffffffff80386934>] ? do_journal_begin_r+0x164/0x340
[   60.264461]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   60.264467]  [<ffffffff803864e3>] journal_end_sync+0x73/0x90
[   60.264473]  [<ffffffff803758f0>] reiserfs_sync_fs+0x70/0x90
[   60.264479]  [<ffffffff80375923>] reiserfs_write_super+0x13/0x20
[   60.264486]  [<ffffffff80301284>] sync_supers+0x94/0xf0
[   60.264492]  [<ffffffff802ca367>] wb_kupdate+0x37/0x130
[   60.264498]  [<ffffffff802cb2b1>] pdflush+0x161/0x240
[   60.264504]  [<ffffffff802ca330>] ? wb_kupdate+0x0/0x130
[   60.264510]  [<ffffffff802810ad>] ? trace_hardirqs_on+0xd/0x10
[   60.264516]  [<ffffffff802cb150>] ? pdflush+0x0/0x240
[   60.264522]  [<ffffffff8026f0ee>] kthread+0x4e/0x90
[   60.264528]  [<ffffffff802135ba>] child_rip+0xa/0x20
[   60.264534]  [<ffffffff80250125>] ? schedule_tail+0x45/0xb0
[   60.264539]  [<ffffffff802810ad>] ? trace_hardirqs_on+0xd/0x10
[   60.264545]  [<ffffffff80212f54>] ? restore_args+0x0/0x30
[   60.264551]  [<ffffffff8026f0a0>] ? kthread+0x0/0x90
[   60.264556]  [<ffffffff802135b0>] ? child_rip+0x0/0x20
[   61.274005] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   61.274013] in_atomic(): 0, irqs_disabled(): 1, pid: 4384, name: cc1
[   61.274018] INFO: lockdep is turned off.
[   61.274021] irq event stamp: 0
[   61.274024] hardirqs last  enabled at (0): [<(null)>] (null)
[   61.274030] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   61.274042] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   61.274050] softirqs last disabled at (0): [<(null)>] (null)
[   61.274057] Pid: 4384, comm: cc1 Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   61.274062] Call Trace:
[   61.274071]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   61.274078]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   61.274085]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   61.274092]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   61.274100]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   61.274106]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   61.274113]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   61.274119]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   61.274126]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   61.274132]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   61.274140]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   61.274146]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   61.274154]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   61.274161]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   61.274167]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   61.274174]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   61.274181]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   61.274187]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   61.274194]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   61.274200]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   61.274206]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   61.274213]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   61.274219]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   62.285531] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   62.285540] in_atomic(): 0, irqs_disabled(): 1, pid: 4408, name: dbus-daemon
[   62.285545] INFO: lockdep is turned off.
[   62.285549] irq event stamp: 0
[   62.285552] hardirqs last  enabled at (0): [<(null)>] (null)
[   62.285558] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   62.285570] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   62.285578] softirqs last disabled at (0): [<(null)>] (null)
[   62.285585] Pid: 4408, comm: dbus-daemon Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   62.285589] Call Trace:
[   62.285599]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   62.285605]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   62.285613]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   62.285620]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   62.285627]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   62.285633]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   62.285641]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285647]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   62.285654]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   62.285660]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   62.285667]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   62.285674]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   62.285681]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   62.285689]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   62.285695]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   62.285702]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   62.285708]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   62.285715]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   62.285721]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   62.285728]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   62.285733]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   62.285739]  [<ffffffff8077b9c9>] ? rt_mutex_unlock+0x9/0x40
[   62.285746]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   62.285753]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285758]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285766]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   62.285772]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   62.285779]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   62.285785]  [<ffffffff8030550f>] kernel_read+0x3f/0x60
[   62.285790]  [<ffffffff80305615>] prepare_binprm+0xe5/0x110
[   62.285796]  [<ffffffff80305e25>] do_execve+0x1a5/0x2a0
[   62.285802]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   62.285808]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   63.288944] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   63.288953] in_atomic(): 0, irqs_disabled(): 1, pid: 4413, name: gvfsd
[   63.288958] INFO: lockdep is turned off.
[   63.288961] irq event stamp: 0
[   63.288965] hardirqs last  enabled at (0): [<(null)>] (null)
[   63.288971] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   63.288982] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   63.288990] softirqs last disabled at (0): [<(null)>] (null)
[   63.288997] Pid: 4413, comm: gvfsd Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   63.289002] Call Trace:
[   63.289010]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   63.289017]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   63.289025]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   63.289031]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   63.289039]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   63.289045]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   63.289053]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   63.289059]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   63.289065]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   63.289071]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   63.289079]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   63.289085]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   63.289093]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   63.289100]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   63.289106]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   63.289113]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   63.289120]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   63.289126]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   63.289132]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   63.289138]  [<ffffffff802fcc60>] ? generic_file_open+0x0/0x40
[   63.289144]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   63.289150]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   63.289157]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   63.289163]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   63.289171]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   63.289177]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   63.289184]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   63.289189]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   63.289195]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   64.339383] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   64.339392] in_atomic(): 0, irqs_disabled(): 1, pid: 4411, name: xfce-mcs-manage
[   64.339397] INFO: lockdep is turned off.
[   64.339401] irq event stamp: 0
[   64.339404] hardirqs last  enabled at (0): [<(null)>] (null)
[   64.339409] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   64.339421] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   64.339428] softirqs last disabled at (0): [<(null)>] (null)
[   64.339435] Pid: 4411, comm: xfce-mcs-manage Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   64.339440] Call Trace:
[   64.339449]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   64.339456]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   64.339463]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   64.339470]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   64.339477]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   64.339484]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   64.339491]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   64.339497]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   64.339504]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   64.339510]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   64.339517]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   64.339524]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   64.339531]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   64.339539]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   64.339545]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   64.339551]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   64.339558]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   64.339564]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   64.339571]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   64.339577]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   64.339583]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   64.339590]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   64.339596]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   65.336753] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   65.336762] in_atomic(): 0, irqs_disabled(): 1, pid: 4424, name: gam_server
[   65.336767] INFO: lockdep is turned off.
[   65.336770] irq event stamp: 0
[   65.336773] hardirqs last  enabled at (0): [<(null)>] (null)
[   65.336779] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   65.336791] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   65.336799] softirqs last disabled at (0): [<(null)>] (null)
[   65.336806] Pid: 4424, comm: gam_server Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   65.336811] Call Trace:
[   65.336821]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   65.336827]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   65.336834]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   65.336841]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   65.336848]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   65.336854]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   65.336862]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   65.336868]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   65.336876]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   65.336881]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   65.336888]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   65.336894]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   65.336901]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   65.336907]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   65.336914]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   65.336919]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
[   65.336924]  [<ffffffff8043e250>] clear_user+0x30/0x40
[   65.336932]  [<ffffffff80345d6c>] load_elf_binary+0x1cbc/0x1ef0
[   65.336938]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   65.336944]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   65.336950]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   65.336956]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   65.336962]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   65.336969]  [<ffffffff803440b0>] ? load_elf_binary+0x0/0x1ef0
[   65.336976]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   65.336981]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   65.336988]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   65.336994]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   66.374844] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   66.374853] in_atomic(): 0, irqs_disabled(): 1, pid: 4425, name: xfdesktop
[   66.374858] INFO: lockdep is turned off.
[   66.374862] irq event stamp: 0
[   66.374865] hardirqs last  enabled at (0): [<(null)>] (null)
[   66.374871] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   66.374883] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   66.374891] softirqs last disabled at (0): [<(null)>] (null)
[   66.374898] Pid: 4425, comm: xfdesktop Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   66.374903] Call Trace:
[   66.374912]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   66.374918]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   66.374926]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   66.374933]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   66.374940]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   66.374946]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   66.374954]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.374960]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   66.374967]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   66.374973]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   66.374980]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   66.374987]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   66.374994]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   66.375002]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   66.375008]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   66.375015]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   66.375021]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   66.375027]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   66.375034]  [<ffffffff804383f7>] ? prio_tree_insert+0x247/0x2d0
[   66.375042]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   66.375047]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.375054]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   66.375060]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.375067]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   66.375073]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   67.374088] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   67.374097] in_atomic(): 0, irqs_disabled(): 1, pid: 4425, name: xfdesktop
[   67.374102] INFO: lockdep is turned off.
[   67.374105] irq event stamp: 0
[   67.374108] hardirqs last  enabled at (0): [<(null)>] (null)
[   67.374114] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   67.374126] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   67.374133] softirqs last disabled at (0): [<(null)>] (null)
[   67.374140] Pid: 4425, comm: xfdesktop Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   67.374145] Call Trace:
[   67.374154]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   67.374161]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   67.374168]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   67.374175]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   67.374182]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   67.374188]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   67.374196]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374201]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   67.374209]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   67.374215]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374222]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   67.374228]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   67.374234]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   67.374240]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   67.374246]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   67.374253]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   67.374259]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   67.374265]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   67.374272]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   67.374278]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374286]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   67.374292]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   67.374298]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   67.374304]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   67.374310]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   68.378367] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   68.378376] in_atomic(): 0, irqs_disabled(): 1, pid: 4438, name: xfce4-panel
[   68.378381] INFO: lockdep is turned off.
[   68.378385] irq event stamp: 0
[   68.378388] hardirqs last  enabled at (0): [<(null)>] (null)
[   68.378394] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   68.378406] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   68.378413] softirqs last disabled at (0): [<(null)>] (null)
[   68.378420] Pid: 4438, comm: xfce4-panel Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   68.378425] Call Trace:
[   68.378434]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   68.378440]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   68.378448]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   68.378454]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   68.378462]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   68.378468]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   68.378475]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   68.378481]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   68.378488]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   68.378494]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   68.378502]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   68.378508]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   68.378516]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   68.378523]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   68.378529]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   68.378536]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   68.378543]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   68.378549]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   68.378555]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   68.378562]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   68.378568]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   68.378574]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   68.378581]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   68.378587]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   68.378595]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   68.378602]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   68.378608]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   68.378614]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   68.378619]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   69.377249] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   69.377258] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   69.377263] INFO: lockdep is turned off.
[   69.377267] irq event stamp: 0
[   69.377270] hardirqs last  enabled at (0): [<(null)>] (null)
[   69.377276] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   69.377288] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   69.377296] softirqs last disabled at (0): [<(null)>] (null)
[   69.377303] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   69.377308] Call Trace:
[   69.377317]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   69.377324]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   69.377331]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   69.377338]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   69.377345]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   69.377352]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   69.377359]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   69.377365]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   69.377372]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   69.377378]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   69.377385]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   69.377392]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   69.377399]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   69.377407]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   69.377413]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   69.377420]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   69.377426]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   69.377432]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   69.377439]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   69.377445]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   69.377452]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   69.377458]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   69.377465]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   70.376254] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   70.376263] in_atomic(): 0, irqs_disabled(): 1, pid: 4445, name: xfce4-places-pl
[   70.376268] INFO: lockdep is turned off.
[   70.376272] irq event stamp: 0
[   70.376275] hardirqs last  enabled at (0): [<(null)>] (null)
[   70.376281] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   70.376293] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   70.376300] softirqs last disabled at (0): [<(null)>] (null)
[   70.376307] Pid: 4445, comm: xfce4-places-pl Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   70.376312] Call Trace:
[   70.376321]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   70.376328]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   70.376335]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   70.376342]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   70.376349]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   70.376356]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   70.376364]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   70.376369]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   70.376377]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   70.376383]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   70.376390]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   70.376396]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   71.386946] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   71.386955] in_atomic(): 0, irqs_disabled(): 1, pid: 4499, name: python
[   71.386960] INFO: lockdep is turned off.
[   71.386965] irq event stamp: 0
[   71.386968] hardirqs last  enabled at (0): [<(null)>] (null)
[   71.386975] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   71.386987] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   71.386995] softirqs last disabled at (0): [<(null)>] (null)
[   71.387003] Pid: 4499, comm: python Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   71.387008] Call Trace:
[   71.387017]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   71.387024]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   71.387031]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   71.387038]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   71.387045]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   71.387051]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   71.387058]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   71.387064]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   71.387072]  [<ffffffff802d9d03>] do_wp_page+0x323/0x6e0
[   71.387078]  [<ffffffff802dbca6>] handle_mm_fault+0x5f6/0x890
[   71.387084]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   71.387091]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   71.387097]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   72.402564] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   72.402572] in_atomic(): 0, irqs_disabled(): 1, pid: 4503, name: nm-applet
[   72.402577] INFO: lockdep is turned off.
[   72.402581] irq event stamp: 0
[   72.402584] hardirqs last  enabled at (0): [<(null)>] (null)
[   72.402590] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   72.402602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   72.402609] softirqs last disabled at (0): [<(null)>] (null)
[   72.402616] Pid: 4503, comm: nm-applet Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   72.402621] Call Trace:
[   72.402630]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   72.402637]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   72.402645]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   72.402651]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   72.402659]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   72.402665]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   72.402672]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   72.402678]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   72.402686]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   72.402692]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   72.402699]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   72.402705]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   73.400318] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   73.400327] in_atomic(): 0, irqs_disabled(): 1, pid: 4510, name: xfce4-terminal
[   73.400332] INFO: lockdep is turned off.
[   73.400335] irq event stamp: 0
[   73.400338] hardirqs last  enabled at (0): [<(null)>] (null)
[   73.400344] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   73.400357] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   73.400365] softirqs last disabled at (0): [<(null)>] (null)
[   73.400372] Pid: 4510, comm: xfce4-terminal Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   73.400377] Call Trace:
[   73.400387]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   73.400393]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   73.400401]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   73.400408]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   73.400416]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   73.400422]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   73.400430]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   73.400436]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   73.400443]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   73.400450]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   73.400457]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   73.400463]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   74.400744] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   74.400753] in_atomic(): 0, irqs_disabled(): 1, pid: 4499, name: python
[   74.400758] INFO: lockdep is turned off.
[   74.400762] irq event stamp: 0
[   74.400765] hardirqs last  enabled at (0): [<(null)>] (null)
[   74.400771] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   74.400783] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   74.400790] softirqs last disabled at (0): [<(null)>] (null)
[   74.400797] Pid: 4499, comm: python Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   74.400802] Call Trace:
[   74.400811]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   74.400818]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   74.400825]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   74.400832]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   74.400839]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   74.400846]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   74.400853]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   74.400859]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   74.400866]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   74.400872]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   74.400878]  [<ffffffff802c1eb9>] find_or_create_page+0x69/0xb0
[   74.400884]  [<ffffffff80325771>] __getblk+0x111/0x350
[   74.400892]  [<ffffffff8037e1e9>] search_by_key+0x89/0xf70
[   74.400898]  [<ffffffff802f7da5>] ? cache_alloc_refill+0x95/0x2b0
[   74.400905]  [<ffffffff80445048>] ? __raw_spin_lock_init+0x38/0x70
[   74.400913]  [<ffffffff8036c43e>] reiserfs_read_locked_inode+0x7e/0x5f0
[   74.400920]  [<ffffffff8036a8d0>] ? reiserfs_init_locked_inode+0x0/0x20
[   74.400927]  [<ffffffff8036ca5d>] reiserfs_iget+0xad/0xd0
[   74.400932]  [<ffffffff8037e0d0>] ? pathrelse+0x40/0x60
[   74.400938]  [<ffffffff80368c25>] reiserfs_lookup+0x105/0x180
[   74.400944]  [<ffffffff8077c803>] ? rt_spin_lock+0x93/0xb0
[   74.400951]  [<ffffffff803085c6>] do_lookup+0x206/0x260
[   74.400957]  [<ffffffff8030a8fb>] __link_path_walk+0x78b/0x1030
[   74.400963]  [<ffffffff8030b3ee>] path_walk+0x6e/0xe0
[   74.400969]  [<ffffffff8030b5d6>] do_path_lookup+0xb6/0x230
[   74.400974]  [<ffffffff8030a106>] ? getname+0x1c6/0x230
[   74.400980]  [<ffffffff8030c50b>] user_path_at+0x7b/0xb0
[   74.400986]  [<ffffffff803031e8>] ? cp_new_stat+0xe8/0x100
[   74.400992]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   74.400998]  [<ffffffff8030360d>] vfs_stat_fd+0x2d/0x60
[   74.401004]  [<ffffffff803036ec>] sys_newstat+0x2c/0x50
[   74.401010]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   74.401016]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   74.401022]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   75.400153] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   75.400162] in_atomic(): 0, irqs_disabled(): 1, pid: 4514, name: geany
[   75.400167] INFO: lockdep is turned off.
[   75.400171] irq event stamp: 0
[   75.400174] hardirqs last  enabled at (0): [<(null)>] (null)
[   75.400180] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   75.400192] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   75.400199] softirqs last disabled at (0): [<(null)>] (null)
[   75.400206] Pid: 4514, comm: geany Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   75.400211] Call Trace:
[   75.400221]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   75.400227]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   75.400235]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   75.400241]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   75.400249]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   75.400255]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   75.400263]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   75.400269]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   75.400276]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   75.400282]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   75.400289]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   75.400295]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   76.402822] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   76.402831] in_atomic(): 0, irqs_disabled(): 1, pid: 4589, name: bash
[   76.402835] INFO: lockdep is turned off.
[   76.402839] irq event stamp: 0
[   76.402842] hardirqs last  enabled at (0): [<(null)>] (null)
[   76.402848] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   76.402861] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   76.402868] softirqs last disabled at (0): [<(null)>] (null)
[   76.402876] Pid: 4589, comm: bash Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   76.402880] Call Trace:
[   76.402890]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   76.402896]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   76.402904]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   76.402910]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   76.402917]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   76.402924]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   76.402932]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   76.402938]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   76.402945]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   76.402951]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   76.402958]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   76.402964]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   77.405166] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   77.405176] in_atomic(): 0, irqs_disabled(): 1, pid: 4514, name: geany
[   77.405180] INFO: lockdep is turned off.
[   77.405184] irq event stamp: 0
[   77.405187] hardirqs last  enabled at (0): [<(null)>] (null)
[   77.405193] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   77.405205] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   77.405212] softirqs last disabled at (0): [<(null)>] (null)
[   77.405219] Pid: 4514, comm: geany Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   77.405224] Call Trace:
[   77.405233]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   77.405240]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   77.405247]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   77.405253]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   77.405261]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   77.405267]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   77.405274]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405280]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   77.405287]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   77.405294]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405300]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   77.405306]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   77.405313]  [<ffffffff802c0a8b>] ? file_read_actor+0x6b/0x190
[   77.405319]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   77.405325]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   77.405332]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   77.405338]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   77.405345]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   77.405351]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405358]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   77.405365]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   77.405371]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   77.405376]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   77.405382]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   78.405258] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   78.405267] in_atomic(): 0, irqs_disabled(): 1, pid: 4583, name: bash
[   78.405271] INFO: lockdep is turned off.
[   78.405275] irq event stamp: 0
[   78.405278] hardirqs last  enabled at (0): [<(null)>] (null)
[   78.405284] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   78.405296] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   78.405304] softirqs last disabled at (0): [<(null)>] (null)
[   78.405311] Pid: 4583, comm: bash Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   78.405316] Call Trace:
[   78.405325]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   78.405331]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   78.405339]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   78.405345]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   78.405353]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   78.405359]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   78.405366]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   78.405372]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   78.405380]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   78.405386]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   78.405393]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   78.405399]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   79.415146] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   79.415155] in_atomic(): 0, irqs_disabled(): 1, pid: 4650, name: apt-cache
[   79.415160] INFO: lockdep is turned off.
[   79.415163] irq event stamp: 0
[   79.415167] hardirqs last  enabled at (0): [<(null)>] (null)
[   79.415173] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   79.415185] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   79.415193] softirqs last disabled at (0): [<(null)>] (null)
[   79.415200] Pid: 4650, comm: apt-cache Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   79.415204] Call Trace:
[   79.415216]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   79.415223]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   79.415230]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   79.415237]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   79.415244]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   79.415251]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   79.415258]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   79.415264]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   79.415271]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   79.415277]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   79.415285]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   79.415292]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   79.415300]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   79.415308]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   79.415314]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   79.415321]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   79.415328]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   79.415334]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   79.415341]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   79.415347]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   79.415353]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   79.415361]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   79.415367]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   80.415481] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   80.415489] in_atomic(): 0, irqs_disabled(): 1, pid: 4650, name: apt-cache
[   80.415494] INFO: lockdep is turned off.
[   80.415498] irq event stamp: 0
[   80.415501] hardirqs last  enabled at (0): [<(null)>] (null)
[   80.415507] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   80.415519] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   80.415526] softirqs last disabled at (0): [<(null)>] (null)
[   80.415533] Pid: 4650, comm: apt-cache Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   80.415538] Call Trace:
[   80.415547]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   80.415554]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   80.415562]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   80.415568]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   80.415575]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   80.415582]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   80.415589]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   80.415595]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   80.415602]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   80.415608]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   80.415615]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   80.415622]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   80.415629]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   80.415636]  [<ffffffff802a813d>] ? __rcu_read_unlock+0xad/0xe0
[   80.415642]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   80.415649]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   80.415656]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   80.415662]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   80.415669]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   80.415675]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   80.415682]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   80.415688]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   80.415694]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   80.415701]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   80.415707]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   81.413509] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   81.413518] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   81.413523] INFO: lockdep is turned off.
[   81.413527] irq event stamp: 0
[   81.413530] hardirqs last  enabled at (0): [<(null)>] (null)
[   81.413536] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   81.413548] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   81.413556] softirqs last disabled at (0): [<(null)>] (null)
[   81.413563] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   81.413567] Call Trace:
[   81.413577]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   81.413584]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   81.413591]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   81.413597]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   81.413605]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   81.413611]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   81.413618]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   81.413624]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   81.413632]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   81.413638]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   81.413645]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   81.413651]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   82.418681] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   82.418689] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   82.418694] INFO: lockdep is turned off.
[   82.418698] irq event stamp: 0
[   82.418701] hardirqs last  enabled at (0): [<(null)>] (null)
[   82.418707] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   82.418719] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   82.418726] softirqs last disabled at (0): [<(null)>] (null)
[   82.418733] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   82.418738] Call Trace:
[   82.418747]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   82.418754]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   82.418761]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   82.418768]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   82.418775]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   82.418781]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   82.418788]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   82.418794]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   82.418802]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   82.418808]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   82.418815]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   82.418821]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   83.416791] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   83.416799] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   83.416804] INFO: lockdep is turned off.
[   83.416808] irq event stamp: 0
[   83.416811] hardirqs last  enabled at (0): [<(null)>] (null)
[   83.416817] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   83.416829] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   83.416836] softirqs last disabled at (0): [<(null)>] (null)
[   83.416843] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   83.416848] Call Trace:
[   83.416857]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   83.416864]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   83.416871]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   83.416878]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   83.416886]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   83.416892]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   83.416900]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   83.416906]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   83.416913]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   83.416919]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   83.416926]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   83.416932]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   84.435979] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   84.435988] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   84.435993] INFO: lockdep is turned off.
[   84.435997] irq event stamp: 0
[   84.436000] hardirqs last  enabled at (0): [<(null)>] (null)
[   84.436006] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   84.436019] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   84.436027] softirqs last disabled at (0): [<(null)>] (null)
[   84.436034] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   84.436039] Call Trace:
[   84.436049]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   84.436055]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   84.436064]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   84.436071]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   84.436079]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   84.436085]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   84.436093]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   84.436099]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   84.436106]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   84.436112]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   84.436120]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   84.436126]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   85.432123] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   85.432132] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   85.432137] INFO: lockdep is turned off.
[   85.432141] irq event stamp: 0
[   85.432144] hardirqs last  enabled at (0): [<(null)>] (null)
[   85.432150] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   85.432162] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   85.432170] softirqs last disabled at (0): [<(null)>] (null)
[   85.432177] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   85.432182] Call Trace:
[   85.432191]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   85.432198]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   85.432205]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   85.432212]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   85.432219]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   85.432226]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   85.432233]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   85.432239]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   85.432247]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   85.432253]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   85.432260]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   85.432266]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   86.454653] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   86.454662] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   86.454667] INFO: lockdep is turned off.
[   86.454671] irq event stamp: 0
[   86.454674] hardirqs last  enabled at (0): [<(null)>] (null)
[   86.454680] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   86.454692] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   86.454699] softirqs last disabled at (0): [<(null)>] (null)
[   86.454706] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   86.454711] Call Trace:
[   86.454720]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   86.454727]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   86.454734]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   86.454741]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   86.454748]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   86.454755]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   86.454762]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   86.454768]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   86.454775]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   86.454781]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   86.454789]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   86.454795]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   87.453221] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   87.453230] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   87.453235] INFO: lockdep is turned off.
[   87.453239] irq event stamp: 0
[   87.453242] hardirqs last  enabled at (0): [<(null)>] (null)
[   87.453248] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   87.453260] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   87.453267] softirqs last disabled at (0): [<(null)>] (null)
[   87.453274] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   87.453279] Call Trace:
[   87.453288]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   87.453295]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   87.453302]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   87.453308]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   87.453316]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   87.453322]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   87.453330]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   87.453336]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   87.453343]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   87.453349]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   87.453356]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   87.453362]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   88.478497] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   88.478507] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   88.478512] INFO: lockdep is turned off.
[   88.478515] irq event stamp: 0
[   88.478518] hardirqs last  enabled at (0): [<(null)>] (null)
[   88.478524] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   88.478537] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   88.478544] softirqs last disabled at (0): [<(null)>] (null)
[   88.478551] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   88.478556] Call Trace:
[   88.478566]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   88.478572]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   88.478580]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   88.478587]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   88.478594]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   88.478600]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   88.478608]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   88.478614]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   88.478621]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   88.478627]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   88.478634]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   88.478640]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   89.484892] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   89.484900] in_atomic(): 0, irqs_disabled(): 1, pid: 4674, name: linux32
[   89.484905] INFO: lockdep is turned off.
[   89.484909] irq event stamp: 0
[   89.484912] hardirqs last  enabled at (0): [<(null)>] (null)
[   89.484918] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   89.484930] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   89.484937] softirqs last disabled at (0): [<(null)>] (null)
[   89.484944] Pid: 4674, comm: linux32 Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   89.484949] Call Trace:
[   89.484958]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   89.484965]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   89.484972]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   89.484979]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   89.484987]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   89.484993]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   89.485000]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485006]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   89.485013]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   89.485019]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   89.485027]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   89.485034]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   89.485042]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   89.485049]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   89.485055]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   89.485062]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   89.485068]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   89.485075]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   89.485081]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   89.485088]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   89.485094]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   89.485100]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   89.485106]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   89.485113]  [<ffffffff80308020>] ? deny_write_access+0x30/0x70
[   89.485119]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485127]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   89.485133]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   89.485139]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   89.485145]  [<ffffffff8030550f>] kernel_read+0x3f/0x60
[   89.485151]  [<ffffffff803492ee>] load_elf_binary+0x1b6e/0x2020
[   89.485158]  [<ffffffff802cc768>] ? __lru_cache_add+0x48/0xd0
[   89.485165]  [<ffffffff802da2f7>] ? follow_page+0x237/0x340
[   89.485171]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   89.485177]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   89.485183]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   89.485189]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   89.485195]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485201]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   89.485207]  [<ffffffff80347780>] ? load_elf_binary+0x0/0x2020
[   89.485212]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   89.485218]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   89.485225]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   89.485231]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   90.486459] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   90.486468] in_atomic(): 0, irqs_disabled(): 1, pid: 4674, name: npviewer.bin
[   90.486472] INFO: lockdep is turned off.
[   90.486476] irq event stamp: 0
[   90.486479] hardirqs last  enabled at (0): [<(null)>] (null)
[   90.486485] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   90.486497] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   90.486505] softirqs last disabled at (0): [<(null)>] (null)
[   90.486512] Pid: 4674, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   90.486517] Call Trace:
[   90.486526]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   90.486533]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   90.486540]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   90.486547]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   90.486554]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   90.486560]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   90.486568]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486574]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   90.486581]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   90.486587]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   90.486594]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   90.486601]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   90.486609]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   90.486616]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   90.486622]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   90.486629]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   90.486636]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   90.486641]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   90.486649]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   90.486654]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486661]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   90.486667]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486674]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   90.486680]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   91.537577] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   91.537586] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   91.537591] INFO: lockdep is turned off.
[   91.537595] irq event stamp: 0
[   91.537598] hardirqs last  enabled at (0): [<(null)>] (null)
[   91.537604] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   91.537616] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   91.537624] softirqs last disabled at (0): [<(null)>] (null)
[   91.537631] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   91.537636] Call Trace:
[   91.537645]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   91.537651]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   91.537659]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   91.537666]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   91.537673]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   91.537679]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   91.537687]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   91.537692]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   91.537700]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   91.537706]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   91.537713]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   91.537719]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   92.548199] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   92.548208] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   92.548212] INFO: lockdep is turned off.
[   92.548216] irq event stamp: 0
[   92.548219] hardirqs last  enabled at (0): [<(null)>] (null)
[   92.548225] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   92.548237] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   92.548245] softirqs last disabled at (0): [<(null)>] (null)
[   92.548252] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   92.548257] Call Trace:
[   92.548266]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   92.548273]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   92.548280]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   92.548286]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   92.548294]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   92.548300]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   92.548308]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   92.548313]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   92.548321]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   92.548327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   92.548334]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   92.548340]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   93.602269] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   93.602278] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   93.602283] INFO: lockdep is turned off.
[   93.602287] irq event stamp: 0
[   93.602290] hardirqs last  enabled at (0): [<(null)>] (null)
[   93.602296] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   93.602308] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   93.602315] softirqs last disabled at (0): [<(null)>] (null)
[   93.602322] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   93.602327] Call Trace:
[   93.602336]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   93.602343]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   93.602350]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   93.602357]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   93.602364]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   93.602370]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   93.602378]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602384]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   93.602391]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   93.602397]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   93.602404]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   93.602411]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   93.602418]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   93.602426]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   93.602432]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   93.602439]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   93.602445]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   93.602451]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   93.602458]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   93.602464]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602470]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   93.602476]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602483]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   93.602489]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   94.604670] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   94.604680] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   94.604685] INFO: lockdep is turned off.
[   94.604688] irq event stamp: 0
[   94.604692] hardirqs last  enabled at (0): [<(null)>] (null)
[   94.604697] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   94.604709] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   94.604717] softirqs last disabled at (0): [<(null)>] (null)
[   94.604724] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   94.604729] Call Trace:
[   94.604738]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   94.604745]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   94.604752]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   94.604759]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   94.604766]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   94.604772]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   94.604780]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   94.604785]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   94.604793]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   94.604798]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   94.604806]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   94.604813]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   94.604820]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   94.604828]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   94.604834]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   94.604840]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   94.604847]  [<ffffffff802cbae5>] ondemand_readahead+0x205/0x210
[   94.604853]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   94.604859]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   94.604866]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   94.604872]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   94.604879]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   94.604885]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   94.604892]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   94.604899]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   94.604905]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   94.604911]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   94.604917]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   95.614963] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   95.614972] in_atomic(): 0, irqs_disabled(): 1, pid: 4076, name: Xorg
[   95.614977] INFO: lockdep is turned off.
[   95.614981] irq event stamp: 0
[   95.614984] hardirqs last  enabled at (0): [<(null)>] (null)
[   95.614990] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   95.615002] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   95.615010] softirqs last disabled at (0): [<(null)>] (null)
[   95.615017] Pid: 4076, comm: Xorg Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   95.615022] Call Trace:
[   95.615031]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   95.615038]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   95.615045]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   95.615052]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   95.615059]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   95.615065]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   95.615074]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   95.615080]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   95.615088]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   95.615094]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   95.615103]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   95.615109]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   96.657001] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   96.657011] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   96.657016] INFO: lockdep is turned off.
[   96.657020] irq event stamp: 0
[   96.657023] hardirqs last  enabled at (0): [<(null)>] (null)
[   96.657029] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   96.657042] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   96.657049] softirqs last disabled at (0): [<(null)>] (null)
[   96.657056] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   96.657061] Call Trace:
[   96.657071]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   96.657077]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   96.657085]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   96.657091]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   96.657099]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   96.657105]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   96.657113]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   96.657119]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   96.657127]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   96.657133]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   96.657140]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   96.657146]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   96.657154]  [<ffffffff8043d6dd>] ? copy_user_generic_string+0x2d/0x40
[   96.657161]  [<ffffffff8031cb6a>] ? seq_read+0x2aa/0x370
[   96.657167]  [<ffffffff8031c8c0>] ? seq_read+0x0/0x370
[   96.657174]  [<ffffffff8034bf74>] proc_reg_read+0x84/0xc0
[   96.657180]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   96.657186]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   96.657193]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   96.657198]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   97.670557] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   97.670566] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   97.670570] INFO: lockdep is turned off.
[   97.670574] irq event stamp: 0
[   97.670577] hardirqs last  enabled at (0): [<(null)>] (null)
[   97.670583] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   97.670595] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   97.670602] softirqs last disabled at (0): [<(null)>] (null)
[   97.670609] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   97.670614] Call Trace:
[   97.670623]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   97.670630]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   97.670638]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   97.670644]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   97.670652]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   97.670658]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   97.670666]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670672]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   97.670678]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   97.670685]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   97.670690]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   97.670697]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670704]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   97.670710]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670716]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   97.670723]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   97.670730]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   97.670737]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   97.670744]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   97.670750]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670756]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   97.670762]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   97.670767]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   97.670775]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   97.670781]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   98.670643] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   98.670652] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   98.670657] INFO: lockdep is turned off.
[   98.670660] irq event stamp: 0
[   98.670664] hardirqs last  enabled at (0): [<(null)>] (null)
[   98.670669] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   98.670681] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   98.670689] softirqs last disabled at (0): [<(null)>] (null)
[   98.670696] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   98.670700] Call Trace:
[   98.670710]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   98.670716]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   98.670723]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   98.670730]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   98.670738]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   98.670744]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   98.670751]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670757]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   98.670764]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   98.670770]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   98.670776]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   98.670782]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670790]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   98.670796]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670802]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   98.670809]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   98.670816]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   98.670823]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   98.670830]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   98.670836]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670842]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   98.670848]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   98.670853]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   98.670861]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   98.670866]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   99.707188] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   99.707197] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   99.707202] INFO: lockdep is turned off.
[   99.707206] irq event stamp: 0
[   99.707209] hardirqs last  enabled at (0): [<(null)>] (null)
[   99.707215] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   99.707226] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   99.707234] softirqs last disabled at (0): [<(null)>] (null)
[   99.707241] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   99.707245] Call Trace:
[   99.707254]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   99.707261]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   99.707268]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   99.707275]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   99.707283]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   99.707289]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   99.707297]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707302]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   99.707309]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   99.707315]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   99.707321]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   99.707327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707335]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   99.707341]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707347]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   99.707354]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   99.707361]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   99.707367]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   99.707374]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   99.707381]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707386]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   99.707392]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   99.707398]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   99.707406]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   99.707411]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  100.712941] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  100.712950] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  100.712955] INFO: lockdep is turned off.
[  100.712959] irq event stamp: 0
[  100.712962] hardirqs last  enabled at (0): [<(null)>] (null)
[  100.712968] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  100.712980] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  100.712987] softirqs last disabled at (0): [<(null)>] (null)
[  100.712994] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  100.712999] Call Trace:
[  100.713008]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  100.713015]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  100.713023]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  100.713030]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  100.713038]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  100.713044]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  100.713052]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713058]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  100.713066]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  100.713072]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  100.713078]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  100.713084]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713092]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  100.713098]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713104]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  100.713112]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  100.713118]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  100.713125]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  100.713132]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  100.713139]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713145]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  100.713151]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  100.713157]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  100.713164]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  100.713170]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  101.714983] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  101.714992] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  101.714997] INFO: lockdep is turned off.
[  101.715001] irq event stamp: 0
[  101.715004] hardirqs last  enabled at (0): [<(null)>] (null)
[  101.715010] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  101.715022] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  101.715029] softirqs last disabled at (0): [<(null)>] (null)
[  101.715036] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  101.715041] Call Trace:
[  101.715050]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  101.715057]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  101.715064]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  101.715071]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  101.715080]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  101.715086]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  101.715094]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715100]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  101.715107]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  101.715113]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  101.715119]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  101.715125]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715134]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  101.715140]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715146]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  101.715153]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  101.715160]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  101.715167]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  101.715174]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  101.715180]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715187]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  101.715192]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  101.715198]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  101.715206]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  101.715212]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  102.714789] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  102.714798] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  102.714803] INFO: lockdep is turned off.
[  102.714807] irq event stamp: 0
[  102.714810] hardirqs last  enabled at (0): [<(null)>] (null)
[  102.714816] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  102.714828] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  102.714835] softirqs last disabled at (0): [<(null)>] (null)
[  102.714842] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  102.714847] Call Trace:
[  102.714856]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  102.714863]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  102.714870]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  102.714877]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  102.714885]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  102.714891]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  102.714899]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714905]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  102.714912]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  102.714918]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  102.714924]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  102.714930]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714938]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  102.714944]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714950]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  102.714957]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  102.714964]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  102.714971]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  102.714978]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  102.714985]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714991]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  102.714997]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  102.715002]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  102.715010]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  102.715016]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  103.715104] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  103.715113] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  103.715118] INFO: lockdep is turned off.
[  103.715122] irq event stamp: 0
[  103.715125] hardirqs last  enabled at (0): [<(null)>] (null)
[  103.715130] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  103.715143] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  103.715150] softirqs last disabled at (0): [<(null)>] (null)
[  103.715157] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  103.715162] Call Trace:
[  103.715171]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  103.715177]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  103.715185]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  103.715192]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  103.715199]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  103.715206]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  103.715213]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715219]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  103.715226]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  103.715233]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  103.715239]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  103.715245]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715252]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  103.715258]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715265]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  103.715272]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  103.715279]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  103.715285]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  103.715293]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  103.715299]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715305]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  103.715311]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  103.715317]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  103.715325]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  103.715331]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  104.738641] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  104.738650] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  104.738655] INFO: lockdep is turned off.
[  104.738659] irq event stamp: 0
[  104.738662] hardirqs last  enabled at (0): [<(null)>] (null)
[  104.738668] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  104.738680] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  104.738687] softirqs last disabled at (0): [<(null)>] (null)
[  104.738694] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  104.738699] Call Trace:
[  104.738708]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  104.738715]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  104.738723]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  104.738729]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  104.738737]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  104.738743]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  104.738751]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738757]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  104.738764]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  104.738770]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  104.738776]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  104.738783]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738790]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  104.738796]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738802]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  104.738810]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  104.738817]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  104.738823]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  104.738830]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  104.738837]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738843]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  104.738849]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  104.738855]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  104.738862]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  104.738868]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  105.743379] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  105.743388] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  105.743393] INFO: lockdep is turned off.
[  105.743397] irq event stamp: 0
[  105.743400] hardirqs last  enabled at (0): [<(null)>] (null)
[  105.743406] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  105.743417] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  105.743425] softirqs last disabled at (0): [<(null)>] (null)
[  105.743432] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  105.743437] Call Trace:
[  105.743446]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  105.743452]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  105.743460]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  105.743467]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  105.743474]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  105.743480]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  105.743488]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743494]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  105.743501]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  105.743507]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  105.743513]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  105.743520]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743527]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  105.743533]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743540]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  105.743547]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  105.743554]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  105.743560]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  105.743567]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  105.743574]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743580]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  105.743586]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  105.743592]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  105.743599]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  105.743605]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  106.750202] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  106.750211] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  106.750216] INFO: lockdep is turned off.
[  106.750220] irq event stamp: 0
[  106.750223] hardirqs last  enabled at (0): [<(null)>] (null)
[  106.750229] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  106.750241] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  106.750248] softirqs last disabled at (0): [<(null)>] (null)
[  106.750255] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  106.750260] Call Trace:
[  106.750269]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  106.750275]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  106.750283]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  106.750290]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  106.750297]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  106.750304]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  106.750311]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750317]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  106.750324]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  106.750331]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  106.750337]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  106.750343]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750350]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  106.750357]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750363]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  106.750370]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  106.750377]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  106.750383]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  106.750391]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  106.750397]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750403]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  106.750409]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  106.750415]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  106.750423]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  106.750429]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  107.753607] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  107.753616] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  107.753621] INFO: lockdep is turned off.
[  107.753624] irq event stamp: 0
[  107.753628] hardirqs last  enabled at (0): [<(null)>] (null)
[  107.753634] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  107.753645] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  107.753653] softirqs last disabled at (0): [<(null)>] (null)
[  107.753660] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  107.753665] Call Trace:
[  107.753674]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  107.753681]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  107.753688]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  107.753695]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  107.753703]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  107.753709]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  107.753717]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753723]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  107.753730]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  107.753736]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  107.753742]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  107.753748]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753756]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  107.753762]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753768]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  107.753775]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  107.753782]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  107.753789]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  107.753796]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  107.753803]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753809]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  107.753815]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  107.753821]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  107.753828]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  107.753834]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  108.755818] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  108.755827] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  108.755831] INFO: lockdep is turned off.
[  108.755835] irq event stamp: 0
[  108.755839] hardirqs last  enabled at (0): [<(null)>] (null)
[  108.755844] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  108.755856] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  108.755863] softirqs last disabled at (0): [<(null)>] (null)
[  108.755870] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  108.755875] Call Trace:
[  108.755884]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  108.755890]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  108.755898]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  108.755905]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  108.755912]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  108.755919]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  108.755927]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755933]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  108.755940]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  108.755946]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  108.755952]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  108.755958]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755966]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  108.755972]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755978]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  108.755985]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  108.755992]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  108.755999]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  108.756006]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  108.756013]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.756019]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  108.756025]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  108.756031]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  108.756038]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  108.756044]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  109.775203] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  109.775211] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  109.775216] INFO: lockdep is turned off.
[  109.775220] irq event stamp: 0
[  109.775223] hardirqs last  enabled at (0): [<(null)>] (null)
[  109.775229] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  109.775241] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  109.775248] softirqs last disabled at (0): [<(null)>] (null)
[  109.775255] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  109.775260] Call Trace:
[  109.775270]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  109.775277]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  109.775284]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  109.775291]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  109.775298]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  109.775305]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  109.775312]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775319]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  109.775326]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  109.775332]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  109.775338]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  109.775344]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775352]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  109.775358]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775364]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  109.775371]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  109.775378]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  109.775384]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  109.775392]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  109.775398]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775404]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  109.775410]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  109.775416]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  109.775423]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  109.775429]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  110.789131] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  110.789140] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  110.789145] INFO: lockdep is turned off.
[  110.789149] irq event stamp: 0
[  110.789152] hardirqs last  enabled at (0): [<(null)>] (null)
[  110.789158] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  110.789170] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  110.789177] softirqs last disabled at (0): [<(null)>] (null)
[  110.789184] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  110.789189] Call Trace:
[  110.789198]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  110.789205]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  110.789212]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  110.789219]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  110.789227]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  110.789233]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  110.789241]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789247]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  110.789254]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  110.789260]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  110.789266]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  110.789273]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789280]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  110.789286]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789292]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  110.789300]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  110.789306]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  110.789313]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  110.789320]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  110.789327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789333]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  110.789339]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  110.789345]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  110.789352]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  110.789358]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc4-rt1
# Thu Feb 12 01:05:56 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ASM_SEMAPHORES=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y
# CONFIG_X86_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32 CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y CONFIG_PREEMPT_HARDIRQS=y CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_DV1394=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_XEN is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
CONFIG_DRM_I830=y
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_XEN_BALLOON is not set
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_TRACING=y

#
# Tracers
#
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_SECURITY_SMACK=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

#2 lore raw
Quoted 39 lines · Frederic Weisbecker
Quoted 28 lines · Thomas Gleixner

After a 1.5 years sabbatical from preempt-rt we are pleased to announce a refactored preempt-rt patch against linux-2.6.29-rc4.

The patch is working on x86 (32 and 64bit) but we have not yet updated ARM, PPC and MIPS (work in progress).

We also dropped some experimental features of the base preempt-rt queue 2.6.26.8-rt15 simply because we wanted to survive the forward port over 3 kernel releases with the least amount of surprises. These features (e.g. multiple reader PI locks) are not essential for the preempt-rt functionality and need some serious overhaul anyway.

The interested -rt observer might have noticed that we based our work on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree which is based on 2.6.28. The reason for this is that we wanted to pick the most stable patch queue and the git-rt tree has a lot of rewritten new code. Our work is not making the work which was done over the last months in the git-rt tree obsolete, quite the contrary: we want to provide a stable yet latest-kernel based foundation and integrate those changes gradually, as they become ready.

The further plan for the new -rt series is to merge it fully into git and integrate it into the -tip git tree so it gets the same treatment as all of our -tip based work: fully automated compile and boot testing. Furthermore an automated multi architecture -rt performance regression test based on the same infrastructure is currently being built.

Quoted 8 lines

The integration into the -tip tree also allows us to seperate out parts of -rt which are ready for mainline more easily and integrate them with our usual propagation to mainline.

The structure of the patches is likely to change over the next days when we tackle the git integration, but we appreciate your feedback in the form of comments, bugreports and patches.

Quoted 6 lines

Hi!

I get some sleep while atomic warnings.
I've put the log and my config in attachment.

Note, it's a wicked bug: I can't reproduce it anymore.
I would have been glad to give you an irqsoff trace but I can't :-)

Oh yes I have two other warnings, for the second one, I'm not sure this is really only present in -rt.

The first one, a lockdep warning:

[    2.975320] ---------------------------------
[    2.975320] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[    2.975320] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[    2.975320]  (per_cpu__lock_slab_irq_locks_locked#2){+-..}, at: [<ffffffff802f6823>] kfree+0x43/0xc0
[    2.975320] {hardirq-on-W} state was registered at:
[    2.975320]   [<ffffffff802822c5>] __lock_acquire+0x6f5/0x1b20
[    2.975320]   [<ffffffff8028378f>] lock_acquire+0x9f/0xe0
[    2.975320]   [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
[    2.975320]   [<ffffffff802f8251>] kmem_cache_alloc+0x51/0x1f0
[    2.975320]   [<ffffffff80253eab>] copy_process+0x9b/0x1500
[    2.975320]   [<ffffffff802553a0>] do_fork+0x90/0x4a0
[    2.975320]   [<ffffffff80213552>] kernel_thread+0x82/0xe0
[    2.975320]   [<ffffffff802135ba>] child_rip+0xa/0x20
[    2.975320]   [<ffffffffffffffff>] 0xffffffffffffffff
[    2.975320] irq event stamp: 18114
[    2.975320] hardirqs last  enabled at (18113): [<ffffffff8021a935>] default_idle+0x55/0x60
[    2.975320] hardirqs last disabled at (18114): [<ffffffff8021222a>] save_args+0x6a/0x70
[    2.975320] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[    2.975320] softirqs last disabled at (0): [<(null)>] (null)
[    2.975320] 
[    2.975320] other info that might help us debug this:
[    2.975320] no locks held by swapper/0.
[    2.975320] 
[    2.975320] stack backtrace:
[    2.975320] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt1-tip #1
[    2.975320] Call Trace:
[    2.975320]  <IRQ>  [<ffffffff8027fcbc>] print_usage_bug+0x19c/0x200
[    2.975320]  [<ffffffff8021e6af>] ? save_stack_trace+0x2f/0x50
[    2.975320]  [<ffffffff80280315>] mark_lock+0x2a5/0xcd0
[    2.975320]  [<ffffffff8028245e>] __lock_acquire+0x88e/0x1b20
[    2.975320]  [<ffffffff8028216b>] ? __lock_acquire+0x59b/0x1b20
[    2.975320]  [<ffffffff802243e4>] ? post_set+0x64/0x70
[    2.975320]  [<ffffffff8028378f>] lock_acquire+0x9f/0xe0
[    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
[    2.975320]  [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
[    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
[    2.975320]  [<ffffffff802f6823>] kfree+0x43/0xc0
[    2.975320]  [<ffffffff8027f2fd>] ? trace_hardirqs_off+0xd/0x10
[    2.975320]  [<ffffffff8028a156>] generic_smp_call_function_single_interrupt+0x106/0x110
[    2.975320]  [<ffffffff80227144>] smp_call_function_single_interrupt+0x24/0x40
[    2.975320]  [<ffffffff80213223>] call_function_single_interrupt+0x13/0x20
[    2.975320]  <EOI>  [<ffffffff8022df7b>] ? native_safe_halt+0xb/0x10
[    2.975320]  [<ffffffff8022df79>] ? native_safe_halt+0x9/0x10
[    2.975320]  [<ffffffff8021a93a>] ? default_idle+0x5a/0x60
[    2.975320]  [<ffffffff8021136e>] ? cpu_idle+0x7e/0x100
[    2.975320]  [<ffffffff80775b6c>] ? start_secondary+0x197/0x1eb

The second, a sysfs warning:

[    8.042459] ------------[ cut here ]------------
[    8.054763] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x51/0x60()
[    8.066777] Hardware name: AMILO Li 2727                  
[    8.078555] sysfs: duplicate filename '14:4' can not be created
[    8.090353] Pid: 33, comm: work_on_cpu/0 Not tainted 2.6.29-rc4-rt1-tip #1
[    8.102482] Call Trace:
[    8.102492]  [<ffffffff80255ea3>] warn_slowpath+0xd3/0x130
[    8.102500]  [<ffffffff8077cbeb>] ? _mutex_unlock+0x2b/0x40
[    8.102508]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102513]  [<ffffffff8035c835>] ? sysfs_find_dirent+0x35/0x50
[    8.102518]  [<ffffffff8035c9f4>] ? __sysfs_add_one+0x24/0xe0
[    8.102523]  [<ffffffff8035cb01>] sysfs_add_one+0x51/0x60
[    8.102528]  [<ffffffff8035dcb3>] sysfs_do_create_link+0x103/0x170
[    8.102533]  [<ffffffff8035dd53>] sysfs_create_link+0x13/0x20
[    8.102540]  [<ffffffff8051d739>] device_add+0x209/0x620
[    8.102547]  [<ffffffff80289128>] ? __rt_spin_lock_init+0x48/0x60
[    8.102552]  [<ffffffff8051db6e>] device_register+0x1e/0x30
[    8.102557]  [<ffffffff8051dc64>] device_create_vargs+0xe4/0x100
[    8.102563]  [<ffffffff8051dcd0>] device_create+0x50/0x60
[    8.102570]  [<ffffffff80612a25>] ? sound_insert_unit+0x55/0x1e0
[    8.102575]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[    8.102579]  [<ffffffff80612a25>] ? sound_insert_unit+0x55/0x1e0
[    8.102584]  [<ffffffff80612afa>] sound_insert_unit+0x12a/0x1e0
[    8.102590]  [<ffffffff80612d35>] register_sound_special_device+0xa5/0x220
[    8.102595]  [<ffffffff8077c112>] ? rt_mutex_lock+0x22/0x60
[    8.102601]  [<ffffffff80625499>] snd_register_oss_device+0x239/0x2c0
[    8.102608]  [<ffffffff8063b2b0>] register_oss_dsp+0x60/0x90
[    8.102613]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102618]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102623]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102629]  [<ffffffff8063f5e7>] snd_pcm_oss_register_minor+0x167/0x260
[    8.102634]  [<ffffffff80627955>] ? snd_timer_dev_register+0x35/0x130
[    8.102640]  [<ffffffff80627a0b>] ? snd_timer_dev_register+0xeb/0x130
[    8.102645]  [<ffffffff80624855>] ? snd_device_register+0x65/0x80
[    8.102650]  [<ffffffff806365af>] ? snd_pcm_timer_init+0x14f/0x1a0
[    8.102656]  [<ffffffff8062b79d>] snd_pcm_dev_register+0x1ad/0x2c0
[    8.102661]  [<ffffffff80212000>] ? sys_rt_sigreturn+0x250/0x290
[    8.102667]  [<ffffffff806247c9>] snd_device_register_all+0x39/0x60
[    8.102672]  [<ffffffff8061f25a>] snd_card_register+0x3a/0x3d0
[    8.102678]  [<ffffffff8076e5a6>] azx_probe+0x7b6/0xa90
[    8.102685]  [<ffffffff80677960>] ? azx_send_cmd+0x0/0x120
[    8.102690]  [<ffffffff80677a80>] ? azx_get_response+0x0/0x240
[    8.102695]  [<ffffffff80676eb0>] ? azx_attach_pcm_stream+0x0/0x1c0
[    8.102701]  [<ffffffff8026a5c0>] ? do_work_for_cpu+0x0/0x30
[    8.102708]  [<ffffffff80455847>] local_pci_probe+0x17/0x20
[    8.102713]  [<ffffffff8026a5d8>] do_work_for_cpu+0x18/0x30
[    8.102718]  [<ffffffff8026a88d>] run_workqueue+0x16d/0x2c0
[    8.102722]  [<ffffffff8026a83a>] ? run_workqueue+0x11a/0x2c0
[    8.102727]  [<ffffffff8026aa8f>] worker_thread+0xaf/0x130
[    8.102733]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[    8.102738]  [<ffffffff8026a9e0>] ? worker_thread+0x0/0x130
[    8.102742]  [<ffffffff8026a9e0>] ? worker_thread+0x0/0x130
[    8.102747]  [<ffffffff8026f0ee>] kthread+0x4e/0x90
[    8.102752]  [<ffffffff802135ba>] child_rip+0xa/0x20
[    8.102757]  [<ffffffff80212f54>] ? restore_args+0x0/0x30
[    8.102762]  [<ffffffff8026f0a0>] ? kthread+0x0/0x90
[    8.102766]  [<ffffffff802135b0>] ? child_rip+0x0/0x20
[    8.102777] ---[ end trace 57b9b5741e12ebf7 ]---
#3 lore raw
Quoted 14 lines · Frederic Weisbecker

The first one, a lockdep warning:

[    2.975320]  [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
[    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
[    2.975320]  [<ffffffff802f6823>] kfree+0x43/0xc0
[    2.975320]  [<ffffffff8027f2fd>] ? trace_hardirqs_off+0xd/0x10
[    2.975320]  [<ffffffff8028a156>] generic_smp_call_function_single_interrupt+0x106/0x110
[    2.975320]  [<ffffffff80227144>] smp_call_function_single_interrupt+0x24/0x40
[    2.975320]  [<ffffffff80213223>] call_function_single_interrupt+0x13/0x20
[    2.975320]  <EOI>  [<ffffffff8022df7b>] ? native_safe_halt+0xb/0x10
[    2.975320]  [<ffffffff8022df79>] ? native_safe_halt+0x9/0x10
[    2.975320]  [<ffffffff8021a93a>] ? default_idle+0x5a/0x60
[    2.975320]  [<ffffffff8021136e>] ? cpu_idle+0x7e/0x100
[    2.975320]  [<ffffffff80775b6c>] ? start_secondary+0x197/0x1eb

hm, that's a complex one - we do kfree() from IPI context, dunno why this never triggered in our testing of -rt1.

Quoted 6 lines

The second, a sysfs warning:

[    8.042459] ------------[ cut here ]------------
[    8.054763] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x51/0x60()
[    8.066777] Hardware name: AMILO Li 2727                  
[    8.078555] sysfs: duplicate filename '14:4' can not be created

that should be harmless - unless you only get it under -rt1.

Ingo

#4 lore raw

PATCH 1/1 rt: fix ipi kfree(), introduce IPI_SOFTIRQ

Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

Ingo

------------------>
Subject: rt: fix ipi kfree(), introduce IPI_SOFTIRQ
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 09:06:11 CET 2009

in 2.6.28 generic_smp_call_function_interrupt() grew a kfree(), which is a rather complex, sleepable method under -rt. But the IPI code runs as a hardirq - which cannot run such code.

So defer this work to a softirq context instead. It still stays on the same CPU so the percpu IPI assumptions are upheld.

---
 include/linux/interrupt.h |    1 +
 include/linux/smp.h       |    3 +++
 init/main.c               |    1 +
 kernel/smp.c              |   15 +++++++++++++--
 4 files changed, 18 insertions(+), 2 deletions(-)
include/linux/interrupt.h +1 -0
Index: tip/include/linux/interrupt.h
===================================================================
@@ -257,6 +257,7 @@ enum
 	SCHED_SOFTIRQ,
 	HRTIMER_SOFTIRQ,
 	RCU_SOFTIRQ,	/* Preferable RCU should always be the last softirq */
+	IPI_SOFTIRQ,
 	/* Entries after this are ignored in split softirq mode */
 	MAX_SOFTIRQ,
 
include/linux/smp.h +3 -0
Index: tip/include/linux/smp.h
===================================================================
@@ -104,6 +104,9 @@ void ipi_call_lock(void);
 void ipi_call_unlock(void);
 void ipi_call_lock_irq(void);
 void ipi_call_unlock_irq(void);
+void ipi_init(void);
+#else
+static inline void ipi_init(void) { }
 #endif
 
 /*
init/main.c +1 -0
Index: tip/init/main.c
===================================================================
@@ -606,6 +606,7 @@ asmlinkage void __init start_kernel(void
 	/* init some links before init_ISA_irqs() */
 	early_irq_init();
 	init_IRQ();
+	ipi_init();
 	pidhash_init();
 	init_timers();
 	hrtimers_init();
kernel/smp.c +13 -2
Index: tip/kernel/smp.c
===================================================================
@@ -4,12 +4,13 @@
  * (C) Jens Axboe <[email protected]> 2008
  *
  */
+#include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
-#include <linux/rcupdate.h>
 #include <linux/rculist.h>
-#include <linux/smp.h>
+#include <linux/rcupdate.h>
+#include <linux/interrupt.h>
 
 static DEFINE_PER_CPU(struct call_single_queue, call_single_queue);
 static LIST_HEAD(call_function_queue);
@@ -152,6 +153,11 @@ void generic_smp_call_function_interrupt
  */
 void generic_smp_call_function_single_interrupt(void)
 {
+	raise_softirq_irqoff(IPI_SOFTIRQ);
+}
+
+static void run_generic_smp_call_function_single(struct softirq_action *h)
+{
 	struct call_single_queue *q = &__get_cpu_var(call_single_queue);
 	LIST_HEAD(list);
 
@@ -430,3 +436,8 @@ void ipi_call_unlock_irq(void)
 {
 	spin_unlock_irq(&call_function_lock);
 }
+
+void __init ipi_init(void)
+{
+	open_softirq(IPI_SOFTIRQ, run_generic_smp_call_function_single);
+}
#5 lore raw

Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ

Quoted 11 lines · Ingo Molnar

------------------>
Subject: rt: fix ipi kfree(), introduce IPI_SOFTIRQ
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 09:06:11 CET 2009

in 2.6.28 generic_smp_call_function_interrupt() grew a kfree(), which is a rather complex, sleepable method under -rt. But the IPI code runs as a hardirq - which cannot run such code.

So defer this work to a softirq context instead. It still stays on the same CPU so the percpu IPI assumptions are upheld.

On a second thought ...

I think we could eliminate the kfree() instead, and keep the atomicity of IPI cross-calls. Linus expressed doubts about the IPI kmalloc()/kfree() pair we do in the generic SMP IPI code, suggesting that it probably does not help performance all that much - so such a change might be upstream-able as well and would keep -rt closer to mainline.

Ingo

#6 lore raw

Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ

In reply to Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

ok, it's lightly tested now: it built and booted up fine to X with your config.

Ingo

maintainer
#7 lore raw

Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ

In reply to Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
kernel/smp.c +8 -0
index bbedbb7..9b974c1 100644
@@ -252,7 +252,11 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
+#ifndef CONFIG_PREEMPT_RT
 			data = kmalloc(sizeof(*data), GFP_ATOMIC);
+#else
+			data = NULL;
+#endif
 			if (data)
 				data->flags = CSD_FLAG_ALLOC;
 			else {
@@ -347,7 +351,11 @@ void smp_call_function_many(const struct cpumask *mask,
 		return;
 	}
 
+#ifndef CONFIG_PREEMPT_RT
 	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
+#else
+	data = NULL;
+#endif
 	if (unlikely(!data)) {
 		/* Slow path. */
 		for_each_online_cpu(cpu) {
#8 lore raw

PATCH 1/1 generic-ipi: remove kmalloc, cleanup

Quoted 5 lines · Peter Zijlstra
Quoted 4 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

Quoted 8 lines
Quoted 2 lines

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a performance point of view. If they are, it will all be clearly bisectable.

Ingo

--------------->
Subject: generic-ipi: remove kmalloc, cleanup
From: Ingo Molnar <[email protected]>

Now that we dont use the kmalloc() sequence anymore, remove CSD_FLAG_ALLOC and all its dependencies.

---
 kernel/smp.c |   86 +++++++++++------------------------------------------------
 1 file changed, 17 insertions(+), 69 deletions(-)
kernel/smp.c +17 -65
Index: tip/kernel/smp.c
===================================================================
@@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
 
 enum {
 	CSD_FLAG_WAIT		= 0x01,
-	CSD_FLAG_ALLOC		= 0x02,
-	CSD_FLAG_LOCK		= 0x04,
+	CSD_FLAG_LOCK		= 0x02,
 };
 
 struct call_function_data {
@@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
 		csd_flag_wait(data);
 }
 
-static void rcu_free_call_data(struct rcu_head *head)
-{
-	struct call_function_data *data;
-
-	data = container_of(head, struct call_function_data, rcu_head);
-
-	kfree(data);
-}
-
 /*
  * Invoked by arch to handle an IPI for call function. Must be called with
  * interrupts disabled.
@@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
 		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
-			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
 
@@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
 			} else if (data_flags & CSD_FLAG_LOCK) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_LOCK;
-			} else if (data_flags & CSD_FLAG_ALLOC)
-				kfree(data);
+			}
 		}
 		/*
 		 * See comment on outer loop
@@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
 			/*
 			 * We are calling a function on a single CPU
 			 * and we are not going to wait for it to finish.
-			 * We first try to allocate the data, but if we
-			 * fail, we fall back to use a per cpu data to pass
-			 * the information to that CPU. Since all callers
-			 * of this code will use the same data, we must
-			 * synchronize the callers to prevent a new caller
-			 * from corrupting the data before the callee
-			 * can access it.
+			 * We use a per cpu data to pass the information to
+			 * that CPU. Since all callers of this code will use
+			 * the same data, we must synchronize the callers to
+			 * prevent a new caller from corrupting the data before
+			 * the callee can access it.
 			 *
 			 * The CSD_FLAG_LOCK is used to let us know when
 			 * the IPI handler is done with the data.
@@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
-			data = NULL;
-			if (data)
-				data->flags = CSD_FLAG_ALLOC;
-			else {
-				data = &per_cpu(csd_data, me);
-				while (data->flags & CSD_FLAG_LOCK)
-					cpu_relax();
-				data->flags = CSD_FLAG_LOCK;
-			}
+			data = &per_cpu(csd_data, me);
+			while (data->flags & CSD_FLAG_LOCK)
+				cpu_relax();
+			data->flags = CSD_FLAG_LOCK;
 		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
@@ -321,8 +301,6 @@ void smp_call_function_many(const struct
 			    void (*func)(void *), void *info,
 			    bool wait)
 {
-	struct call_function_data *data;
-	unsigned long flags;
 	int cpu, next_cpu;
 
 	/* Can deadlock when called with interrupts disabled */
@@ -347,43 +325,13 @@ void smp_call_function_many(const struct
 		return;
 	}
 
-	data = NULL;
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	/* Slow path. */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		if (cpumask_test_cpu(cpu, mask))
+			smp_call_function_single(cpu, func, info, wait);
 	}
-
-	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
-	if (wait)
-		data->csd.flags |= CSD_FLAG_WAIT;
-	data->csd.func = func;
-	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
-
-	spin_lock_irqsave(&call_function_lock, flags);
-	list_add_tail_rcu(&data->csd.list, &call_function_queue);
-	spin_unlock_irqrestore(&call_function_lock, flags);
-
-	/*
-	 * Make the list addition visible before sending the ipi.
-	 */
-	smp_mb();
-
-	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
maintainer
#9 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 16 lines · Ingo Molnar
Quoted 5 lines · Peter Zijlstra
Quoted 4 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

Quoted 8 lines
Quoted 2 lines

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
Quoted 6 lines

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a performance point of view. If they are, it will all be clearly bisectable.

Right, except I really don't like the smp_call_function_many() slow path that's now the only path.

Rusty did that I think, but he also had some idea on how to fix it, I think it boiled down to sticking a count in the call data instead of the full cpumask.

So I'd rather we first fix that code, and then remove the kmalloc all-together like you propose here.

Quoted 161 lines

Ingo

--------------->
Subject: generic-ipi: remove kmalloc, cleanup
From: Ingo Molnar <[email protected]>

Now that we dont use the kmalloc() sequence anymore, remove CSD_FLAG_ALLOC and all its dependencies.

---
 kernel/smp.c |   86 +++++++++++------------------------------------------------
 1 file changed, 17 insertions(+), 69 deletions(-)

Index: tip/kernel/smp.c
===================================================================

kernel/smp.c +17 -69
@@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
 
 enum {
 	CSD_FLAG_WAIT		= 0x01,
-	CSD_FLAG_ALLOC		= 0x02,
-	CSD_FLAG_LOCK		= 0x04,
+	CSD_FLAG_LOCK		= 0x02,
 };
 
 struct call_function_data {
@@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
 		csd_flag_wait(data);
 }
 
-static void rcu_free_call_data(struct rcu_head *head)
-{
-	struct call_function_data *data;
-
-	data = container_of(head, struct call_function_data, rcu_head);
-
-	kfree(data);
-}
-
 /*
  * Invoked by arch to handle an IPI for call function. Must be called with
  * interrupts disabled.
@@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
 		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
-			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
 
@@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
 			} else if (data_flags & CSD_FLAG_LOCK) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_LOCK;
-			} else if (data_flags & CSD_FLAG_ALLOC)
-				kfree(data);
+			}
 		}
 		/*
 		 * See comment on outer loop
@@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
 			/*
 			 * We are calling a function on a single CPU
 			 * and we are not going to wait for it to finish.
-			 * We first try to allocate the data, but if we
-			 * fail, we fall back to use a per cpu data to pass
-			 * the information to that CPU. Since all callers
-			 * of this code will use the same data, we must
-			 * synchronize the callers to prevent a new caller
-			 * from corrupting the data before the callee
-			 * can access it.
+			 * We use a per cpu data to pass the information to
+			 * that CPU. Since all callers of this code will use
+			 * the same data, we must synchronize the callers to
+			 * prevent a new caller from corrupting the data before
+			 * the callee can access it.
 			 *
 			 * The CSD_FLAG_LOCK is used to let us know when
 			 * the IPI handler is done with the data.
@@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
-			data = NULL;
-			if (data)
-				data->flags = CSD_FLAG_ALLOC;
-			else {
-				data = &per_cpu(csd_data, me);
-				while (data->flags & CSD_FLAG_LOCK)
-					cpu_relax();
-				data->flags = CSD_FLAG_LOCK;
-			}
+			data = &per_cpu(csd_data, me);
+			while (data->flags & CSD_FLAG_LOCK)
+				cpu_relax();
+			data->flags = CSD_FLAG_LOCK;
 		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
@@ -321,8 +301,6 @@ void smp_call_function_many(const struct
 			    void (*func)(void *), void *info,
 			    bool wait)
 {
-	struct call_function_data *data;
-	unsigned long flags;
 	int cpu, next_cpu;
 
 	/* Can deadlock when called with interrupts disabled */
@@ -347,43 +325,13 @@ void smp_call_function_many(const struct
 		return;
 	}
 
-	data = NULL;
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	/* Slow path. */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		if (cpumask_test_cpu(cpu, mask))
+			smp_call_function_single(cpu, func, info, wait);
 	}
-
-	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
-	if (wait)
-		data->csd.flags |= CSD_FLAG_WAIT;
-	data->csd.func = func;
-	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
-
-	spin_lock_irqsave(&call_function_lock, flags);
-	list_add_tail_rcu(&data->csd.list, &call_function_queue);
-	spin_unlock_irqrestore(&call_function_lock, flags);
-
-	/*
-	 * Make the list addition visible before sending the ipi.
-	 */
-	smp_mb();
-
-	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
-
-	/* optionally wait for the CPUs to complete */
-	if (wait)
-		csd_flag_wait(&data->csd);
 }
 EXPORT_SYMBOL(smp_call_function_many);
 
maintainer
#10 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 27 lines · Peter Zijlstra
Quoted 16 lines · Ingo Molnar
Quoted 5 lines · Peter Zijlstra
Quoted 4 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

Quoted 8 lines
Quoted 2 lines

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
Quoted 6 lines

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a performance point of view. If they are, it will all be clearly bisectable.

Right, except I really don't like the smp_call_function_many() slow path that's now the only path.

Quoted 6 lines

Rusty did that I think, but he also had some idea on how to fix it, I think it boiled down to sticking a count in the call data instead of the full cpumask.

So I'd rather we first fix that code, and then remove the kmalloc all-together like you propose here.

Right, I can't see a way around carrying that cpumask, there's just too much that can go wrong without it.

So it put in unconditionally, how about this?

--
Subject: generic-smp: remove single ipi fallback for smp_call_function_many()

In preparation of removing the kmalloc() calls from the generic-ipi code get rid of the single ipi fallback for smp_call_function_many().

Because we cannot get around carrying the cpumask in the data -- imagine 2 such calls with different but overlapping masks -- put in a full mask.

---
 kernel/smp.c |   47 ++++++++++++++++++++++++-----------------------
 1 files changed, 24 insertions(+), 23 deletions(-)
kernel/smp.c +24 -23
index bbedbb7..e6658e5 100644
@@ -26,7 +26,7 @@ struct call_function_data {
 	spinlock_t lock;
 	unsigned int refs;
 	struct rcu_head rcu_head;
-	unsigned long cpumask_bits[];
+	struct cpumask cpumask;
 };
 
 struct call_single_queue {
@@ -111,13 +111,13 @@ void generic_smp_call_function_interrupt(void)
 	list_for_each_entry_rcu(data, &call_function_queue, csd.list) {
 		int refs;
 
-		if (!cpumask_test_cpu(cpu, to_cpumask(data->cpumask_bits)))
+		if (!cpumask_test_cpu(cpu, &data->cpumask))
 			continue;
 
 		data->csd.func(data->csd.info);
 
 		spin_lock(&data->lock);
-		cpumask_clear_cpu(cpu, to_cpumask(data->cpumask_bits));
+		cpumask_clear_cpu(cpu, &data->cpumask);
 		WARN_ON(data->refs == 0);
 		data->refs--;
 		refs = data->refs;
@@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
+		} else if (data->csd.flags & CSD_FLAG_LOCK) {
+			smp_wmb();
+			data->csd.flags &= ~CSD_FLAG_LOCK;
+		} else if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
@@ -302,6 +304,8 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
 	arch_send_call_function_ipi(*(maskp))
 #endif
 
+static DEFINE_PER_CPU(struct call_function_data, cfd_data);
+
 /**
  * smp_call_function_many(): Run a function on a set of other CPUs.
  * @mask: The set of cpus to run on (only runs on online subset).
@@ -323,14 +327,14 @@ void smp_call_function_many(const struct cpumask *mask,
 {
 	struct call_function_data *data;
 	unsigned long flags;
-	int cpu, next_cpu;
+	int cpu, next_cpu, me = smp_processor_id();
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
 
 	/* So, what's a CPU they want?  Ignoring this one. */
 	cpu = cpumask_first_and(mask, cpu_online_mask);
-	if (cpu == smp_processor_id())
+	if (cpu == me)
 		cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
 	/* No online cpus?  We're done. */
 	if (cpu >= nr_cpu_ids)
@@ -338,7 +342,7 @@ void smp_call_function_many(const struct cpumask *mask,
 
 	/* Do we have another CPU which isn't us? */
 	next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
-	if (next_cpu == smp_processor_id())
+	if (next_cpu == me)
 		next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask);
 
 	/* Fastpath: do that cpu by itself. */
@@ -347,27 +351,24 @@ void smp_call_function_many(const struct cpumask *mask,
 		return;
 	}
 
-	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	data = kmalloc(sizeof(*data), GFP_ATOMIC);
+	if (data)
+		data->csd.flags = CSD_FLAG_ALLOC;
+	else {
+		data = &per_cpu(cfd_data, me);
+		while (data->csd.flags & CSD_FLAG_LOCK)
+			cpu_relax();
+		data->csd.flags = CSD_FLAG_LOCK;
 	}
 
 	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
 	if (wait)
 		data->csd.flags |= CSD_FLAG_WAIT;
 	data->csd.func = func;
 	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
+	cpumask_and(&data->cpumask, mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &data->cpumask);
+	data->refs = cpumask_weight(&data->cpumask);
 
 	spin_lock_irqsave(&call_function_lock, flags);
 	list_add_tail_rcu(&data->csd.list, &call_function_queue);
@@ -379,7 +380,7 @@ void smp_call_function_many(const struct cpumask *mask,
 	smp_mb();
 
 	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
+	arch_send_call_function_ipi_mask(&data->cpumask);
 
 	/* optionally wait for the CPUs to complete */
 	if (wait)
maintainer
#11 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

kernel/smp.c void generic_smp_call_function_interrupt(void) · line 146

Quoted 13 lines · Peter Zijlstra
kernel/smp.c +4 -2
@@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
+		} else if (data->csd.flags & CSD_FLAG_LOCK) {
+			smp_wmb();
+			data->csd.flags &= ~CSD_FLAG_LOCK;
+		} else if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();

Hmm, I think this bit ought to go in rcu_free_call_data(), otherwise we can have that same race again..

I'd better put a comment in on why we use RCU here.

maintainer
#12 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

In reply to Peter Zijlstra
Quoted 126 lines · Peter Zijlstra
Quoted 10 lines
Quoted 6 lines

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a performance point of view. If they are, it will all be clearly bisectable.

Right, except I really don't like the smp_call_function_many() slow path that's now the only path.

Quoted 6 lines

Rusty did that I think, but he also had some idea on how to fix it, I think it boiled down to sticking a count in the call data instead of the full cpumask.

So I'd rather we first fix that code, and then remove the kmalloc all-together like you propose here.

Right, I can't see a way around carrying that cpumask, there's just too much that can go wrong without it.

So it put in unconditionally, how about this?

--
Subject: generic-smp: remove single ipi fallback for smp_call_function_many()

In preparation of removing the kmalloc() calls from the generic-ipi code get rid of the single ipi fallback for smp_call_function_many().

Because we cannot get around carrying the cpumask in the data -- imagine 2 such calls with different but overlapping masks -- put in a full mask.

---
 kernel/smp.c |   47 ++++++++++++++++++++++++-----------------------
 1 files changed, 24 insertions(+), 23 deletions(-)
kernel/smp.c +12 -16
index bbedbb7..e6658e5 100644
@@ -26,7 +26,7 @@ struct call_function_data {
 	spinlock_t lock;
 	unsigned int refs;
 	struct rcu_head rcu_head;
-	unsigned long cpumask_bits[];
+	struct cpumask cpumask;
 };
 
 struct call_single_queue {
@@ -111,13 +111,13 @@ void generic_smp_call_function_interrupt(void)
 	list_for_each_entry_rcu(data, &call_function_queue, csd.list) {
 		int refs;
 
-		if (!cpumask_test_cpu(cpu, to_cpumask(data->cpumask_bits)))
+		if (!cpumask_test_cpu(cpu, &data->cpumask))
 			continue;
 
 		data->csd.func(data->csd.info);
 
 		spin_lock(&data->lock);
-		cpumask_clear_cpu(cpu, to_cpumask(data->cpumask_bits));
+		cpumask_clear_cpu(cpu, &data->cpumask);
 		WARN_ON(data->refs == 0);
 		data->refs--;
 		refs = data->refs;
@@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
+		} else if (data->csd.flags & CSD_FLAG_LOCK) {
+			smp_wmb();
+			data->csd.flags &= ~CSD_FLAG_LOCK;
+		} else if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
@@ -302,6 +304,8 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
 	arch_send_call_function_ipi(*(maskp))
 #endif
 
+static DEFINE_PER_CPU(struct call_function_data, cfd_data);
+
 /**
  * smp_call_function_many(): Run a function on a set of other CPUs.
  * @mask: The set of cpus to run on (only runs on online subset).
@@ -323,14 +327,14 @@ void smp_call_function_many(const struct cpumask *mask,
 {
 	struct call_function_data *data;
 	unsigned long flags;
-	int cpu, next_cpu;
+	int cpu, next_cpu, me = smp_processor_id();
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
 
 	/* So, what's a CPU they want?  Ignoring this one. */
 	cpu = cpumask_first_and(mask, cpu_online_mask);
-	if (cpu == smp_processor_id())
+	if (cpu == me)
 		cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
 	/* No online cpus?  We're done. */
 	if (cpu >= nr_cpu_ids)
@@ -338,7 +342,7 @@ void smp_call_function_many(const struct cpumask *mask,
 
 	/* Do we have another CPU which isn't us? */
 	next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
-	if (next_cpu == smp_processor_id())
+	if (next_cpu == me)
 		next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask);
 
 	/* Fastpath: do that cpu by itself. */
@@ -347,27 +351,24 @@ void smp_call_function_many(const struct cpumask *mask,
 		return;
 	}
 
-	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);

kernel/smp.c void smp_call_function_many(const struct cpumask *mask, · line 361

Quoted 10 lines
kernel/smp.c +8 -2
-		}
-		return;
+	data = kmalloc(sizeof(*data), GFP_ATOMIC);
+	if (data)
+		data->csd.flags = CSD_FLAG_ALLOC;
+	else {
+		data = &per_cpu(cfd_data, me);
+		while (data->csd.flags & CSD_FLAG_LOCK)
+			cpu_relax();
+		data->csd.flags = CSD_FLAG_LOCK;

Wont the first CPU that runs the callback unlock this? And then we run the risk of two back to back callers on the same CPU, having the second caller possibly corrupt the first.

-- Steve

Quoted 29 lines
kernel/smp.c +4 -5
 	}
 
 	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
 	if (wait)
 		data->csd.flags |= CSD_FLAG_WAIT;
 	data->csd.func = func;
 	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
+	cpumask_and(&data->cpumask, mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &data->cpumask);
+	data->refs = cpumask_weight(&data->cpumask);
 
 	spin_lock_irqsave(&call_function_lock, flags);
 	list_add_tail_rcu(&data->csd.list, &call_function_queue);
@@ -379,7 +380,7 @@ void smp_call_function_many(const struct cpumask *mask,
 	smp_mb();
 
 	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
+	arch_send_call_function_ipi_mask(&data->cpumask);
 
 	/* optionally wait for the CPUs to complete */
 	if (wait)
maintainer
#13 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 9 lines · Steven Rostedt

kernel/smp.c void smp_call_function_many(const struct cpumask *mask, · line 361

Quoted 8 lines
kernel/smp.c +8 -0
+     data = kmalloc(sizeof(*data), GFP_ATOMIC);
+     if (data)
+             data->csd.flags = CSD_FLAG_ALLOC;
+     else {
+             data = &per_cpu(cfd_data, me);
+             while (data->csd.flags & CSD_FLAG_LOCK)
+                     cpu_relax();
+             data->csd.flags = CSD_FLAG_LOCK;
Quoted 3 lines

Wont the first CPU that runs the callback unlock this? And then we run the risk of two back to back callers on the same CPU, having the second caller possibly corrupt the first.

No, there's a ref count in there that ensures the last one unlocks it.

But that's still not enough, the global queue is RCU protected.

Suppose you have 4 cpus, and use smp_function_call_mask() to 2 others, now its possible the 4th is also doing global ipis and is traversing the global queue.

Therefore, if you remove the cfd when its done, it might be the 4th cpu is in it trying to iterate to the next entry --> BANG.

The solution used is RCU freeing cfd's. This also means we have to RCU free the LOCK flag, sadly an RCU grace period is waaaay too long to spin wait on.

Hence this whole solution is not quite feasible.

There's various alternative solutions, but I'm not quite sure which makes most sense.

The one I'm currently pondering is using the global queue only for all-but-self cfd's, this matches the all-but-self ipi APIC case.

For smaller masks we could queue a csd per queue and send single ipis.

#14 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

In reply to Peter Zijlstra
Quoted 11 lines · On Thursday 12 February 2009 22:39:14 Peter Zijlstra wrote:

So it put in unconditionally, how about this?

--
Subject: generic-smp: remove single ipi fallback for smp_call_function_many()

In preparation of removing the kmalloc() calls from the generic-ipi code get rid of the single ipi fallback for smp_call_function_many().

Because we cannot get around carrying the cpumask in the data -- imagine 2 such calls with different but overlapping masks -- put in a full mask.

OK, if you really want this, please just change it to:

	unsigned long cpumask_bits[BITS_TO_LONGS(CONFIG_NR_CPUS)];

The 'struct cpumask' will be undefined soon when CONFIG_CPUMASK_OFFSTACK=y, which will prevent assignment and declaration on stack.

I'd be fascinated to see perf numbers once you kill the kmalloc. Because this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which is something we're trying to avoid unless necessary.

Thanks,
Rusty.

maintainer
#15 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 14 lines · Rusty Russell
Quoted 11 lines · On Thursday 12 February 2009 22:39:14 Peter Zijlstra wrote:

So it put in unconditionally, how about this?

--
Subject: generic-smp: remove single ipi fallback for smp_call_function_many()

In preparation of removing the kmalloc() calls from the generic-ipi code get rid of the single ipi fallback for smp_call_function_many().

Because we cannot get around carrying the cpumask in the data -- imagine 2 such calls with different but overlapping masks -- put in a full mask.

OK, if you really want this, please just change it to:

Quoted 8 lines
	unsigned long cpumask_bits[BITS_TO_LONGS(CONFIG_NR_CPUS)];

The 'struct cpumask' will be undefined soon when CONFIG_CPUMASK_OFFSTACK=y, which will prevent assignment and declaration on stack.

I'd be fascinated to see perf numbers once you kill the kmalloc. Because this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which is something we're trying to avoid unless necessary.

You're free to make it a pointer and do node affine allocations from an init section of choice and add a hotplug handler.

But I'm not quite sure how perf is affected by size overhead on ridiculous configs.

#16 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 10 lines · On Saturday 14 February 2009 10:18:05 Peter Zijlstra wrote:
Quoted 3 lines · Rusty Russell

I'd be fascinated to see perf numbers once you kill the kmalloc. Because this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which is something we're trying to avoid unless necessary.

You're free to make it a pointer and do node affine allocations from an init section of choice and add a hotplug handler.

But I'm not quite sure how perf is affected by size overhead on ridiculous configs.

No, I meant "can you actually measure the perf win of this patch?". If you did so, I missed it?

But if this patch is worthwhile, the right way to do this is make it a cpumask_var_t, and do the alloc_cpumask_var_node() in that init routine.

Thanks,
Rusty.

maintainer
#17 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 6 lines · Rusty Russell
Quoted 5 lines · On Saturday 14 February 2009 10:18:05 Peter Zijlstra wrote:
Quoted 3 lines · Rusty Russell

I'd be fascinated to see perf numbers once you kill the kmalloc. Because this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which is something we're trying to avoid unless necessary.

Quoted 8 lines
Quoted 5 lines

You're free to make it a pointer and do node affine allocations from an init section of choice and add a hotplug handler.

But I'm not quite sure how perf is affected by size overhead on ridiculous configs.

No, I meant "can you actually measure the perf win of this patch?". If you did so, I missed it?

Over what, the always single-ipi case, or the kmalloc case?

The thing is, we're removing that kmalloc because its somewhat of a wart on the whole thing.

Quoted 2 lines

But if this patch is worthwhile, the right way to do this is make it a cpumask_var_t, and do the alloc_cpumask_var_node() in that init routine.

Right, and installing a hotplug handler and ... *sigh*

#18 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

In reply to Ingo Molnar
Quoted 17 lines · Ingo Molnar
Quoted 5 lines · Peter Zijlstra
Quoted 4 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

hm, that's a complex one - we do kfree() from IPI context, [...]

Quoted 8 lines
Quoted 2 lines

The patch below might do the trick - it offloads this to a softirq. Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
Quoted 8 lines

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a performance point of view. If they are, it will all be clearly bisectable.

Ingo

Would you prefer I test this one or wait for everybody agree a final version?

Quoted 159 lines

--------------->
Subject: generic-ipi: remove kmalloc, cleanup
From: Ingo Molnar <[email protected]>

Now that we dont use the kmalloc() sequence anymore, remove CSD_FLAG_ALLOC and all its dependencies.

---
 kernel/smp.c |   86 +++++++++++------------------------------------------------
 1 file changed, 17 insertions(+), 69 deletions(-)

Index: tip/kernel/smp.c
===================================================================

kernel/smp.c +17 -69
@@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
 
 enum {
 	CSD_FLAG_WAIT		= 0x01,
-	CSD_FLAG_ALLOC		= 0x02,
-	CSD_FLAG_LOCK		= 0x04,
+	CSD_FLAG_LOCK		= 0x02,
 };
 
 struct call_function_data {
@@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
 		csd_flag_wait(data);
 }
 
-static void rcu_free_call_data(struct rcu_head *head)
-{
-	struct call_function_data *data;
-
-	data = container_of(head, struct call_function_data, rcu_head);
-
-	kfree(data);
-}
-
 /*
  * Invoked by arch to handle an IPI for call function. Must be called with
  * interrupts disabled.
@@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
 		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
-			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
 
@@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
 			} else if (data_flags & CSD_FLAG_LOCK) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_LOCK;
-			} else if (data_flags & CSD_FLAG_ALLOC)
-				kfree(data);
+			}
 		}
 		/*
 		 * See comment on outer loop
@@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
 			/*
 			 * We are calling a function on a single CPU
 			 * and we are not going to wait for it to finish.
-			 * We first try to allocate the data, but if we
-			 * fail, we fall back to use a per cpu data to pass
-			 * the information to that CPU. Since all callers
-			 * of this code will use the same data, we must
-			 * synchronize the callers to prevent a new caller
-			 * from corrupting the data before the callee
-			 * can access it.
+			 * We use a per cpu data to pass the information to
+			 * that CPU. Since all callers of this code will use
+			 * the same data, we must synchronize the callers to
+			 * prevent a new caller from corrupting the data before
+			 * the callee can access it.
 			 *
 			 * The CSD_FLAG_LOCK is used to let us know when
 			 * the IPI handler is done with the data.
@@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
-			data = NULL;
-			if (data)
-				data->flags = CSD_FLAG_ALLOC;
-			else {
-				data = &per_cpu(csd_data, me);
-				while (data->flags & CSD_FLAG_LOCK)
-					cpu_relax();
-				data->flags = CSD_FLAG_LOCK;
-			}
+			data = &per_cpu(csd_data, me);
+			while (data->flags & CSD_FLAG_LOCK)
+				cpu_relax();
+			data->flags = CSD_FLAG_LOCK;
 		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
@@ -321,8 +301,6 @@ void smp_call_function_many(const struct
 			    void (*func)(void *), void *info,
 			    bool wait)
 {
-	struct call_function_data *data;
-	unsigned long flags;
 	int cpu, next_cpu;
 
 	/* Can deadlock when called with interrupts disabled */
@@ -347,43 +325,13 @@ void smp_call_function_many(const struct
 		return;
 	}
 
-	data = NULL;
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	/* Slow path. */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		if (cpumask_test_cpu(cpu, mask))
+			smp_call_function_single(cpu, func, info, wait);
 	}
-
-	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
-	if (wait)
-		data->csd.flags |= CSD_FLAG_WAIT;
-	data->csd.func = func;
-	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
-
-	spin_lock_irqsave(&call_function_lock, flags);
-	list_add_tail_rcu(&data->csd.list, &call_function_queue);
-	spin_unlock_irqrestore(&call_function_lock, flags);
-
-	/*
-	 * Make the list addition visible before sending the ipi.
-	 */
-	smp_mb();
-
-	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
-
-	/* optionally wait for the CPUs to complete */
-	if (wait)
-		csd_flag_wait(&data->csd);
 }
 EXPORT_SYMBOL(smp_call_function_many);
 
maintainer
#19 lore raw

Re: [patch] generic-ipi: remove kmalloc, cleanup

Quoted 3 lines · Frederic Weisbecker

Would you prefer I test this one or wait for everybody agree a final version?

It'll work, but its not mergable upstream like this, it greatly pessimizes the smp_function_call() performance.

#20 lore raw

PATCH 1/1 sched: cpu hotplug fix

In reply to Ingo Molnar

The fix below addresses a lockdep warning i triggered with your config.

(You could hit this if you try to use s2ram or hibernation or explicit CPU hotplug ops.)

Ingo

-------------->
Subject: sched: cpu hotplug fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:35:40 CET 2009

rq_attach_root() does a kfree() with the runqueue lock held.

That's not a very wise move, fix it.

---
 kernel/sched.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
kernel/sched.c +12 -3
Index: tip/kernel/sched.c
===================================================================
@@ -7619,20 +7619,26 @@ static void free_rootdomain(struct root_
 
 static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 {
+	struct root_domain *old_rd = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&rq->lock, flags);
 
 	if (rq->rd) {
-		struct root_domain *old_rd = rq->rd;
+		old_rd = rq->rd;
 
 		if (cpumask_test_cpu(rq->cpu, old_rd->online))
 			set_rq_offline(rq);
 
 		cpumask_clear_cpu(rq->cpu, old_rd->span);
 
-		if (atomic_dec_and_test(&old_rd->refcount))
-			free_rootdomain(old_rd);
+		/*
+		 * If we dont want to free the old_rt yet then
+		 * set old_rd to NULL to skip the freeing later
+		 * in this function:
+		 */
+		if (!atomic_dec_and_test(&old_rd->refcount))
+			old_rd = NULL;
 	}
 
 	atomic_inc(&rd->refcount);
@@ -7643,6 +7649,9 @@ static void rq_attach_root(struct rq *rq
 		set_rq_online(rq);
 
 	spin_unlock_irqrestore(&rq->lock, flags);
+
+	if (old_rd)
+		free_rootdomain(old_rd);
 }
 
 static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
#21 lore raw

PATCH 1/1 rt: res_counter fix

In reply to Frederic Weisbecker
Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines

I get some sleep while atomic warnings.
I've put the log and my config in attachment.

Note, it's a wicked bug: I can't reproduce it anymore.
I would have been glad to give you an irqsoff trace but I can't :-)

i tried your config and after a few bootups the warning did trigger.

It's the new resource counter code. The IRQ flags disabling it does seems a bit dubious to me. Peter, what do you think?

Frederic, could you try the patch below?

Ingo

----------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

---
 kernel/res_counter.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/res_counter.c +4 -4
Index: tip/kernel/res_counter.c
===================================================================
@@ -43,7 +43,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +62,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +79,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 
#22 lore raw

PATCH 1/1 rt: res_counter fix, v2

Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

---
 kernel/res_counter.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
kernel/res_counter.c +5 -4
Index: tip/kernel/res_counter.c
===================================================================
@@ -14,6 +14,7 @@
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
+#include <linux/interrupt.h>
 
 void res_counter_init(struct res_counter *counter, struct res_counter *parent)
 {
@@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +63,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 
#23 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 43 lines · On Thu, 12 Feb 2009 11:21:13 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
Quoted 8 lines

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

I'm sorry for no knowledge about RT. Could you teach me what local_irq_save_nort() does ?

Hmm, how about just replacaing _irq() with preempt_disable()/enable() ? xxx_nort() is better ?

AFAIK, these will not be called from irq context. (Added Balbir to CC:)

Regards,
-Kame

Quoted 58 lines
---
 kernel/res_counter.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Index: tip/kernel/res_counter.c
===================================================================

kernel/res_counter.c +5 -5
@@ -14,6 +14,7 @@
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
+#include <linux/interrupt.h>
 
 void res_counter_init(struct res_counter *counter, struct res_counter *parent)
 {
@@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +63,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 
--

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#24 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 54 lines · KAMEZAWA Hiroyuki
Quoted 43 lines · On Thu, 12 Feb 2009 11:21:13 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
Quoted 8 lines

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

Quoted 7 lines

I'm sorry for no knowledge about RT. Could you teach me what local_irq_save_nort() does ?

Hmm, how about just replacaing _irq() with preempt_disable()/enable() ? xxx_nort() is better ?

AFAIK, these will not be called from irq context. (Added Balbir to CC:)

_nort() will just turn them into NOPs in essence.

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

Ingo

#25 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 63 lines · On Thu, 12 Feb 2009 12:28:54 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 60 lines · KAMEZAWA Hiroyuki
Quoted 43 lines · On Thu, 12 Feb 2009 11:21:13 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
Quoted 8 lines

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

I'm sorry for no knowledge about RT. Could you teach me what local_irq_save_nort() does ?

Hmm, how about just replacaing _irq() with preempt_disable()/enable() ? xxx_nort() is better ?

Quoted 8 lines
Quoted 1 line

AFAIK, these will not be called from irq context. (Added Balbir to CC:)

_nort() will just turn them into NOPs in essence.

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

From my point of view, No. But original design of res_coutner used irqsave/restore().

The author may think of use this function from irq-context.

But now, it seems it's better to remove them, Hmm.

Thanks,
-Kame

#26 lore raw

Re: [patch] rt: res_counter fix, v2

In reply to Ingo Molnar
Quoted 63 lines · Ingo Molnar
Quoted 60 lines · KAMEZAWA Hiroyuki
Quoted 43 lines · On Thu, 12 Feb 2009 11:21:13 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
Quoted 8 lines

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

I'm sorry for no knowledge about RT. Could you teach me what local_irq_save_nort() does ?

Hmm, how about just replacaing _irq() with preempt_disable()/enable() ? xxx_nort() is better ?

Quoted 6 lines
Quoted 1 line

AFAIK, these will not be called from irq context. (Added Balbir to CC:)

_nort() will just turn them into NOPs in essence.

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

We needed the local IRQ flags, since these counters are updated from page fault context and from reclaim context with lru_lock held with IRQ's disabled. I've been thinking about replacing the spin lock with seq lock, but have not gotten to it yet.

Signature · 1 line
	Balbir
#27 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 9 lines · Balbir Singh
Quoted 4 lines

_nort() will just turn them into NOPs in essence.

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

We needed the local IRQ flags, since these counters are updated from page fault context and from reclaim context with lru_lock held with IRQ's disabled. I've been thinking about replacing the spin lock with seq lock, but have not gotten to it yet.

Ah, in that case we can get away with _nort I think, as both those contexts are preemptable on -rt.

#28 lore raw

Re: [patch] rt: res_counter fix, v2

In reply to Balbir Singh
Quoted 7 lines · On Thu, 12 Feb 2009 22:28:33 +0530 Balbir Singh <[email protected]>…
Quoted 5 lines · Ingo Molnar
Quoted 2 lines · KAMEZAWA Hiroyuki

On Thu, 12 Feb 2009 11:21:13 +0100
Ingo Molnar <[email protected]> wrote:

Quoted 8 lines
Quoted 2 lines

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

We needed the local IRQ flags, since these counters are updated from page fault context and from reclaim context with lru_lock held with IRQ's disabled. I've been thinking about replacing the spin lock with seq lock, but have not gotten to it yet.

Hmm ? I can't understand. Why we have to disable IRQ here again ? And,
- try_to_unmap() is called in shrink_page_list(), there, no zone->lru_lock.
- page fault path doesn't hold zone->lru_lock.

My concern is only shmem. But I think it doesn't call charge() within lock, actually.

Thanks,
-Kame

#29 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 18 lines · On Fri, 13 Feb 2009 08:56:40 +0900 KAMEZAWA Hiroyuki…
Quoted 7 lines · On Thu, 12 Feb 2009 22:28:33 +0530 Balbir Singh <[email protected]>…
Quoted 5 lines · Ingo Molnar
Quoted 2 lines · KAMEZAWA Hiroyuki

On Thu, 12 Feb 2009 11:21:13 +0100
Ingo Molnar <[email protected]> wrote:

Quoted 8 lines
Quoted 2 lines

The question is, are these local IRQ flags manipulations really needed in this code, and if yes, why?

We needed the local IRQ flags, since these counters are updated from page fault context and from reclaim context with lru_lock held with IRQ's disabled. I've been thinking about replacing the spin lock with seq lock, but have not gotten to it yet.

Quoted 6 lines

Hmm ? I can't understand. Why we have to disable IRQ here again ? And,
- try_to_unmap() is called in shrink_page_list(), there, no zone->lru_lock.
- page fault path doesn't hold zone->lru_lock.

My concern is only shmem. But I think it doesn't call charge() within lock, actually

Clarification :)
res_counter_charge() is called from
- page fault
=> under down_read(mmap_sem), lock_page() may be held. IRQ=ENABLED)
- add_to_page_cache
=> under lock_page(), mapping->tree_lock is *not* held, IRQ=DISABLED
- shmem
=> info->lock is held, we use __GFP_NOWAIT here. IRQ=ENABLED
- shmem
=> info->lock is *not* held with GFP_KERNEL here, IRQ=ENABLED.
- migration
=> under lock_page() and mmap_sem, IRQ=ENABLED

res_counter_uncharge() is called from
- page_remove_rmap()//(Only when ANON)
=> anon_vma->lock and pte_lock(),lock_page() can be held. IRQ=ENABLED?
- remove_from_page_cache()
=> lock_page() and mapping->tree_lock is held, IRQ=DISABLED.

Summary:
"Charge" is considered as heavy operation and the call path is placed where the
thread can sleep, AMAP.
"Uncharge" is considered as light operation and call path is under some # of
spinlocks.

Bye,
-Kame

#30 lore raw

Re: [patch] rt: res_counter fix, v2

In reply to Ingo Molnar
Quoted 8 lines · Ingo Molnar
Quoted 1 line · Ingo Molnar

Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

Ingo

Ok, I tested it through 3 bootups and it did not triggered. But it's absolutely not a guarantee, as I said, I tried to reproduce it with several bootups yesterday and I couln't see it again.

But by reading the warning and your patch, yes it is supposed to solve it :)

BTW, a small thing:

Quoted 2 lines
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500

The reason for which I wanted to send an irqsoff trace is that the above lines are false.

addr2line -e vmlinux ffffffff8025449d /home/me/linux/rt/linux-2.6.29-rc4/kernel/fork.c:1107 (before your patch)

Which is this area in copy_process:

#ifdef CONFIG_NUMA
	p->mempolicy = mpol_dup(p->mempolicy);
 	if (IS_ERR(p->mempolicy)) {
 		retval = PTR_ERR(p->mempolicy);
 		p->mempolicy = NULL;
 		goto bad_fork_cleanup_cgroup;
 	}
	mpol_fix_fork_child_flag(p); // <-- 1107

#endif

Nothing here disables irq.
That's why I wanted to provide an irqsoff trace. But, heh I only had to read res_counter_charge() :-)

Anyway, there is a problem with these hardirqs/softirqs last disabled...

Quoted 80 lines
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot protect the c->parent linkage because local_irq_save() is only per CPU.

So replace it with _nort(). This code needs a second look.

---
 kernel/res_counter.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Index: tip/kernel/res_counter.c
===================================================================

kernel/res_counter.c +5 -4
@@ -14,6 +14,7 @@
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
+#include <linux/interrupt.h>
 
 void res_counter_init(struct res_counter *counter, struct res_counter *parent)
 {
@@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +63,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 
#31 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500

The reason for which I wanted to send an irqsoff trace is that the above lines are false.

copy_process() has:

#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;

#endif

the sequence count of 0 basically tells you it hasn't been set yet.

#32 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 21 lines · Peter Zijlstra
Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500

The reason for which I wanted to send an irqsoff trace is that the above lines are false.

copy_process() has:

#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;
Quoted 3 lines

#endif

the sequence count of 0 basically tells you it hasn't been set yet.

maybe we should initialize it to -1 to make this more apparent?

Ingo

#33 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 26 lines · Ingo Molnar
Quoted 23 lines · Peter Zijlstra
Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500

The reason for which I wanted to send an irqsoff trace is that the above lines are false.

copy_process() has:

#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;

#endif

Quoted 1 line
Quoted 1 line

the sequence count of 0 basically tells you it hasn't been set yet.

Oh I see now, thanks Peter.

Quoted 1 line

maybe we should initialize it to -1 to make this more apparent?

Or why not set p->{hard,soft}irq_disable_ip = NULL ? (or 0, I don't know its type).

Quoted 1 line

Ingo

#34 lore raw

Re: [patch] rt: res_counter fix, v2

Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines

maybe we should initialize it to -1 to make this more apparent?

Or why not set p->{hard,soft}irq_disable_ip = NULL ? (or 0, I don't know its type).

It is to reflect the actual state at copy_process(), although I think here's a little buglet:

ifdef CONFIG_TRACE_IRQFLAGS

	p->irq_events = 0;
#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
	p->hardirqs_enabled = 1;
#else
	p->hardirqs_enabled = 0;
#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;

#endif

I think the hardirq_enable/disable_ip should also depend on __ARCH_WANT_INTERRUPTS_ON_CTXSW.

#35 lore raw

Re: [patch] rt: res_counter fix, v2

In reply to Ingo Molnar
Quoted 25 lines · Ingo Molnar
Quoted 23 lines · Peter Zijlstra
Quoted 5 lines · Frederic Weisbecker
Quoted 2 lines
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500

The reason for which I wanted to send an irqsoff trace is that the above lines are false.

copy_process() has:

#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;

#endif

Quoted 3 lines
Quoted 1 line

the sequence count of 0 basically tells you it hasn't been set yet.

maybe we should initialize it to -1 to make this more apparent?

I think the current state makes sense, it reflects the actual state of copy_process.

#36 lore raw
In reply to Thomas Gleixner

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 2 lines · On Wed, 11 Feb 2009 23:43:44 +0100 (CET) Thomas Gleixner <[email protected]> wrote:

After a 1.5 years sabbatical from preempt-rt we are pleased to announce a refactored preempt-rt patch against linux-2.6.29-rc4.

Hi Thomas,

I got the following after booting on my T60:

- ------------[ cut here ]------------

WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()
Hardware name:
Modules linked in: fuse i915 drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect autofs4 coretemp sunrpc nf_conntrack_netbios_ns xt_state ipt_REJECT iptable_filter ip_tables cpufreq_ondemand dm_multipath scsi_dh uinput btusb bluetooth sg snd_hda_codec_analog snd_hda_intel snd_hda_codec iwl3945 snd_hwdep e1000e lib80211 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss video snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core thinkpad_acpi rfkill output iTCO_wdt iTCO_vendor_support button joydev hwmon dm_snapshot dm_zero dm_mirror dm_region_hash dm_log uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 9, comm: sirq-tasklet/0 Not tainted 2.6.29-rc4-rt1-tip #50
Call Trace:
 [<ffffffff8023bd23>] warn_slowpath+0xaf/0xd6
 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff802309cb>] ? enqueue_task_fair+0x25/0x68
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff80359d20>] ? setkey+0xc4/0xd8
 [<ffffffff8036426a>] ? arc4_crypt+0x0/0x5e
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff8035c8fb>] ? setkey+0xba/0xcd
 [<ffffffff8022bf8f>] ? __wake_up_common+0x49/0x7f
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff8021ce0f>] ? native_smp_send_reschedule+0x59/0x5b
 [<ffffffff8022c699>] ? resched_task+0x60/0x62
 [<ffffffff802367a9>] ? try_to_wake_up+0x352/0x364
 [<ffffffff802367ca>] ? default_wake_function+0xf/0x11
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff8024f5ce>] kthread+0x48/0x73
 [<ffffffff8020cf6a>] child_rip+0xa/0x20
 [<ffffffff8024f586>] ? kthread+0x0/0x73
 [<ffffffff8020cf60>] ? child_rip+0x0/0x20

- ---[ end trace b6a0ff9dfe960c5e ]---

It booted to runlevel 5, brought up GDM, I logged in and XFCE came up fine. It wasn't until NetworkManager started dorking around with the 802.11 adapter and started doing WEP things that I got the above warning. Right after I got this, NetworkManager connected and the system locked up. Sorry, no traceback from the panic.

I haven't gone far in looking at this, but it looks like we might have to adjust expectations in the crypto code, since it's probably ok to be in_irq() in this case, since we're actually in a kthread.

I've attached my config and the dmesg output.

Clark

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkmTj60ACgkQHyuj/+TTEp2BGwCg4hbrHeiTlnr3OoQPXiqZdVAk TqEAnjlFYKlRfNakyTVQ7X6P63dtRBaJ
=2w/c
-----END PGP SIGNATURE-----

#37 lore raw

PATCH 1/1 irq threading: fix PF_HARDIRQ definition

Quoted 58 lines · Clark Williams

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 2 lines · On Wed, 11 Feb 2009 23:43:44 +0100 (CET) Thomas Gleixner <[email protected]> wrote:

After a 1.5 years sabbatical from preempt-rt we are pleased to announce a refactored preempt-rt patch against linux-2.6.29-rc4.

Hi Thomas,

I got the following after booting on my T60:

- ------------[ cut here ]------------

WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()
Hardware name:
Modules linked in: fuse i915 drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect autofs4 coretemp sunrpc nf_conntrack_netbios_ns xt_state ipt_REJECT iptable_filter ip_tables cpufreq_ondemand dm_multipath scsi_dh uinput btusb bluetooth sg snd_hda_codec_analog snd_hda_intel snd_hda_codec iwl3945 snd_hwdep e1000e lib80211 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss video snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core thinkpad_acpi rfkill output iTCO_wdt iTCO_vendor_support button joydev hwmon dm_snapshot dm_zero dm_mirror dm_region_hash dm_log uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 9, comm: sirq-tasklet/0 Not tainted 2.6.29-rc4-rt1-tip #50
Call Trace:
 [<ffffffff8023bd23>] warn_slowpath+0xaf/0xd6
 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff802309cb>] ? enqueue_task_fair+0x25/0x68
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff80359d20>] ? setkey+0xc4/0xd8
 [<ffffffff8036426a>] ? arc4_crypt+0x0/0x5e
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff8035c8fb>] ? setkey+0xba/0xcd
 [<ffffffff8022bf8f>] ? __wake_up_common+0x49/0x7f
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff8021ce0f>] ? native_smp_send_reschedule+0x59/0x5b
 [<ffffffff8022c699>] ? resched_task+0x60/0x62
 [<ffffffff802367a9>] ? try_to_wake_up+0x352/0x364
 [<ffffffff802367ca>] ? default_wake_function+0xf/0x11
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff8024f5ce>] kthread+0x48/0x73
 [<ffffffff8020cf6a>] child_rip+0xa/0x20
 [<ffffffff8024f586>] ? kthread+0x0/0x73
 [<ffffffff8020cf60>] ? child_rip+0x0/0x20

- ---[ end trace b6a0ff9dfe960c5e ]---

It booted to runlevel 5, brought up GDM, I logged in and XFCE came up fine. It wasn't until NetworkManager started dorking around with the 802.11 adapter and started doing WEP things that I got the above warning. Right after I got this, NetworkManager connected and the system locked up. Sorry, no traceback from the panic.

Quoted 3 lines

I haven't gone far in looking at this, but it looks like we might have to adjust expectations in the crypto code, since it's probably ok to be in_irq() in this case, since we're actually in a kthread.

no, removing the warning would just hide the real bug.

Could you try the fix below please?

Ingo

--------------------------------->
Subject: irq threading: fix PF_HARDIRQ definition
From: Ingo Molnar <[email protected]>
Date: Thu Feb 12 09:29:14 CET 2009

Clark Williams reported the following warning:

  WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()

 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278

Which comes from:

        if (WARN_ON_ONCE(in_irq()))
                return -EDEADLK;

This warning is surprising, as it clearly comes from a softirq context.

The in_irq() definition looks like this on -rt:

  #define in_irq()        (hardirq_count() || (current->flags & PF_HARDIRQ))

hardirq_count() is correct, but looking at PF_HARDIRQ's definition in sched.h:

 #define PF_EXITPIDONE  0x00000008      /* pi exit done on shut down */
 #define PF_VCPU        0x00000010      /* I'm a virtual CPU */
 #define PF_HARDIRQ     0x08000020      /* hardirq context */
 #define PF_NOSCHED     0x00000020      /* Userspace does not expect scheduling */
 #define PF_FORKNOEXEC  0x00000040      /* forked but didn't exec */

Reveals that due to a typo it not only overlaps the PF_NOSCHED bit, but also has a spurious 0x08000000 component.

Move it to a free slot: 0x00000080.

---
 include/linux/sched.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/sched.h +1 -1
Index: tip/include/linux/sched.h
===================================================================
@@ -1721,9 +1721,9 @@ extern cputime_t task_gtime(struct task_
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
-#define PF_HARDIRQ	0x08000020	/* hardirq context */
 #define PF_NOSCHED	0x00000020	/* Userspace does not expect scheduling */
 #define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
+#define PF_HARDIRQ	0x00000080	/* hardirq context */
 #define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
 #define PF_DUMPCORE	0x00000200	/* dumped core */
 #define PF_SIGNALED	0x00000400	/* killed by a signal */
#38 lore raw

Re: [patch] irq threading: fix PF_HARDIRQ definition

Quoted 10 lines · Ingo Molnar

hardirq_count() is correct, but looking at PF_HARDIRQ's definition in sched.h:

 #define PF_EXITPIDONE  0x00000008      /* pi exit done on shut down */
 #define PF_VCPU        0x00000010      /* I'm a virtual CPU */
 #define PF_HARDIRQ     0x08000020      /* hardirq context */
 #define PF_NOSCHED     0x00000020      /* Userspace does not expect scheduling */
 #define PF_FORKNOEXEC  0x00000040      /* forked but didn't exec */

Reveals that due to a typo it not only overlaps the PF_NOSCHED bit, but also has a spurious 0x08000000 component.

The reason is that when we forward ported the definition, i first moved it to the 0x08000000 slot - but that slot was already taken. (our PF_ task flag space is really crowded ...)

Then i moved it to a free spot, 0x20. Or so i thought: a later -rt patch in the queue introduced PF_NOSCHED which overlapped it.

But the bigger problem was the spurious 0x08000000 component, which overlaps with:

#define PF_SOFTIRQ 0x08000000 /* softirq context */

Explaining why the warning triggered in ksoftirqd ;-)

Anyway, my fix should solve this. Do you still see the lockup under X? (make sure you also have the IPI fix applied, see the patch in this same thread.)

Ingo

#39 lore raw

Re: [patch] irq threading: fix PF_HARDIRQ definition

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 3 lines · On Thu, 12 Feb 2009 09:42:22 +0100 Ingo Molnar <[email protected]> wrote:

Anyway, my fix should solve this. Do you still see the lockup under X? (make sure you also have the IPI fix applied, see the patch in this same thread.)

That did it (the IPI patch and the redefinition). I'm up with:

$ uname -a
Linux torg 2.6.29-rc4-rt1-tip #51 SMP PREEMPT RT Thu Feb 12 09:40:06
CST 2009 x86_64 x86_64 x86_64 GNU/Linux

Thanks, I'll do some latency testing on my test boxes next...

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkmUU2gACgkQHyuj/+TTEp3c7wCgjnQuYgoLmGOmq26a2T198eh/ KdgAnjmX+cqwxYAtzaHeMH6/nO6MNuUH
=NHh/
-----END PGP SIGNATURE-----

#40 lore raw

[Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

#41 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 18 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

It fixes the rt-concerned warning I had.
Now, a new little lockdep info, tell me if you need my config, I changed it a bit:

[    0.012874] INFO: trying to register non-static key.
[    0.012940] the code is fine but needs lockdep annotation.
[    0.013008] turning off the locking correctness validator.
[    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
[    0.013917] Call Trace:
[    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
[    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
[    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
[    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
[    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
[    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
[    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
[    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
[    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
[    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
[    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
[    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
[    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
[    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
[    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
[    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
[    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
[    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
[    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71

Oh and I just tested the tracers.
It seems to run fine for all of them except sysprof.
It passes the self-test but doesn't produce any trace when I manually try.

Not completely sure this is only in -rt so I'm pulling very latest -tip and will see if I find the same problem there.

#42 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 60 lines · Frederic Weisbecker
Quoted 18 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

It fixes the rt-concerned warning I had.
Now, a new little lockdep info, tell me if you need my config, I changed it a bit:

[    0.012874] INFO: trying to register non-static key.
[    0.012940] the code is fine but needs lockdep annotation.
[    0.013008] turning off the locking correctness validator.
[    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
[    0.013917] Call Trace:
[    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
[    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
[    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
[    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
[    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
[    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
[    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
[    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
[    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
[    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
[    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
[    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
[    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
[    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
[    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
[    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
[    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
[    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
[    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71
Quoted 6 lines

Oh and I just tested the tracers.
It seems to run fine for all of them except sysprof.
It passes the self-test but doesn't produce any trace when I manually try.

Not completely sure this is only in -rt so I'm pulling very latest -tip and will see if I find the same problem there.

About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer callback is never called.

I'm digging to see what is happening.

#43 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 65 lines · Frederic Weisbecker
Quoted 64 lines · Frederic Weisbecker
Quoted 18 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

It fixes the rt-concerned warning I had.
Now, a new little lockdep info, tell me if you need my config, I changed it a bit:

[    0.012874] INFO: trying to register non-static key.
[    0.012940] the code is fine but needs lockdep annotation.
[    0.013008] turning off the locking correctness validator.
[    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
[    0.013917] Call Trace:
[    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
[    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
[    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
[    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
[    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
[    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
[    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
[    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
[    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
[    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
[    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
[    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
[    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
[    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
[    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
[    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
[    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
[    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
[    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71

Oh and I just tested the tracers.
It seems to run fine for all of them except sysprof.
It passes the self-test but doesn't produce any trace when I manually try.

Quoted 8 lines
Quoted 2 lines

Not completely sure this is only in -rt so I'm pulling very latest -tip and will see if I find the same problem there.

About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer callback is never called.

I'm digging to see what is happening.

I didn't put my ftrace_printk at the right place.
It doesn't come from hrtimer.
The problem comes from get_irq_regs() which always returns NULL on the sysprof hrtimer calback, then the trace is immediately dropped by sysprof.

That's weird, smp_apic_timer_interrupt() calls set_irq_regs() so it should find it.

Now I'm preempted by my bed.

#44 lore raw

PATCH 1/1 rt: sysprof hrtimer fix

Quoted 6 lines · Frederic Weisbecker
Quoted 6 lines
Quoted 5 lines

It seems to run fine for all of them except sysprof. It passes the self-test but doesn't produce any trace when I manually try.

Not completely sure this is only in -rt so I'm pulling very latest -tip and will see if I find the same problem there.

Quoted 8 lines
Quoted 4 lines

About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer callback is never called.

I'm digging to see what is happening.

I didn't put my ftrace_printk at the right place. It doesn't come from hrtimer. The problem comes from get_irq_regs() which always returns NULL on the sysprof hrtimer calback, then the trace is immediately dropped by sysprof.

Ah, that makes sense - under -rt the default hrtimer execution is to execute in a softirq context. Could you try the patch below please, does it fix sysprof?

Ingo

------------------>
Subject: rt: sysprof hrtimer fix
From: Ingo Molnar <[email protected]>
Date: Fri Feb 13 08:22:14 CET 2009

Frederic Weisbecker noticed that sysprof does not work under .29-rt2, and tracked it down to a NULL result that get_irq_regs() gives to the sysprof plugin.

The reason for the NULL is that it executes in the HRTIMER_SOFTIRQ context, hence it does not interrupt any real context and thus there's no IRQ registers to take a look at.

Since the sysprof functionality is atomic, the fix is to move the sysprof hrtimers to hardirq context.

---
 kernel/trace/trace_sysprof.c |    1 +
 1 file changed, 1 insertion(+)
kernel/trace/trace_sysprof.c +1 -0
Index: tip/kernel/trace/trace_sysprof.c
===================================================================
@@ -202,6 +202,7 @@ static void start_stack_timer(void *unus
 
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
+	hrtimer->irqsafe = 1;
 
 	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
 }
Tested-by on v1 1/1
#45 lore raw

Re: [patch] rt: sysprof hrtimer fix

Quoted 18 lines · Ingo Molnar
Quoted 6 lines · Frederic Weisbecker
Quoted 6 lines
Quoted 5 lines

It seems to run fine for all of them except sysprof. It passes the self-test but doesn't produce any trace when I manually try.

Not completely sure this is only in -rt so I'm pulling very latest -tip and will see if I find the same problem there.

Quoted 8 lines
Quoted 4 lines

About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer callback is never called.

I'm digging to see what is happening.

I didn't put my ftrace_printk at the right place. It doesn't come from hrtimer. The problem comes from get_irq_regs() which always returns NULL on the sysprof hrtimer calback, then the trace is immediately dropped by sysprof.

Quoted 5 lines

Ah, that makes sense - under -rt the default hrtimer execution is to execute in a softirq context. Could you try the patch below please, does it fix sysprof?

Ingo

Yes! Thanks :-)

So, just a thing.
-rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt doesn't run as a threaded interrupt, and then it is not preemptible right?

In that case, sysprof will continue to run in hardirq context, as before, and it will considerably increase the latency. And that matters here. So I think it is important to put it on the reminder:

-------------------->
Subject: [PATCH] rt: add sysprof to the latency overhead reminder
From: Frederic Weisbecker <[email protected]>

Since sysprof uses the hrtimer on hardirq with interrupts disabled, it adds a latency overhead.

Add it to the latency reminder.

---

init/main.c renamed from init/~main.c +4 -1
@@ -904,7 +904,7 @@ static int __init kernel_init(void * unu
 	WARN_ON(irqs_disabled());
 #endif
 
-#define DEBUG_COUNT (defined(CONFIG_DEBUG_RT_MUTEXES) + defined(CONFIG_IRQSOFF_TRACER) + defined(CONFIG_PREEMPT_TRACER) + defined(CONFIG_STACK_TRACER) + defined(CONFIG_WAKEUP_LATENCY_HIST) + defined(CONFIG_DEBUG_SLAB) + defined(CONFIG_DEBUG_PAGEALLOC) + defined(CONFIG_LOCKDEP) + (defined(CONFIG_FTRACE) - defined(CONFIG_FTRACE_MCOUNT_RECORD)))
+#define DEBUG_COUNT (defined(CONFIG_DEBUG_RT_MUTEXES) + defined(CONFIG_IRQSOFF_TRACER) + defined(CONFIG_PREEMPT_TRACER) + defined(CONFIG_STACK_TRACER) + defined(CONFIG_WAKEUP_LATENCY_HIST) + defined(CONFIG_DEBUG_SLAB) + defined(CONFIG_DEBUG_PAGEALLOC) + defined(CONFIG_LOCKDEP) + defined(CONFIG_SYSPROF_TRACER) + (defined(CONFIG_FTRACE) - defined(CONFIG_FTRACE_MCOUNT_RECORD)))
 
 #if DEBUG_COUNT > 0
 	printk(KERN_ERR "*****************************************************************************\n");
@@ -924,6 +924,9 @@ static int __init kernel_init(void * unu
 #ifdef CONFIG_PREEMPT_TRACER
 	printk(KERN_ERR "*        CONFIG_PREEMPT_TRACER                                              *\n");
 #endif
+#ifdef CONFIG_SYSPROF_TRACER
+	printk(KERN_ERR "*        CONFIG_SYSPROF_TRACER                                              *\n");
+#endif
 #ifdef CONFIG_FTRACE
 	printk(KERN_ERR "*        CONFIG_FTRACE                                                      *\n");
 #endif
#46 lore raw

Re: [patch] rt: sysprof hrtimer fix

Quoted 7 lines · Frederic Weisbecker

So, just a thing.
-rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt doesn't run as a threaded interrupt, and then it is not preemptible right?

In that case, sysprof will continue to run in hardirq context, as before, and it will considerably increase the latency. And that matters here. So I think it is important to put it on the reminder:

hm, not sure. Do you know it numerically how much worst-case overhead it induces?

Ingo

#47 lore raw

Re: [patch] rt: sysprof hrtimer fix

Quoted 7 lines · Ingo Molnar
Quoted 4 lines · Frederic Weisbecker

So, just a thing.
-rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt doesn't run as a threaded interrupt, and then it is not preemptible right?

Quoted 8 lines
Quoted 3 lines

In that case, sysprof will continue to run in hardirq context, as before, and it will considerably increase the latency. And that matters here. So I think it is important to put it on the reminder:

hm, not sure. Do you know it numerically how much worst-case overhead it induces?

Ingo

Not at all.
But when I find some time, I will compare some rt average tests with and without sysprof.

#48 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

Hi,

Quoted 2 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.[...]

It happens to spew a warning (see full dmesg below) and a call trace. Seems harmless otherwise, though.

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-rc4-rt2 (abuild@sovereign) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT RT 2009-02-09 18:36:31 +0100 KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x10000 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
kernel direct mapping tables up to 10000000 @ 10000-14000
RAMDISK: 0fc47000 - 0fedf746
ACPI: RSDP 000F6A30, 0024 (r2 PTLTD )
ACPI: XSDT 0FEFA146, 003C (r1 INTEL 440BX 6040000 VMW 1324272)
ACPI: FACP 0FEFEE98, 00F4 (r4 INTEL 440BX 6040000 PTL F4240)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 0FEFA22A, 4C6E (r1 PTLTD Custom 6040000 MSFT 3000001)
ACPI: FACS 0FEFFFC0, 0040
ACPI: BOOT 0FEFA202, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: APIC 0FEFA1B2, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
256MB LOWMEM available.
mapped low ram: 0 - 10000000
low ram: 00000000 - 10000000
bootmap 00010000 - 00012000
(9 early reservations) ==> bootmem [0000000000 - 0010000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005bd490] TEXT DATA BSS ==> [0000100000 - 00005bd490]
#4 [000fc47000 - 000fedf746] RAMDISK ==> [000fc47000 - 000fedf746]
#5 [00005be000 - 00005c1000] INIT_PG_TABLE ==> [00005be000 - 00005c1000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000010000 - 0000010000] PGTABLE
#8 [0000010000 - 0000012000] BOOTMAP ==> [0000010000 - 0000012000]
found SMP MP-table at [c00f6aa0] f6aa0
Zone PFN ranges:

  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00010000
  HighMem  0x00010000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0000fef0
    0: 0x0000ff00 -> 0x00010000

On node 0 totalpages: 65407
free_area_init_node: node 0, pgdat c0484280, node_mem_map c1000340
DMA zone: 52 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3931 pages, LIFO batch:0
Normal zone: 780 pages used for memmap
Normal zone: 60644 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
PM: Registered nosave memory: 00000000000cc000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 000000000fef0000 - 000000000feff000
PM: Registered nosave memory: 000000000feff000 - 000000000ff00000
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 32768 bytes of per cpu data
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64575
Kernel command line: root=/dev/sda3 rootfstype=btrfs
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:1280
PID hash table entries: 1024 (order: 10, 4096 bytes)
Extended CMOS year: 2000
TSC: Frequency read from the hypervisor
Detected 1666.800 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
allocated 1310400 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 248868k/262144k available (2232k kernel code, 12468k reserved, 1631k data, 316k init, 0k highmem) virtual kernel memory layout:

    fixmap  : 0xffe17000 - 0xfffff000   (1952 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
      .init : 0xc04cb000 - 0xc051a000   ( 316 kB)
      .data : 0xc032e359 - 0xc04c5f98   (1631 kB)
      .text : 0xc0100000 - 0xc032e359   (2232 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.60 BogoMIPS (lpj=1666800) Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code

------------[ cut here ]------------
WARNING: at mm/highmem.c:225 kmap_flush_unused+0x1d/0x2c()
Hardware name: VMware Virtual Platform
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-jen73-exp #1
Call Trace:
 [<c012b4ac>] warn_slowpath+0x71/0xa8
 [<c0116800>] ? arch_flush_lazy_cpu_mode+0x0/0x63
 [<c02b000f>] ? cpuidle_switch_governor+0xeb/0x104
 [<c02ce20f>] ? netpoll_send_skb+0xf9/0x131
 [<c02ce20f>] ? netpoll_send_skb+0xf9/0x131
 [<c010727c>] ? apply_paravirt+0x92/0xa2
 [<c018a4cb>] ? __insert_vmap_area+0x61/0x9a
 [<c018a67a>] ? alloc_vmap_area+0x176/0x180
 [<c018ab68>] ? vmap_pte_range+0xea/0x11a
 [<c018ac02>] ? vmap_page_range+0x6a/0x91
 [<c0181397>] kmap_flush_unused+0x1d/0x2c
 [<c011861f>] change_page_attr_set_clr+0xd0/0x2ca
 [<c018aa2b>] ? __vunmap+0x86/0x8e
 [<c018aa55>] ? vunmap+0x22/0x24
 [<c032b5aa>] ? text_poke+0xec/0x11a
 [<c01188e6>] set_memory_rw+0x1c/0x1e
 [<c0116edb>] free_init_pages+0x21/0x90
 [<c04d10c9>] alternative_instructions+0x100/0x10f
 [<c04d19f8>] check_bugs+0xd8/0xda
 [<c04cb83d>] start_kernel+0x2df/0x30d
 [<c04cb085>] __init_begin+0x85/0x8d
---[ end trace 4eaa2a86a8e2da22 ]---

Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) XP 2000+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (3333.60 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1100 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.1: reg 20 io port: [0x1060-0x106f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB pci 0000:00:0f.0: reg 10 io port: [0x1070-0x107f]
pci 0000:00:0f.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:0f.0: reg 18 32bit mmio: [0xe8000000-0xe87fffff]
pci 0000:00:0f.0: reg 30 32bit mmio: [0x000000-0x007fff]
pci 0000:00:10.0: reg 10 io port: [0x1080-0x10ff]
pci 0000:00:10.0: reg 14 32bit mmio: [0xe8800000-0xe8800fff]
pci 0000:00:10.0: reg 30 32bit mmio: [0x000000-0x003fff]
pci 0000:00:11.0: reg 10 64bit mmio: [0xe8801000-0xe8801fff]
pci 0000:02:00.0: reg 10 io port: [0x2000-0x207f]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:01.0: reg 10 io port: [0x2080-0x20ff]
pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:03.0: reg 10 io port: [0x2400-0x247f]
pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:04.0: reg 10 io port: [0x2480-0x24ff]
pci 0000:02:04.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:11.0: transparent bridge
pci 0000:00:11.0: bridge io port: [0x2000-0x2fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x1000-0x103f has been reserved system 00:01: ioport range 0x1040-0x104f has been reserved system 00:01: ioport range 0xcf0-0xcf1 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:00:11.0: PCI bridge, secondary bus 0000:02
pci 0000:00:11.0:   IO window: 0x2000-0x2fff
pci 0000:00:11.0:   MEM window: disabled
pci 0000:00:11.0:   PREFETCH window: 0x00000020000000-0x000000200fffff

pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0x0-0x0]
pci_bus 0000:02: resource 2 mem: [0x20000000-0x200fffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 2657k freed
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1234903163.380:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 491
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:0f.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
rpldhk 2.40, by Jan Engelhardt, 2004 - 2009
Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 Freeing unused kernel memory: 316k freed
Write protecting the kernel text: 2236k
Write protecting the kernel read-only data: 1208k
SCSI subsystem initialized
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
mptspi 0000:00:10.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 B0, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=17
scsi 0:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
scsi 0:0:1:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
scsi target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
Btrfs loaded
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1060 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1068 irq 15
ata1: port disabled. ignoring.
ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
ata2.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
udevd version 128 started
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors: (4.29 GB/4.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
sd 0:0:0:0: [sda] Cache data unavailable
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors: (4.29 GB/4.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
sd 0:0:0:0: [sda] Cache data unavailable
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 5d 00 00 00
sd 0:0:1:0: [sdb] Cache data unavailable
sd 0:0:1:0: [sdb] Assuming drive cache: write through
sd 0:0:1:0: [sdb] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 5d 00 00 00
sd 0:0:1:0: [sdb] Cache data unavailable
sd 0:0:1:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: [sdb] Attached SCSI disk
device label root devid 1 transid 1505 /dev/sda3
udevd version 128 started
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.103
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Attached scsi generic sg2 type 5
ACPI: I/O resource piix4_smbus [0x1040-0x1047] conflicts with ACPI region SMB_ [0x1040-0x104b]
ACPI: Device needs an ACPI driver
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [ACAD] (on-line)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 1x/1x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0
input: PC Speaker as /devices/platform/pcspkr/input/input3
pcnet32.c:v1.35 21.Apr.2008 [email protected]
pcnet32 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:17:8a:3c assigned IRQ 18.
eth0: registered as PCnet/PCI II 79C970A
pcnet32 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pcnet32: PCnet/PCI II 79C970A at 0x2080, 00:0c:29:17:8a:46 assigned IRQ 19.
eth1: registered as PCnet/PCI II 79C970A
pcnet32 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pcnet32: PCnet/PCI II 79C970A at 0x2400, 00:0c:29:17:8a:50 assigned IRQ 17.
eth2: registered as PCnet/PCI II 79C970A
pcnet32 0000:02:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pcnet32: PCnet/PCI II 79C970A at 0x2480, 00:0c:29:17:8a:5a assigned IRQ 18.
eth3: registered as PCnet/PCI II 79C970A
pcnet32: 4 cards_found.
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
udev: renamed network interface eth0 to mg0
udev: renamed network interface eth1 to vn5
udev: renamed network interface eth2 to vn6
udev: renamed network interface eth3 to vn7
ppdev: user-space parallel port driver
Adding 72284k swap on /dev/sda2. Priority:-1 extents:1 across:72284k
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.11)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
powernow-k8: Processor cpuid 680 not supported
mg0: link up
NET: Registered protocol family 17
vn5: link up
vn6: link up
vn7: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found

#49 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 7 lines · Jan Engelhardt

It happens to spew a warning (see full dmesg below) and a call trace. Seems harmless otherwise, though.

------------[ cut here ]------------
WARNING: at mm/highmem.c:225 kmap_flush_unused+0x1d/0x2c()
Hardware name: VMware Virtual Platform
Modules linked in:

You removed the linked in module list? Either way, I'd love to see if this happens with vanilla. Do you actually have the VMWare modules loaded?

Jon.

#50 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 5 lines · Jon Masters
Quoted 2 lines · Jan Engelhardt

It happens to spew a warning (see full dmesg below) and a call trace. Seems harmless otherwise, though.

Quoted 8 lines
Quoted 4 lines
------------[ cut here ]------------
WARNING: at mm/highmem.c:225 kmap_flush_unused+0x1d/0x2c()
Hardware name: VMware Virtual Platform
Modules linked in:

You removed the linked in module list? Either way, I'd love to see if this happens with vanilla. Do you actually have the VMWare modules loaded?

I removed nothing actually. At this point in time, there just _was_ no module loaded. This happened before initramfs even started. (You see the "unpacking initramfs... done", do you? ;-)

Jan

#51 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:

Quoted 18 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

Setting CONFIG_PERF_COUNTERS make my build, hang really early. Likely before ohci1394_dma=early stuff, because firescope doesn't seem to work.

With attached config the system boots up to the point
after /etc/rc.sysinit (this is a fedora 10 system) activates the swap. Then all I see from upstart/init is "Message from illegal source". And the system seems to stop the boot process. Strange, isn't it?

So this is what I could capture with attached config, by inserting "/bin/bash" into /etc/rc.sysinit after swap activation:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.29-rc4-rt2-tip ([email protected]) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #54 SMP PREEMPT RT Thu Feb 19 16:29:15 CET 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f0c8000 (usable)
[    0.000000]  BIOS-e820: 000000007f0c8000 - 000000007f2c9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f2c9000 - 000000007feb9000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feb9000 - 000000007feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f0c8 max_arch_pfn = 0x100000
[    0.000000] PAT not supported by CPU.
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] init_ohci1394_dma: initializing OHCI-1394 at 0c:03.0
[    0.000000] init_ohci1394_dma: finished initializing OHCI DMA
[    0.000000] RAMDISK: 7ed76000 - 7f0c775d
[    0.000000] Allocated new RAMDISK: 00dd0000 - 0112175d
[    0.000000] Move RAMDISK from 000000007ed76000 - 000000007f0c775c to 00dd0000 - 0112175c
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[    0.000000] ACPI: XSDT 7FEFD120, 0074 (r1 APPLE   Apple00       55       1000013)
[    0.000000] ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       55 Loki       5F)
[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[    0.000000] ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE  MacBookP    10001 INTL 20050309)
[    0.000000] ACPI: FACS 7FEBB000, 0040
[    0.000000] ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ASF! 7FEF7000, 009C (r32 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SSDT 7FEB6000, 064F (r1 APPLE   SataPri     1000 INTL 20050309)
[    0.000000] ACPI: SSDT 7FEB5000, 069C (r1 APPLE   SataSec     1000 INTL 20050309)
[    0.000000] ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1144MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 00000000 - 377fe000
[    0.000000]   bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000400000 - 0000dca8a0]    TEXT DATA BSS ==> [0000400000 - 0000dca8a0]
[    0.000000]   #4 [0000dcb000 - 0000dd0000]    INIT_PG_TABLE ==> [0000dcb000 - 0000dd0000]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000dd0000 - 000112175d]      NEW RAMDISK ==> [0000dd0000 - 000112175d]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f0c8
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f0c8
[    0.000000] On node 0 totalpages: 520295
[    0.000000] free_area_init_node: node 0, pgdat c0c8fb40, node_mem_map c1122000
[    0.000000]   DMA zone: 52 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 2834 pages used for memmap
[    0.000000]   Normal zone: 220396 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3721 pages used for memmap
[    0.000000]   HighMem zone: 289345 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
[    0.000000] PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[    0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513688
[    0.000000] Kernel command line: ro root=/dev/mapper/luks-sda4 panic=45 nomodeset ohci1394_dma=early vga=0x0f07 initrd=initrd-2.6.29-rc4-rt2-tip.img BOOT_IMAGE=vmlinuz-2.6.29-rc4-rt2-tip 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Preemptible RCU implementation.
[    0.000000] NR_IRQS:384
[    0.000000] CPU 0 irqstacks, hard=c0d2d000 soft=c0d29000
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1830.867 MHz processor.
[    0.003333] Console: colour VGA+ 80x60
[    0.003333] console [tty0] enabled
[    0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.003333] Memory: 2039352k/2081568k available (5824k kernel code, 40984k reserved, 3094k data, 420k init, 1172264k highmem)
[    0.003333] virtual kernel memory layout:
[    0.003333]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    0.003333]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.003333]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.003333]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.003333]       .init : 0xc0cbd000 - 0xc0d26000   ( 420 kB)
[    0.003333]       .data : 0xc09b03b2 - 0xc0cb5bc4   (3094 kB)
[    0.003333]       .text : 0xc0400000 - 0xc09b03b2   (5824 kB)
[    0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.003333] ------------[ cut here ]------------
[    0.003333] WARNING: at mm/highmem.c:225 kmap_flush_unused+0x2b/0x4b()
[    0.003333] Hardware name: MacBookPro1,1
[    0.003333] Modules linked in:
[    0.003333] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #54
[    0.003333] Call Trace:
[    0.003333]  [<c0451e70>] warn_slowpath+0x8a/0xd3
[    0.003333]  [<c043ee71>] ? kmap+0x6c/0x77
[    0.003333]  [<c04ad7f5>] ? get_page_from_freelist+0x389/0x42b
[    0.003333]  [<c04adb8f>] ? __alloc_pages_internal+0xbf/0x3a6
[    0.003333]  [<c04b9b92>] kmap_flush_unused+0x2b/0x4b
[    0.003333]  [<c043b877>] change_page_attr_set_clr+0xe8/0x2ca
[    0.003333]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[    0.003333]  [<c04bbeb3>] ? __pte_alloc_kernel+0x50/0x83
[    0.003333]  [<c043bd16>] _set_memory_uc+0x27/0x3a
[    0.003333]  [<c043ac3d>] ioremap_change_attr+0x24/0x47
[    0.003333]  [<c043ae62>] __ioremap_caller+0x202/0x256
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c043afe0>] ioremap_nocache+0x1c/0x2f
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cd0b79>] hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cc34fb>] hpet_time_init+0x16/0x37
[    0.003333]  [<c0cbd997>] start_kernel+0x289/0x345
[    0.003333]  [<c0cbd093>] __init_begin+0x93/0xac
[    0.003333] ---[ end trace a7919e7f17c0a725 ]---
[    0.003333] hpet clockevent registered
[    0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3663.30 BogoMIPS (lpj=6102890)
[    0.003756] Security Framework initialized
[    0.003926] SELinux:  Initializing.
[    0.004114] SELinux:  Starting in permissive mode
[    0.004144] Mount-cache hash table entries: 512
[    0.006815] Initializing cgroup subsys ns
[    0.006985] Initializing cgroup subsys cpuacct
[    0.007155] Initializing cgroup subsys net_cls
[    0.007345] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.007614] CPU: L2 cache: 2048K
[    0.007780] CPU: Physical Processor ID: 0
[    0.007946] CPU: Processor Core ID: 0
[    0.008112] CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
[    0.008287] Intel machine check architecture supported.
[    0.008458] Intel machine check reporting enabled on CPU#0.
[    0.008638] Checking 'hlt' instruction... OK.
[    0.023772] ACPI: Core revision 20081204
[    0.037149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072745] CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.073332] CPU 1 irqstacks, hard=c0d2e000 soft=c0d2a000
[    0.073332] Booting processor 1 APIC 0x1 ip 0x6000
[    0.073332] Initializing CPU#1
[    0.073332] Calibrating delay using timer specific routine.. 3663.33 BogoMIPS (lpj=6102937)
[    0.073332] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.073332] CPU: L2 cache: 2048K
[    0.073332] CPU: Physical Processor ID: 0
[    0.073332] CPU: Processor Core ID: 1
[    0.073332] CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
[    0.073332] Intel machine check architecture supported.
[    0.073332] Intel machine check reporting enabled on CPU#1.
[    0.163791] CPU1: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.165743] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.166729] Brought up 2 CPUs
[    0.166894] Total of 2 processors activated (7326.64 BogoMIPS).
[    0.167117] CPU0 attaching sched-domain:
[    0.167120]  domain 0: span 0-1 level MC
[    0.167123]   groups: 0 1
[    0.167129] CPU1 attaching sched-domain:
[    0.167131]  domain 0: span 0-1 level MC
[    0.167134]   groups: 1 0
[    0.176788] net_namespace: 1108 bytes
[    0.177292] NET: Registered protocol family 16
[    0.177292] ACPI: bus type pci registered
[    0.177292] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.177292] PCI: MCFG area at e0000000 reserved in E820
[    0.177292] PCI: Using MMCONFIG for extended config space
[    0.177292] PCI: Using configuration type 1 for base access
[    0.190078] bio: create slab <bio-0> at 0
[    0.190879] ACPI: EC: EC description table is found, configuring boot EC
[    0.193395] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.196875] ACPI: BIOS _OSI(Linux) query ignored
[    0.200196] ACPI: Interpreter enabled
[    0.200366] ACPI: (supports S0 S3 S4 S5)
[    0.200963] ACPI: Using IOAPIC for interrupt routing
[    0.220171] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.220333] ACPI: EC: driver started in interrupt mode
[    0.220531] ACPI: No dock devices found.
[    0.220625] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.220843] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.220843] pci 0000:00:01.0: PME# disabled
[    0.220843] pci 0000:00:07.0: reg 10 32bit mmio: [0x90404000-0x90404fff]
[    0.220843] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90400000-0x90403fff]
[    0.220843] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.220843] pci 0000:00:1b.0: PME# disabled
[    0.221091] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.221264] pci 0000:00:1c.0: PME# disabled
[    0.221519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.221694] pci 0000:00:1c.1: PME# disabled
[    0.221948] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.222122] pci 0000:00:1c.2: PME# disabled
[    0.222354] pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
[    0.222420] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[    0.222486] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
[    0.222552] pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
[    0.222621] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90405400-0x904057ff]
[    0.222688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.222863] pci 0000:00:1d.7: PME# disabled
[    0.223206] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.223524] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.223700] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[    0.223934] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.224167] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
[    0.224402] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[    0.224688] pci 0000:00:1f.1: reg 10 io port: [0x40e8-0x40ef]
[    0.224697] pci 0000:00:1f.1: reg 14 io port: [0x40fc-0x40ff]
[    0.224705] pci 0000:00:1f.1: reg 18 io port: [0x40e0-0x40e7]
[    0.224714] pci 0000:00:1f.1: reg 1c io port: [0x40f8-0x40fb]
[    0.224723] pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
[    0.224780] pci 0000:00:1f.2: reg 10 io port: [0x40d8-0x40df]
[    0.224789] pci 0000:00:1f.2: reg 14 io port: [0x40f4-0x40f7]
[    0.224797] pci 0000:00:1f.2: reg 18 io port: [0x40d0-0x40d7]
[    0.224806] pci 0000:00:1f.2: reg 1c io port: [0x40f0-0x40f3]
[    0.224815] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x402f]
[    0.224823] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90405000-0x904053ff]
[    0.224855] pci 0000:00:1f.2: PME# supported from D3hot
[    0.225028] pci 0000:00:1f.2: PME# disabled
[    0.225256] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[    0.225345] pci 0000:01:00.0: reg 10 32bit mmio: [0x80000000-0x87ffffff]
[    0.225357] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[    0.225368] pci 0000:01:00.0: reg 18 32bit mmio: [0x90300000-0x9030ffff]
[    0.225399] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.225442] pci 0000:01:00.0: supports D1 D2
[    0.225475] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.225799] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[    0.225803] pci 0000:00:01.0: bridge 32bit mmio: [0x90300000-0x903fffff]
[    0.225809] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x87ffffff]
[    0.225891] pci 0000:02:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
[    0.225903] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.225939] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.225996] pci 0000:02:00.0: supports D1 D2
[    0.225998] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.226094] pci 0000:02:00.0: PME# disabled
[    0.226213] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.226464] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.226470] pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
[    0.226557] pci 0000:03:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
[    0.226753] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.226999] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
[    0.227066] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[    0.227072] pci 0000:00:1c.2: bridge 32bit mmio: [0x8c100000-0x900fffff]
[    0.227081] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x88000000-0x8bffffff]
[    0.227133] pci 0000:0c:03.0: reg 10 32bit mmio: [0x8c000000-0x8c000fff]
[    0.227197] pci 0000:0c:03.0: supports D1 D2
[    0.227200] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[    0.227292] pci 0000:0c:03.0: PME# disabled
[    0.227436] pci 0000:00:1e.0: transparent bridge
[    0.227529] pci 0000:00:1e.0: bridge 32bit mmio: [0x8c000000-0x8c0fffff]
[    0.227566] pci_bus 0000:00: on NUMA node 0
[    0.227575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.227879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.227996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.228111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.228223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.228349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.240585] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.240870] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.241678] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.242559] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.243400] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.244331] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.245260] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.250158] SCSI subsystem initialized
[    0.250158] libata version 3.00 loaded.
[    0.250158] usbcore: registered new interface driver usbfs
[    0.250158] usbcore: registered new interface driver hub
[    0.250158] usbcore: registered new device driver usb
[    0.250158] ACPI: WMI: Mapper loaded
[    0.250158] PCI: Using ACPI for IRQ routing
[    0.260027] NET: Registered protocol family 23
[    0.260149] Bluetooth: Core ver 2.14
[    0.260252] NET: Registered protocol family 31
[    0.260252] Bluetooth: HCI device and connection manager initialized
[    0.260252] Bluetooth: HCI socket layer initialized
[    0.260272] NetLabel: Initializing
[    0.260355] NetLabel:  domain hash size = 128
[    0.260440] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260544] NetLabel:  unlabeled traffic allowed by default
[    0.263356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.263629] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.282737] pnp: PnP ACPI init
[    0.282832] ACPI: bus type pnp registered
[    0.285482] pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
[    0.293917] pnp: PnP ACPI: found 10 devices
[    0.294004] ACPI: ACPI bus type pnp unregistered
[    0.294102] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.294195] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.294289] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.294382] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.294476] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.294569] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.294669] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.294767] system 00:08: ioport range 0x680-0x6ef has been reserved
[    0.294860] system 00:08: ioport range 0x800-0x80f has been reserved
[    0.294952] system 00:08: ioport range 0x810-0x817 has been reserved
[    0.295044] system 00:08: ioport range 0x400-0x47f has been reserved
[    0.295137] system 00:08: ioport range 0x500-0x53f has been reserved
[    0.330478] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.330569] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    0.330659] pci 0000:00:01.0:   MEM window: 0x90300000-0x903fffff
[    0.330751] pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000087ffffff
[    0.330874] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.330965] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.331057] pci 0000:00:1c.0:   MEM window: 0x90200000-0x902fffff
[    0.331150] pci 0000:00:1c.0:   PREFETCH window: 0x00000090500000-0x000000905fffff
[    0.333170] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.333259] pci 0000:00:1c.1:   IO window: disabled
[    0.333383] pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
[    0.333477] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.333570] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.333662] pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
[    0.333755] pci 0000:00:1c.2:   MEM window: 0x8c100000-0x900fffff
[    0.333848] pci 0000:00:1c.2:   PREFETCH window: 0x00000088000000-0x0000008bffffff
[    0.333975] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[    0.334066] pci 0000:00:1e.0:   IO window: disabled
[    0.334158] pci 0000:00:1e.0:   MEM window: 0x8c000000-0x8c0fffff
[    0.334251] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.334355] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.334449] pci 0000:00:01.0: setting latency timer to 64
[    0.334460] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.334555] pci 0000:00:1c.0: setting latency timer to 64
[    0.334565] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.334660] pci 0000:00:1c.1: setting latency timer to 64
[    0.334671] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.334765] pci 0000:00:1c.2: setting latency timer to 64
[    0.334861] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.334955] pci 0000:00:1e.0: setting latency timer to 64
[    0.334961] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.334964] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.334967] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.334970] pci_bus 0000:01: resource 1 mem: [0x90300000-0x903fffff]
[    0.334973] pci_bus 0000:01: resource 2 mem: [0x80000000-0x87ffffff]
[    0.334976] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[    0.334979] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.334982] pci_bus 0000:02: resource 1 mem: [0x90200000-0x902fffff]
[    0.334985] pci_bus 0000:02: resource 2 mem: [0x90500000-0x905fffff]
[    0.334988] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[    0.334991] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[    0.334993] pci_bus 0000:03: resource 1 mem: [0x90100000-0x901fffff]
[    0.334996] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[    0.334999] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[    0.335002] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
[    0.335005] pci_bus 0000:04: resource 1 mem: [0x8c100000-0x900fffff]
[    0.335008] pci_bus 0000:04: resource 2 mem: [0x88000000-0x8bffffff]
[    0.335011] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[    0.335013] pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
[    0.335016] pci_bus 0000:0c: resource 1 mem: [0x8c000000-0x8c0fffff]
[    0.335019] pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
[    0.335022] pci_bus 0000:0c: resource 3 io:  [0x00-0xffff]
[    0.335025] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[    0.335086] NET: Registered protocol family 2
[    0.393427] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.393929] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.394739] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.396029] TCP: Hash tables configured (established 131072 bind 65536)
[    0.396125] TCP reno registered
[    0.413478] NET: Registered protocol family 1
[    0.413752] checking if image is initramfs... it is
[    0.690538] Freeing initrd memory: 3397k freed
[    0.692982] Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.693700] audit: initializing netlink socket (disabled)
[    0.693806] type=2000 audit(1235070753.690:1): initialized
[    0.698609] highmem bounce pool size: 64 pages
[    0.698699] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.703396] VFS: Disk quotas dquot_6.5.2
[    0.703527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.704047] NTFS driver 2.1.29 [Flags: R/O].
[    0.704175] fuse init (API version 7.11)
[    0.704404] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.708367] msgmni has been set to 1701
[    0.708594] SELinux:  Registering netfilter hooks
[    0.708782] alg: No test for cipher_null (cipher_null-generic)
[    0.708971] alg: No test for digest_null (digest_null-generic)
[    0.709103] alg: No test for compress_null (compress_null-generic)
[    0.710693] alg: No test for fcrypt (fcrypt-generic)
[    0.713278] alg: No test for stdrng (krng)
[    0.713528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.713650] io scheduler noop registered
[    0.713735] io scheduler anticipatory registered
[    0.713821] io scheduler deadline registered
[    0.713928] io scheduler cfq registered (default)
[    0.714254] pci 0000:01:00.0: Boot video device
[    0.714420] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.714479] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.714666] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.714748] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.715023] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.715104] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.715375] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.715456] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.715843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.716868] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[    0.717121] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
[    0.717147] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[    0.717389] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded
[    0.717416] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
[    0.717687] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
[    0.717746] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.717838] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.725297] decode_hpp: Could not get hotplug parameters. Use defaults
[    0.725442] acpiphp_glue: Slot 3 already registered by another hotplug driver
[    0.733389] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    0.733480] fakephp: Fake PCI Hot Plug Controller Driver
[    0.734135] fakephp: pci_hp_register failed with error -16
[    0.734227] fakephp: pci_hp_register failed with error -16
[    0.734764] ACPI: AC Adapter [ADP1] (on-line)
[    0.930439] ACPI: Battery Slot [BAT0] (battery present)
[    0.930739] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.930861] ACPI: Power Button (FF) [PWRF]
[    0.931071] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.931250] ACPI: Lid Switch [LID0]
[    0.931453] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.931576] ACPI: Power Button (CM) [PWRB]
[    0.931780] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.931903] ACPI: Sleep Button (CM) [SLPB]
[    0.933001] ACPI: SSDT 7FEB3C90, 022A (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
[    0.933630] ACPI: SSDT 7FEB2C10, 02C3 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
[    0.934333] Monitor-Mwait will be used to enter C-1 state
[    0.934349] Monitor-Mwait will be used to enter C-2 state
[    0.934363] Monitor-Mwait will be used to enter C-3 state
[    0.934449] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.934819] processor ACPI_CPU:00: registered as cooling_device0
[    0.934913] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.935571] ACPI: SSDT 7FEB3F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
[    0.936172] ACPI: SSDT 7FEB2F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
[    0.937013] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.937373] processor ACPI_CPU:01: registered as cooling_device1
[    0.937466] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.994749] Non-volatile memory driver v1.3
[    0.995018] intel_rng: FWH not detected
[    0.995140] Linux agpgart interface v0.103
[    0.995389] ipmi message handler version 39.2
[    0.995480] ipmi device interface
[    0.995685] IPMI System Interface driver.
[    1.114316] ipmi_si: Unable to find any System Interface(s)
[    1.114408] IPMI Watchdog: driver initialized
[    1.114493] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    1.114625] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[    1.114748] Hangcheck: Using get_cycles().
[    1.114846] tpm_inf_pnp 00:03: Found TPM with ID IFX0101
[    1.114984] tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[    1.115397] [drm] Initialized drm 1.1.0 20060810
[    1.116200] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.116294] pci 0000:01:00.0: setting latency timer to 64
[    1.116452] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[    1.119306] brd: module loaded
[    1.120676] loop: module loaded
[    1.120922] sky2 driver version 1.22
[    1.121037] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.121136] sky2 0000:02:00.0: setting latency timer to 64
[    1.121162] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    1.153463] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
[    1.153583]  Part Number: Yukon 88E8053
[    1.153585]  Engineering Level: Rev. 2.2
[    1.153587]  Manufacturer: Marvell
[    1.153661] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    1.154147] sky2 eth0: addr 00:16:cb:8c:b2:65
[    1.154332] PPP generic driver version 2.4.2
[    1.154575] PPP Deflate Compression module registered
[    1.155851] PPP MPPE Compression module registered
[    1.155940] NET: Registered protocol family 24
[    1.156037] PPPoL2TP kernel driver, V1.0
[    1.157239] tun: Universal TUN/TAP device driver, 1.6
[    1.157327] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.157561] usbcore: registered new interface driver cdc_ether
[    1.157714] usbcore: registered new interface driver rndis_host
[    1.157872] usbcore: registered new interface driver rndis_wlan
[    1.157987] console [netcon0] enabled
[    1.158071] netconsole: network logging started
[    1.158157] Linux video capture interface: v2.00
[    1.158403] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.158825] Driver 'sd' needs updating - please use bus_type methods
[    1.158973] Driver 'sr' needs updating - please use bus_type methods
[    1.159175] SCSI Media Changer driver v0.25 
[    1.159317] Driver 'ch' needs updating - please use bus_type methods
[    1.159564] ata_piix 0000:00:1f.1: version 2.12
[    1.159651] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    1.159748] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.159884] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.160061] scsi0 : ata_piix
[    1.162244] scsi1 : ata_piix
[    1.163163] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[    1.163257] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[    1.323941] ata1.00: ATAPI: MATSHITADVD-R   UJ-857, HAEA, max UDMA/66
[    1.337231] ata1.00: configured for UDMA/66
[    1.339235] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857   HAEA PQ: 0 ANSI: 5
[    1.341093] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.341186] Uniform CD-ROM driver Revision: 3.20
[    1.341532] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.341701] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.504627] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[    1.504725] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.504821] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    1.656694] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.656805] scsi2 : ata_piix
[    1.657075] scsi3 : ata_piix
[    1.658636] ata3: SATA max UDMA/133 cmd 0x40d8 ctl 0x40f4 bmdma 0x4020 irq 19
[    1.658731] ata4: SATA max UDMA/133 cmd 0x40d0 ctl 0x40f0 bmdma 0x4028 irq 19
[    2.157997] ata3.01: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133
[    2.158091] ata3.01: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    2.210562] ata3.01: configured for UDMA/133
[    2.223429] scsi 2:0:1:0: Direct-Access     ATA      WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
[    2.223834] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.223975] sd 2:0:1:0: [sda] Write Protect is off
[    2.224063] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.224102] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.224303] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.224443] sd 2:0:1:0: [sda] Write Protect is off
[    2.224531] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.224569] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.224694]  sda: sda1 sda2 sda3 sda4 sda5
[    2.272393] sd 2:0:1:0: [sda] Attached SCSI disk
[    2.272641] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    2.434835] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.500019] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.0
[    2.500420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.500533] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.500637] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.500642] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.500923] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.504950] ehci_hcd 0000:00:1d.7: debug port 1
[    2.505042] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.505101] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90405400
[    2.516683] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.516805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.516898] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.517017] usb usb1: Product: EHCI Host Controller
[    2.517104] usb usb1: Manufacturer: Linux 2.6.29-rc4-rt2-tip ehci_hcd
[    2.517195] usb usb1: SerialNumber: 0000:00:1d.7
[    2.517413] usb usb1: configuration #1 chosen from 1 choice
[    2.517600] hub 1-0:1.0: USB hub found
[    2.517693] hub 1-0:1.0: 8 ports detected
[    2.518169] uhci_hcd: USB Universal Host Controller Interface driver
[    2.518293] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.518391] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.518396] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.518668] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.518818] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[    2.518949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.519042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.519161] usb usb2: Product: UHCI Host Controller
[    2.519249] usb usb2: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.519341] usb usb2: SerialNumber: 0000:00:1d.0
[    2.519550] usb usb2: configuration #1 chosen from 1 choice
[    2.519743] hub 2-0:1.0: USB hub found
[    2.519834] hub 2-0:1.0: 2 ports detected
[    2.520153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.520252] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.520256] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.520528] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.520680] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[    2.520816] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.520909] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.521030] usb usb3: Product: UHCI Host Controller
[    2.521117] usb usb3: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.521208] usb usb3: SerialNumber: 0000:00:1d.1
[    2.521413] usb usb3: configuration #1 chosen from 1 choice
[    2.521600] hub 3-0:1.0: USB hub found
[    2.521694] hub 3-0:1.0: 2 ports detected
[    2.522005] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.522104] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.522108] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.522384] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.522578] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    2.522708] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.522800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.522920] usb usb4: Product: UHCI Host Controller
[    2.523006] usb usb4: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.523097] usb usb4: SerialNumber: 0000:00:1d.2
[    2.523296] usb usb4: configuration #1 chosen from 1 choice
[    2.523486] hub 4-0:1.0: USB hub found
[    2.523578] hub 4-0:1.0: 2 ports detected
[    2.523859] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.523956] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.523960] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.524212] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.524406] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[    2.524543] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.524635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.524754] usb usb5: Product: UHCI Host Controller
[    2.524841] usb usb5: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.524932] usb usb5: SerialNumber: 0000:00:1d.3
[    2.525126] usb usb5: configuration #1 chosen from 1 choice
[    2.525293] hub 5-0:1.0: USB hub found
[    2.525384] hub 5-0:1.0: 2 ports detected
[    2.525796] usbcore: registered new interface driver cdc_acm
[    2.525888] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.526075] usbcore: registered new interface driver usblp
[    2.526165] Initializing USB Mass Storage driver...
[    2.526344] usbcore: registered new interface driver usb-storage
[    2.526435] USB Mass Storage support registered.
[    2.526621] usbcore: registered new interface driver appledisplay
[    2.526994] PNP: No PS/2 controller found. Probing ports directly.
[    2.527968] i8042.c: No controller found.
[    2.540928] mice: PS/2 mouse device common for all mice
[    2.616918] usbcore: registered new interface driver appletouch
[    2.617086] usbcore: registered new interface driver bcm5974
[    2.617294] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.644324] I2O subsystem v1.325
[    2.644408] i2o: max drivers = 8
[    2.650182] I2O Configuration OSM v1.323
[    2.650406] I2O Bus Adapter OSM v1.317
[    2.650562] I2O Block Device OSM v1.325
[    2.653445] I2O SCSI Peripheral OSM v1.316
[    2.653594] I2O ProcFS OSM v1.316
[    2.653780] rtc_cmos 00:09: RTC can wake from S4
[    2.653960] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    2.654116] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.654271] i2c /dev entries driver
[    2.654504] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.654626] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
[    2.654751] ACPI: Device needs an ACPI driver
[    2.655221] applesmc: Apple MacBook Pro detected:
[    2.655308] applesmc:  - Model with accelerometer
[    2.657299] applesmc:  - Model with light sensors and backlight
[    2.657389] applesmc:  - Model with 12 temperature sensors
[    2.658238] applesmc: device has already been initialized (0xe0, 0x00).
[    2.658241] applesmc: device successfully initialized.
[    2.659135] applesmc: 2 fans found.
[    2.660831] input: applesmc as /devices/platform/applesmc.768/input/input6
[    2.690200] Registered led device: smc::kbd_backlight
[    2.690363] applesmc: driver successfully loaded.
[    2.690829] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[    2.691094] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[    2.691310] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.691449] device-mapper: uevent: version 1.0.3
[    2.691657] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[    2.700091] device-mapper: multipath: version 1.0.5 loaded
[    2.700181] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.700346] Bluetooth: Generic Bluetooth USB driver ver 0.4
[    2.700511] usbcore: registered new interface driver btusb
[    2.703900] cpuidle: using governor ladder
[    2.704992] cpuidle: using governor menu
[    2.705263] Marking TSC unstable due to TSC halts in idle
[    2.706596] usbcore: registered new interface driver usbhid
[    2.706710] usbhid: v2.6:USB HID core driver
[    2.707034] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[    2.708678] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.708884] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    2.738942] hda_codec: STAC922x, Apple subsys_id=106b0200
[    2.774442] input: HDA Intel at 0x90400000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7
[    2.793824] input: HDA Intel at 0x90400000 irq 22 HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8
[    2.801749] ALSA device list:
[    2.801834]   #0: Dummy 1
[    2.801914]   #1: Virtual MIDI Card 1
[    2.801999]   #2: HDA Intel at 0x90400000 irq 22
[    2.802226] oprofile: using NMI interrupt.
[    2.802350] GACT probability on
[    2.802434] Mirror/redirect action on
[    2.802518] Simple TC action Loaded
[    2.803038] netem: version 1.2
[    2.803122] u32 classifier
[    2.803203]     Performance counters on
[    2.803286]     input device check on 
[    2.803392]     Actions configured 
[    2.804015] IPv4 over IPv4 tunneling driver
[    2.804578] GRE over IPv4 tunneling driver
[    2.805188] TCP cubic registered
[    2.805272] Initializing XFRM netlink socket
[    2.805428] NET: Registered protocol family 10
[    2.806279] lo: Disabled Privacy Extensions
[    2.809108] tunl0: Disabled Privacy Extensions
[    2.810486] NET: Registered protocol family 17
[    2.810579] NET: Registered protocol family 15
[    2.810747] Bridge firewalling registered
[    2.810863] irlan0 (): not using net_device_ops yet
[    2.812234] IrCOMM protocol (Dag Brattli)
[    2.814862] Bluetooth: L2CAP ver 2.11
[    2.814947] Bluetooth: L2CAP socket layer initialized
[    2.815036] Bluetooth: SCO (Voice Link) ver 0.6
[    2.815122] Bluetooth: SCO socket layer initialized
[    2.815268] Bluetooth: RFCOMM socket layer initialized
[    2.815362] Bluetooth: RFCOMM TTY layer initialized
[    2.815450] Bluetooth: RFCOMM ver 1.10
[    2.815534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.815623] Bluetooth: BNEP filters: protocol multicast
[    2.815712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.815883] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[    2.815976] All bugs added by David S. Miller <[email protected]>
[    2.820471] CCID: Activated CCID 2 (TCP-like)
[    2.820588] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[    2.830366] SCTP: Hash tables configured (established 52428 bind 65536)
[    2.847663] lib80211: common routines for IEEE802.11 drivers
[    2.847773] lib80211_crypt: registered algorithm 'NULL'
[    2.847779] TIPC: Activated (version 1.6.4 compiled Feb 19 2009 16:57:08)
[    2.848303] NET: Registered protocol family 30
[    2.848392] TIPC: Started in single node mode
[    2.848479] Using IPI No-Shortcut mode
[    2.852277] registered taskstats version 1
[    2.852575] rtc_cmos 00:09: setting system clock to 2009-02-19 19:12:36 UTC (1235070756)
[    2.852698] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[    2.853227] Freeing unused kernel memory: 420k freed
[    2.853406] Write protecting the kernel text: 5828k
[    2.853607] Write protecting the kernel read-only data: 2500k
[    2.930078] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    3.000385] firewire_core: created device fw0: GUID 0016cbfffe4c8a54, S400
[    3.056174] usb 1-3: New USB device found, idVendor=090c, idProduct=1000
[    3.056288] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.056402] usb 1-3: Product: Flash Voyager
[    3.056503] usb 1-3: Manufacturer: Corsair
[    3.056602] usb 1-3: SerialNumber: A400000000028713
[    3.056880] usb 1-3: configuration #1 chosen from 1 choice
[    3.057694] scsi4 : SCSI emulation for USB Mass Storage devices
[    3.058040] usb-storage: device found at 3
[    3.058043] usb-storage: waiting for device to settle before scanning
[    3.163409] usb 1-4: new high speed USB device using ehci_hcd and address 4
[    3.287174] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
[    3.287289] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.287643] usb 1-4: configuration #1 chosen from 1 choice
[    3.726729] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    3.905036] usb 2-2: New USB device found, idVendor=05ac, idProduct=0218
[    3.905180] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.905293] usb 2-2: Product: Apple Internal Keyboard / Trackpad
[    3.905410] usb 2-2: Manufacturer: Apple Computer
[    3.905599] usb 2-2: configuration #1 chosen from 1 choice
[    3.913573] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input9
[    3.934384] apple 0003:05AC:0218.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[    3.939034] appletouch: Geyser mode initialized.
[    3.939256] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input10
[    3.970172] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input11
[    3.991080] apple 0003:05AC:0218.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[    4.000097] Clocksource tsc unstable (delta = -277709176 ns)
[    4.216788] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    4.388806] usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
[    4.388920] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.389033] usb 4-2: Product: IR Receiver
[    4.389132] usb 4-2: Manufacturer: Apple Computer, Inc.
[    4.389304] usb 4-2: configuration #1 chosen from 1 choice
[    4.396877] generic-usb 0003:05AC:8240.0003: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    4.623456] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    4.793665] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
[    4.793778] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.793950] usb 5-1: configuration #1 chosen from 1 choice
[    4.814124] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input12
[    4.834332] generic-usb 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[    4.850127] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input13
[    4.871070] generic-usb 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[    8.057172] usb-storage: device scan complete
[    8.058235] scsi 4:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
[    8.059814] sd 4:0:0:0: [sdb] 7929856 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[    8.060721] sd 4:0:0:0: [sdb] Write Protect is off
[    8.060833] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.060836] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.063853] sd 4:0:0:0: [sdb] 7929856 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[    8.064826] sd 4:0:0:0: [sdb] Write Protect is off
[    8.064932] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.064937] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.065050]  sdb: sdb1
[    8.066233] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    8.066398] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   13.169831] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   13.169957] in_atomic(): 0, irqs_disabled(): 1, pid: 1030, name: cryptsetup
[   13.170075] Pid: 1030, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   13.170196] Call Trace:
[   13.170284]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   13.170374]  [<c043ee55>] kmap+0x50/0x77
[   13.170460]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   13.170548]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   13.170639]  [<c04f75f1>] dio_get_page+0x59/0x124
[   13.170729]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   13.170819]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   13.170837]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   13.170837]  [<c05ff445>] ? avc_has_perm+0x56/0x71
[   13.170837]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   13.170837]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   13.170837]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
[   13.170837]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   13.170837]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   13.170837]  [<c04d1b61>] vfs_read+0x99/0x14e
[   13.170837]  [<c04d1cf7>] sys_read+0x50/0x87
[   13.170837]  [<c0420086>] sysenter_do_call+0x12/0x21
[   14.796047] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   14.796177] in_atomic(): 0, irqs_disabled(): 1, pid: 1045, name: cryptsetup
[   14.796273] Pid: 1045, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   14.796394] Call Trace:
[   14.796485]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   14.796573]  [<c043ee55>] kmap+0x50/0x77
[   14.796660]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   14.796671]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   14.796671]  [<c04f75f1>] dio_get_page+0x59/0x124
[   14.796671]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   14.796671]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   14.796671]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   14.796671]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   14.796671]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   14.796671]  [<c05ff445>] ? avc_has_perm+0x56/0x71
[   14.796671]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   14.796671]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   14.796671]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
[   14.796671]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   14.796671]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   14.796671]  [<c04d1b61>] vfs_read+0x99/0x14e
[   14.796671]  [<c04d1cf7>] sys_read+0x50/0x87
[   14.796671]  [<c0420086>] sysenter_do_call+0x12/0x21
[   17.837434] EXT3-fs: mounted filesystem with ordered data mode.
[   17.837844] kjournald starting.  Commit interval 5 seconds
[   17.966524] SELinux:  Disabled at runtime.
[   17.966629] SELinux:  Unregistering netfilter hooks
[   18.056792] type=1404 audit(1235070771.704:2): selinux=0 auid=4294967295 ses=4294967295
[   21.276574] udevd version 127 started
[   21.795981] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   21.795986] in_atomic(): 0, irqs_disabled(): 1, pid: 1374, name: cdrom_id
[   21.795990] Pid: 1374, comm: cdrom_id Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   21.795993] Call Trace:
[   21.796003]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   21.796007]  [<c043ee55>] kmap+0x50/0x77
[   21.796011]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   21.796015]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   21.796020]  [<c04f5505>] bio_map_user_iov+0x120/0x220
[   21.796024]  [<c04f5631>] bio_map_user+0x2c/0x42
[   21.796029]  [<c064fe04>] blk_rq_map_user+0xe2/0x1f2
[   21.796034]  [<c045a6ad>] ? capable+0x2d/0x5a
[   21.796039]  [<c065344a>] sg_io+0x1d5/0x32d
[   21.796045]  [<c04cd348>] ? kfree+0x84/0x9a
[   21.796049]  [<c0653adb>] scsi_cmd_ioctl+0x24f/0x4a4
[   21.796054]  [<c078f6ed>] ? cdrom_open+0x84b/0x8c3
[   21.796058]  [<c04f52a1>] ? bio_add_page+0x38/0x50
[   21.796062]  [<c078e185>] cdrom_ioctl+0x3e/0xd5b
[   21.796066]  [<c0444e4e>] ? update_curr+0x9c/0x1b7
[   21.796072]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[   21.796077]  [<c04b94fe>] ? page_address+0x95/0xcb
[   21.796082]  [<c0765f9e>] sr_block_ioctl+0x4f/0x94
[   21.796086]  [<c065107d>] __blkdev_driver_ioctl+0x65/0x88
[   21.796090]  [<c0651b12>] blkdev_ioctl+0xa2b/0xa65
[   21.796095]  [<c065bafc>] ? kobject_get+0x20/0x37
[   21.796099]  [<c0652230>] ? get_disk+0x7e/0xa8
[   21.796103]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[   21.796107]  [<c04b94fe>] ? page_address+0x95/0xcb
[   21.796111]  [<c04b9b51>] ? kmap_high+0x3f9/0x40f
[   21.796115]  [<c0478126>] ? rt_up+0x3a/0x61
[   21.796119]  [<c09ab92d>] ? unlock_kernel+0x34/0x47
[   21.796123]  [<c04a7eb7>] ? find_get_page+0x84/0xab
[   21.796127]  [<c044aad5>] ? __wake_up+0x3b/0x56
[   21.796131]  [<c04b95db>] ? kunmap_high+0xa7/0xbb
[   21.796135]  [<c04f6137>] block_ioctl+0x3f/0x58
[   21.796139]  [<c04f60f8>] ? block_ioctl+0x0/0x58
[   21.796143]  [<c04dde0c>] vfs_ioctl+0x2d/0x85
[   21.796146]  [<c04de412>] do_vfs_ioctl+0x4b5/0x501
[   21.796151]  [<c04bc25a>] ? handle_mm_fault+0x2d3/0x699
[   21.796155]  [<c04de4b5>] sys_ioctl+0x57/0x82
[   21.796159]  [<c0420086>] sysenter_do_call+0x12/0x21
[   23.427669] cfg80211: Calling CRDA to update world regulatory domain
[   24.409852] cfg80211: World regulatory domain updated:
[   24.409857] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.409861] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.741209] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   24.741226] ath5k 0000:03:00.0: setting latency timer to 64
[   24.741352] ath5k 0000:03:00.0: registered as 'phy0'
[   24.895180] wmaster0 (ath5k): not using net_device_ops yet
[   24.896728] phy0: Selected rate control algorithm 'minstrel'
[   24.896795] wlan0 (ath5k): not using net_device_ops yet
[   24.898345] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
[   25.937648] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   25.937657] in_atomic(): 0, irqs_disabled(): 1, pid: 2075, name: lvm
[   25.937664] Pid: 2075, comm: lvm Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   25.937670] Call Trace:
[   25.937683]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   25.937691]  [<c043ee55>] kmap+0x50/0x77
[   25.937697]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   25.937705]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   25.937713]  [<c04f75f1>] dio_get_page+0x59/0x124
[   25.937721]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   25.937728]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   25.937738]  [<c065bafc>] ? kobject_get+0x20/0x37
[   25.937746]  [<c0652230>] ? get_disk+0x7e/0xa8
[   25.937753]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   25.937760]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   25.937768]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   25.937775]  [<c04f712c>] ? blkdev_open+0x71/0xaf
[   25.937785]  [<c04cf51f>] ? __dentry_open+0x193/0x276
[   25.937792]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   25.937801]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   25.937811]  [<c09aa5cb>] ? rt_mutex_lock+0x23/0x5c
[   25.937819]  [<c09aacf2>] ? _mutex_unlock+0x17/0x2a
[   25.937828]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   25.937835]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   25.937841]  [<c04d1b61>] vfs_read+0x99/0x14e
[   25.937848]  [<c04d1cf7>] sys_read+0x50/0x87
[   25.937855]  [<c0420086>] sysenter_do_call+0x12/0x21
[   26.904618] EXT3 FS on dm-0, internal journal
[   27.017853] kjournald starting.  Commit interval 5 seconds
[   27.018257] EXT3 FS on sda3, internal journal
[   27.018268] EXT3-fs: mounted filesystem with ordered data mode.
[   46.073402] usb 2-1: new low speed USB device using uhci_hcd and address 3
[   46.245423] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
[   46.245431] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   46.245437] usb 2-1: Product: DELL USB Keyboard
[   46.245441] usb 2-1: Manufacturer: DELL
[   46.245633] usb 2-1: configuration #1 chosen from 1 choice
[   46.263774] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input14
[   46.281111] generic-usb 0003:413C:2003.0006: input,hidraw5: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-1/input0
[   46.309496] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input15
[   46.331110] generic-usb 0003:413C:2003.0007: input,hidraw6: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:1d.0-1/input1

Belonging config is:
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc4-rt2
# Thu Feb 19 16:26:17 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ASM_SEMAPHORES=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_PROFILE_NMI=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_32=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y CONFIG_PREEMPT_HARDIRQS=y CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x400000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x400000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRNET is not set
CONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_MAC80211=m

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_CS553X=m CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing #
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=y
CONFIG_DUMMY=y
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=y
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOL2TP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; #

#

# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

maintainer
#52 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 17 lines · Thomas Meyer
[    0.003333] ------------[ cut here ]------------
[    0.003333] WARNING: at mm/highmem.c:225 kmap_flush_unused+0x2b/0x4b()
[    0.003333] Hardware name: MacBookPro1,1
[    0.003333] Modules linked in:
[    0.003333] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #54
[    0.003333] Call Trace:
[    0.003333]  [<c0451e70>] warn_slowpath+0x8a/0xd3
[    0.003333]  [<c043ee71>] ? kmap+0x6c/0x77
[    0.003333]  [<c04ad7f5>] ? get_page_from_freelist+0x389/0x42b
[    0.003333]  [<c04adb8f>] ? __alloc_pages_internal+0xbf/0x3a6
[    0.003333]  [<c04b9b92>] kmap_flush_unused+0x2b/0x4b
[    0.003333]  [<c043b877>] change_page_attr_set_clr+0xe8/0x2ca
[    0.003333]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[    0.003333]  [<c04bbeb3>] ? __pte_alloc_kernel+0x50/0x83
[    0.003333]  [<c043bd16>] _set_memory_uc+0x27/0x3a
[    0.003333]  [<c043ac3d>] ioremap_change_attr+0x24/0x47
[    0.003333]  [<c043ae62>] __ioremap_caller+0x202/0x256
Quoted 8 lines
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c043afe0>] ioremap_nocache+0x1c/0x2f
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cd0b79>] hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cc34fb>] hpet_time_init+0x16/0x37
[    0.003333]  [<c0cbd997>] start_kernel+0x289/0x345
[    0.003333]  [<c0cbd093>] __init_begin+0x93/0xac
[    0.003333] ---[ end trace a7919e7f17c0a725 ]---

Hmm, this appears unimplemented on -rt, shouldn't hurt much, but could be fixed.

Quoted 15 lines
[   13.169831] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   13.169957] in_atomic(): 0, irqs_disabled(): 1, pid: 1030, name: cryptsetup
[   13.170075] Pid: 1030, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   13.170196] Call Trace:
[   13.170284]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   13.170374]  [<c043ee55>] kmap+0x50/0x77
[   13.170460]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   13.170548]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   13.170639]  [<c04f75f1>] dio_get_page+0x59/0x124
[   13.170729]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   13.170819]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   13.170837]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   13.170837]  [<c05ff445>] ? avc_has_perm+0x56/0x71
Quoted 8 lines
[   13.170837]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   13.170837]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   13.170837]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
[   13.170837]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   13.170837]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   13.170837]  [<c04d1b61>] vfs_read+0x99/0x14e
[   13.170837]  [<c04d1cf7>] sys_read+0x50/0x87
[   13.170837]  [<c0420086>] sysenter_do_call+0x12/0x21

Caused by CONFIG_HIGHPTE=y,

as long as TLB flushes are IPIs we really need to disable IRQs for gup_fast() and thus will either need non-preemptible kmap or disabled high-pte or disable the gup_fast() fast-path, which would be a shame.

#53 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:

Quoted 18 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

Are you interested in these BUG reports?

Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm hitting these two BUGs:

[   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[   19.840113] Call Trace:
[   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
[   19.840128]  [<c043ee31>] kmap+0x50/0x77
[   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
[   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
[   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
[   19.840189]  [<c0467022>] kthread+0x4a/0x82
[   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
[   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10

and:

[  357.286589] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[  357.286597] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[  357.286605] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[  357.286611] Call Trace:
[  357.286624]  [<c0444cbd>] __might_sleep+0xda/0xf0
[  357.286631]  [<c043ee31>] kmap+0x50/0x77
[  357.286640]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[  357.286647]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[  357.286654]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[  357.286664]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[  357.286672]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[  357.286680]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[  357.286688]  [<c09ab024>] ? __spin_unlock+0x1e/0x43
[  357.286696]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
[  357.286703]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[  357.286711]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[  357.286720]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[  357.286727]  [<c0494ac7>] do_irqd+0x141/0x271
[  357.286734]  [<c0494986>] ? do_irqd+0x0/0x271
[  357.286742]  [<c0467022>] kthread+0x4a/0x82
[  357.286757]  [<c0466fd8>] ? kthread+0x0/0x82
[  357.286762]  [<c0420b67>] kernel_thread_helper+0x7/0x10

greets
thomas

maintainer
#54 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 1 line · Thomas Meyer

Are you interested in these BUG reports?

Yes we are, thanks!

Quoted 2 lines

Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm hitting these two BUGs:

They appear to be identical, so I'll consider them two instances of one bug :-)

Quoted 13 lines
[   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[   19.840113] Call Trace:
[   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
[   19.840128]  [<c043ee31>] kmap+0x50/0x77
[   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
Quoted 8 lines
[   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
[   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
[   19.840189]  [<c0467022>] kthread+0x4a/0x82
[   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
[   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10

sg_copy_buffer() seems to disable IRQs, however since on -rt everything is a irq-thread and kmap is preemptible, we don't appear to have that need.

CC'd everybody who ever touched the file.

---
 lib/scatterlist.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
lib/scatterlist.c +2 -2
index b7b449d..4c6510d 100644
@@ -426,7 +426,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;
@@ -445,7 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return offset;
 }
 
#55 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Am Freitag, den 20.02.2009, 08:49 +0100 schrieb Peter Zijlstra:

Quoted 57 lines · Thomas Meyer
Quoted 1 line

Are you interested in these BUG reports?

Yes we are, thanks!

Quoted 2 lines

Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm hitting these two BUGs:

They appear to be identical, so I'll consider them two instances of one bug :-)

Quoted 13 lines
[   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[   19.840113] Call Trace:
[   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
[   19.840128]  [<c043ee31>] kmap+0x50/0x77
[   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
Quoted 8 lines
[   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
[   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
[   19.840189]  [<c0467022>] kthread+0x4a/0x82
[   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
[   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10

sg_copy_buffer() seems to disable IRQs, however since on -rt everything is a irq-thread and kmap is preemptible, we don't appear to have that need.

CC'd everybody who ever touched the file.

---
 lib/scatterlist.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
lib/scatterlist.c +1 -1
index b7b449d..4c6510d 100644
@@ -426,7 +426,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;

lib/scatterlist.c static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, · line 451

Quoted 8 lines
lib/scatterlist.c +1 -1
@@ -445,7 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return offset;
 }
 

With above patch I get a lot of warnings in

lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4().

Like:

[   34.946650] ------------[ cut here ]------------
[   34.946653] WARNING: at lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4()
[   34.946655] Hardware name: MacBookPro1,1
[   34.946657] Modules linked in: ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
[   34.946665] Pid: 8, comm: sirq-block/0 Tainted: G        W  2.6.29-rc4-rt2-tip #56
[   34.946690] Call Trace:
[   34.946694]  [<c0451e50>] warn_slowpath+0x8a/0xd3
[   34.946698]  [<c09ab0e4>] ? __spin_unlock+0x1e/0x43
[   34.946703]  [<c04476d6>] ? enqueue_task_fair+0x2df/0x331
[   34.946707]  [<c0442c7c>] ? enqueue_task+0x70/0x8e
[   34.946711]  [<c044cf91>] ? try_to_wake_up+0x2eb/0x306
[   34.946715]  [<c0663e0a>] sg_miter_stop+0x5a/0xa4
[   34.946719]  [<c0663fd6>] sg_copy_buffer+0xa3/0xbe
[   34.946723]  [<c0664041>] sg_copy_from_buffer+0x1d/0x33
[   34.946728]  [<c0774c3d>] ata_scsi_rbuf_fill+0x59/0x90
[   34.946731]  [<c07760ed>] ? ata_scsiop_inq_80+0x0/0x41
[   34.946735]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946739]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946743]  [<c0774e24>] ata_scsi_simulate+0x1b0/0x1f8
[   34.946747]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946752]  [<c0775178>] ata_scsi_queuecmd+0x16d/0x1bc
[   34.946756]  [<c0755de0>] scsi_dispatch_cmd+0x18a/0x208
[   34.946760]  [<c075b378>] scsi_request_fn+0x349/0x487
[   34.946764]  [<c064bcb6>] blk_invoke_request_fn+0x75/0x146
[   34.946768]  [<c064c671>] __blk_run_queue+0x2d/0x42
[   34.946772]  [<c064c6ac>] blk_run_queue+0x26/0x46
[   34.946775]  [<c075a836>] scsi_run_queue+0x283/0x321
[   34.946780]  [<c075b6c9>] scsi_next_command+0x36/0x54
[   34.946783]  [<c075b8e2>] scsi_end_request+0x84/0xa1
[   34.946787]  [<c075beb9>] scsi_io_completion+0x1a4/0x3a6
[   34.946792]  [<c075c1be>] ? scsi_device_unbusy+0x8c/0xa3
[   34.946796]  [<c0755b25>] scsi_finish_command+0xd3/0xec
[   34.946800]  [<c075c3bc>] scsi_softirq_done+0x104/0x11d
[   34.946804]  [<c06505df>] blk_done_softirq+0x5f/0x7e
[   34.946808]  [<c04575e3>] ksoftirqd+0x12d/0x223
[   34.946813]  [<c04574b6>] ? ksoftirqd+0x0/0x223
[   34.946816]  [<c0467022>] kthread+0x4a/0x82
[   34.946820]  [<c0466fd8>] ? kthread+0x0/0x82
[   34.946824]  [<c0420b67>] kernel_thread_helper+0x7/0x10
[   34.946827] ---[ end trace a7919e7f17c0a754 ]---
#56 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 7 lines · Thomas Meyer

With above patch I get a lot of warnings in

lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4().

Like:

[   34.946650] ------------[ cut here ]------------
[   34.946653] WARNING: at lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4()

could you edit lib/scatterlist.c line 395 and remove this line:

                        WARN_ON(!irqs_disabled());

?

Ingo

#57 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner
Quoted 3 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

FYI:

These patches in RT2:

rt-fix-ipi-kfree-introduce-ipi_softirq.patch rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch

Cause a hard-lock when running dhcp on my 8-way AMD box.

Reverting them eliminates the issue.

Sven

maintainer
#58 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 6 lines · Sven-Thorsten Dietrich
Quoted 3 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

FYI:

Quoted 8 lines

These patches in RT2:

rt-fix-ipi-kfree-introduce-ipi_softirq.patch rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch

Cause a hard-lock when running dhcp on my 8-way AMD box.

Reverting them eliminates the issue.

can you try the patches in:

http://lkml.org/lkml/2009/2/17/385
http://lkml.org/lkml/2009/2/17/384
http://lkml.org/lkml/2009/2/17/387

#59 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 14 lines · Peter Zijlstra
Quoted 13 lines · Sven-Thorsten Dietrich
Quoted 3 lines · Thomas Gleixner

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

FYI:

These patches in RT2:

rt-fix-ipi-kfree-introduce-ipi_softirq.patch rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch

Cause a hard-lock when running dhcp on my 8-way AMD box.

Quoted 10 lines
Quoted 1 line

Reverting them eliminates the issue.

can you try the patches in:

http://lkml.org/lkml/2009/2/17/385
http://lkml.org/lkml/2009/2/17/384
http://lkml.org/lkml/2009/2/17/387

These work with 2.6.29-rc4-rt2.

Also fixes serial console stall.

I applied them before RT and had to tweak these patches:

preempt-realtime-ipi-call-lock-raw.patch
preempt-realtime-x86_64.patch

Thanks!

Sven

#60 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:

Quoted 18 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 7 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo
--

Hi,

I got this warning, that i never saw before with a non rt-preempt kernel. But maybe it's just coincidence...

[22652.437889] ------------[ cut here ]------------
[22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
[22652.437904] Hardware name: MacBookPro1,1
[22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
[22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
[22652.437958] Call Trace:
[22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
[22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
[22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
[22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
[22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
[22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
[22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
[22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
[22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
[22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
[22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
[22652.438099]  [<c0467022>] kthread+0x4a/0x82
[22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
[22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
[22652.438120] ---[ end trace a7919e7f17c0a727 ]---
#61 lore raw

Re: [Announce] 2.6.29-rc4-rt2

Quoted 45 lines · Thomas Meyer

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:

Quoted 18 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 7 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo
--

Hi,

I got this warning, that i never saw before with a non rt-preempt kernel. But maybe it's just coincidence...

[22652.437889] ------------[ cut here ]------------
[22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
[22652.437904] Hardware name: MacBookPro1,1
[22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
[22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
[22652.437958] Call Trace:
[22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
[22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
[22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
[22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
[22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
[22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
[22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
Quoted 9 lines
[22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
[22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
[22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
[22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
[22652.438099]  [<c0467022>] kthread+0x4a/0x82
[22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
[22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
[22652.438120] ---[ end trace a7919e7f17c0a727 ]---

Hi,

It's an known issue on ath5k (or 80211):
http://patchwork.kernel.org/patch/1169/

So not preempt-rt related. Perhaps it has been fixed in -rc5.

Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

#62 lore raw

Re: [Announce] 2.6.29-rc4-rt2

In reply to Thomas Gleixner

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:

Quoted 18 lines

We are pleased to announce the first update to our new preempt-rt series. It fixes the reported bugs and some more.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

Hi,

Is this one probably rt-preempt related?

BUG: unable to handle kernel paging request at 00100100
IP: [<f8aa431c>] __nf_conntrack_find+0xd6/0x109 [nf_conntrack]
*pde = 34ece067 *pte = 00000000 
Oops: 0000 [#1] PREEMPT SMP 
last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0/energy_full
Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack_ipv6 xt_state nf_conntrack ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]

Pid: 5, comm: sirq-timer/0 Tainted: G W (2.6.29-rc4-rt2-tip #60) MacBookPro1,1
EIP: 0060:[<f8aa431c>] EFLAGS: 00010206 CPU: 0
EIP is at __nf_conntrack_find+0xd6/0x109 [nf_conntrack]
EAX: f4853240 EBX: f7053d38 ECX: 00100100 EDX: f4f5c640
ESI: ea190868 EDI: c0e07ec0 EBP: f7053cc8 ESP: f7053cb8
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 preempt:00000001
Process sirq-timer/0 (pid: 5, ti=f7053000 task=f7064dc0 task.ti=f7053000)

Stack:
 985792de f7053d38 c0e07ec0 c0e07ec0 f7053ce0 f8aa4731 985792de f7053d38
 f8ba3bb8 c0e07ec0 f7053d70 f8aa59c5 f6b81a00 f1ec5ef4 00000003 00000002
 f8ab132c 00000014 f7053d94 00000014 f7053d30 06053d4e f5a92000 f67f2980
Call Trace:
 [<f8aa4731>] ? nf_conntrack_find_get+0x26/0x75 [nf_conntrack]
 [<f8aa59c5>] ? nf_conntrack_in+0x15a/0x45d [nf_conntrack]
 [<f8ba2472>] ? ipv4_conntrack_local+0x3d/0x58 [nf_conntrack_ipv4]
 [<c089cdaf>] ? nf_iterate+0x4f/0x93
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c089cf84>] ? nf_hook_slow+0x65/0xd3
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b5292>] ? __ip_local_out+0x9f/0xba
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b52c8>] ? ip_local_out+0x1b/0x3d
 [<c08b5b31>] ? ip_queue_xmit+0x2cf/0x358
 [<c0442c7c>] ? enqueue_task+0x70/0x8e
 [<c08ca3de>] ? tcp_v4_send_check+0x85/0xd0
 [<c08c680e>] ? tcp_transmit_skb+0x5f9/0x642
 [<c08c5d35>] ? tcp_current_mss+0x66/0xeb
 [<c08c81b0>] ? tcp_retransmit_skb+0x4f2/0x632
 [<c08c99b0>] ? tcp_write_timer+0x3c2/0x592
 [<c045c17c>] ? run_timer_softirq+0x201/0x2a3
 [<c08c95ee>] ? tcp_write_timer+0x0/0x592
 [<c08c95ee>] ? tcp_write_timer+0x0/0x592
 [<c04575e3>] ? ksoftirqd+0x12d/0x223
 [<c04574b6>] ? ksoftirqd+0x0/0x223
 [<c0467022>] ? kthread+0x4a/0x82
 [<c0466fd8>] ? kthread+0x0/0x82
 [<c0420b67>] ? kernel_thread_helper+0x7/0x10
Code: 8b 97 30 03 00 00 74 10 f7 d2 64 a1 b4 64 d6 c0 8b 04 82 ff 40 04 eb 2d f7 d2 64 a1 b4 64 d6 c0 8b 04 82 ff 00 8b 09 85 c9 74 18 <8b> 01 0f 18 00 90 8b 03 89 ce 3b 41 08 0f 85 78 ff ff ff e9 4d 
EIP: [<f8aa431c>] __nf_conntrack_find+0xd6/0x109 [nf_conntrack] SS:ESP 0068:f7053cb8
---[ end trace a7919e7f17c0a727 ]---
#63 lore raw

[Announce] 2.6.29-rc6-rt2

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series. It forwards to 2.6.29-rc6 and fixes

- various 32bit highmem related problems
- paravirt interaction
- sg list warnings
- IPI updates

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt2 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt2.bz2

The broken out patches are also available at the same download locations.

Enjoy !

Thomas, Ingo

#64 lore raw

Re: [Announce] 2.6.29-rc6-rt2

We are pleased to announce the next update to our new preempt-rt series. It contains only one new patch:

- fix the nf_conntrack bug, which was reported by various folks

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt3 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#65 lore raw

[Announce] 2.6.29-rc6-rt3

We are pleased to announce the next update to our new preempt-rt series. It contains only one new patch:

- fix the nf_conntrack bug, which was reported by various folks

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt3 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#66 lore raw

Re: [Announce] 2.6.29-rc6-rt3

Am Dienstag, den 24.02.2009, 18:57 +0100 schrieb Thomas Gleixner:

Quoted 20 lines

We are pleased to announce the next update to our new preempt-rt series. It contains only one new patch:

- fix the nf_conntrack bug, which was reported by various folks

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt3 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2

Quoted 6 lines

The broken out patches are also available at the same download locations.

Enjoy !

tglx

Hi,

Should suspend&resume to ram work with this patchset applied?

greets
thomas

#68 lore raw

Re: [Announce] 2.6.29-rc6-rt3

Am Mittwoch, den 25.02.2009, 19:43 +0100 schrieb Peter Zijlstra:

Quoted 11 lines · Thomas Meyer
Quoted 7 lines

Am Dienstag, den 24.02.2009, 18:57 +0100 schrieb Thomas Gleixner:

Quoted 3 lines

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2

Should suspend&resume to ram work with this patchset applied?

If it works for you without (plain .29-rc6), then it ought to work with.

plain .29-rc6 suspends and resumes just fine. but .29-rc6-rt3 suspends just fine, but never resumes. Is there an early_dma thing for the resume path for 1394?

greets
thomas

#69 lore raw

Re: [Announce] 2.6.29-rc6-rt3

In reply to Thomas Gleixner
Quoted 1 line · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt

What is the issues with JFFS2?

fs/jffs2/Kconfig +2 -0
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear

Thanks,
Cliff

maintainer
#70 lore raw

Re: [Announce] 2.6.29-rc6-rt3

Quoted 8 lines · Cliff Brake
Quoted 1 line · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt

What is the issues with JFFS2?

fs/jffs2/Kconfig config JFFS2_FS · line 9

Quoted 8 lines
fs/jffs2/Kconfig +2 -0
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear

Comment implies build breakage, remove this and try to compile the thing seems like the easiest way to answer your question.

I'm sure Thomas will appreciate any patches to fix the resulting borkage.

#71 lore raw

Re: [Announce] 2.6.29-rc6-rt3

Quoted 21 lines · Peter Zijlstra
Quoted 8 lines · Cliff Brake
Quoted 1 line · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt

What is the issues with JFFS2?

fs/jffs2/Kconfig config JFFS2_FS · line 9

Quoted 8 lines
fs/jffs2/Kconfig +2 -0
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear

Comment implies build breakage, remove this and try to compile the thing seems like the easiest way to answer your question.

Quoted 2 lines

I'm sure Thomas will appreciate any patches to fix the resulting borkage.

the full commit is the one below. I've attached the bad config - the build bug might have been fixed meanwhile.

Ingo

--------------->

Quoted 1 line

From 50f971ad73ea9550b1d8e34006bd11c7e108b24f Mon Sep 17 00:00:00 2001

From: Ingo Molnar <[email protected]>
Date: Wed, 22 Oct 2008 06:15:21 +0200
Subject: [PATCH] qa: disable jffs2 for now

fs/jffs2/nodemgmt.c: In function 'jffs2_find_nextblock':
fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs' fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_len' fs/jffs2/nodemgmt.c:266: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'

with config-Wed_Oct_22_05_12_21_CEST_2008.bad

---
 fs/jffs2/Kconfig |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
fs/jffs2/Kconfig +2 -0
index 6ae169c..087383f 100644
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear
# c55c1351
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27
# Wed Oct 22 05:12:21 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
CONFIG_BROKEN_BOOT_ALLOWED2=y
CONFIG_BROKEN_BOOT_ALLOWED=y
CONFIG_BROKEN_BOOT=y
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=21
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y
# CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_NET_NS=y
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=m
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
# CONFIG_ACTISYS_DONGLE is not set
# CONFIG_TEKRAM_DONGLE is not set
CONFIG_TOIM3232_DONGLE=m
# CONFIG_LITELINK_DONGLE is not set
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_PHONET=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=y
CONFIG_FTL=m
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=y
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
# CONFIG_MTD_DOCPROBE_HIGH is not set
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y

#
# UBI debugging options
#
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing #
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_RAWIO is not set CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_NETDEVICES is not set
CONFIG_PHYLIB=y
CONFIG_MLX4_CORE=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
# CONFIG_HISAX_ELSA_CS is not set
CONFIG_HISAX_AVM_A1_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
# CONFIG_HISAX_HFC4S8S is not set
CONFIG_HISAX_HDLC=y

#
# Active cards
#
# CONFIG_HYSDN is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=m
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=m
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=y
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=y
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
CONFIG_PCF8575=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_TPS65010=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_LM70_LLP is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=m
# CONFIG_GPIO_PCF857X is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
CONFIG_W83697HF_WDT=y
CONFIG_W83697UG_WDT=m
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=y
# CONFIG_MFD_TMIO is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #

#

# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=m
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=y
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_SRP=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_DEBUG=y
CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
CONFIG_UBIFS_FS_DEBUG_CHKS=y
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NCP_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DIRECT_GBPAGES=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_IOMMU_DEBUG=y
# CONFIG_IOMMU_LEAK is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y

#72 lore raw

Re: [Announce] 2.6.29-rc6-rt3

Quoted 12 lines · Ingo Molnar

the full commit is the one below. I've attached the bad config - the build bug might have been fixed meanwhile.

       Ingo

--------------->
From 50f971ad73ea9550b1d8e34006bd11c7e108b24f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Wed, 22 Oct 2008 06:15:21 +0200
Subject: [PATCH] qa: disable jffs2 for now

Quoted 4 lines

fs/jffs2/nodemgmt.c: In function 'jffs2_find_nextblock':
fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs' fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_len' fs/jffs2/nodemgmt.c:266: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'

This appears to be fixed, as I did not observe any compile problems after re-enabling JFFS2.

Thanks,
Cliff

Signature · 7 lines
=======================
Cliff Brake
http://bec-systems.com
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#73 lore raw

[Announce] 2.6.29-rc7-rt1

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series. It contains only one new patch:

- port forward to 2.6.29-rc7
- disable CONFIG_MAXCPUS for now (undebugged runtime bug)
- fix CONFIG_HIGHMEM problems
- fix netfilter problems
- make debugobjects -rt safe
- various build fixes

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc7-rt1 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc7.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#74 lore raw

Re: [Announce] 2.6.29-rc7-rt1

Hi

It is great to see that the -rt patchset is moving again.

Quoted 1 line

http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.bz2

This should be
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.patch.bz2

As far as i understand this is again for x86. I tried some patches to get the ARM platform working as the platform i am working on (phytec i.mx31) is not supported by the stable 2.6.26-rt release. The attached patches are for reference only as i think some of them are on their way via the pengutronix git tree and others are just hacks to get this thing compile. These patches enable rt functionality as tested with cyclictest but the kernel is not stable, so some pieces are missing.

So my question is, what pieces are missing on the ARM platform to get it working?

Regards
Tim

The following patches are against the 2.6.29-rc4-rt2 in an attempt to get ARM working.
Subject: [PATCH] add compile fixes to rt patchset for arm

---
 arch/arm/Kconfig                        |   13 +------------
 arch/arm/include/asm/thread_info.h      |    3 ++-
 arch/arm/plat-mxc/include/mach/memory.h |    2 ++
 include/linux/spinlock.h                |    3 ++-
 4 files changed, 7 insertions(+), 14 deletions(-)
arch/arm/Kconfig +1 -12
index dbfdf87..ceb2e01 100644
@@ -838,18 +838,7 @@ config LOCAL_TIMERS
          accounting to be spread across the timer interval, preventing a
          "thundering herd" at every timer tick.
 
-config PREEMPT
-       bool "Preemptible Kernel (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
-       help
-         This option reduces the latency of the kernel when reacting to
-         real-time or interactive events by allowing a low priority process to
-         be preempted even if it is in kernel mode executing a system call.
-         This allows applications to run more reliably even when the system is
-         under load.
-
-         Say Y here if you are building a kernel for a desktop, embedded
-         or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
        int
arch/arm/include/asm/thread_info.h +2 -1
index 68b9ec8..b501541 100644
@@ -119,7 +119,8 @@ extern void iwmmxt_task_switch(struct thread_info *);
  * We use bit 30 of the preempt_count to indicate that kernel
  * preemption is occurring.  See <asm/hardirq.h>.
  */
-#define PREEMPT_ACTIVE 0x40000000
+#define PREEMPT_ACTIVE         0x10000000
+/*FIXME TIM #define PREEMPT_ACTIVE     0x40000000*/
 
 /*
  * thread information flags:
(quoted diff) +0 -0

b/arch/arm/plat-mxc/include/mach/memory.h
index 0b80839..b43a536 100644

arch/arm/plat-mxc/include/mach/memory.h +2 -0
@@ -19,4 +19,6 @@
 #define PHYS_OFFSET            UL(0x80000000)
 #endif
 
+#define arch_is_coherent()     1
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
include/linux/spinlock.h +2 -1
index c11b3a2..6c9b9b9 100644
@@ -560,7 +560,8 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
 # ifdef CONFIG_DEBUG_SPINLOCK
        BUG_ON(!test_bit(bitnum, addr));
 # endif
-       clear_bit_unlock(bitnum, addr);
+       //FIXME TIM  clear_bit_unlock(bitnum, addr);
+       clear_bit(bitnum,addr);
 #endif
        __release(bitlock);
 }

--
1.5.6.5

-- ---

 arch/arm/kernel/process.c |    2 +-
 include/linux/spinlock.h  |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/kernel/process.c +1 -1
index d3ea6fa..8fbf03b 100644
@@ -167,7 +167,7 @@ void cpu_idle(void)
                        idle();
                leds_event(led_idle_end);
                tick_nohz_restart_sched_tick();
-               preempt_enable_no_resched();
+               __preempt_enable_no_resched();
                schedule();
                preempt_disable();
        }
include/linux/spinlock.h +2 -2
index 6c9b9b9..130fbdd 100644
@@ -93,6 +93,7 @@
 #include <linux/bottom_half.h>
 #include <linux/irqflags.h>
 #include <linux/pickop.h>
+#include <asm/memory.h>
 
 #include <asm/system.h>
 
@@ -560,8 +561,7 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
 # ifdef CONFIG_DEBUG_SPINLOCK
        BUG_ON(!test_bit(bitnum, addr));
 # endif
-       //FIXME TIM  clear_bit_unlock(bitnum, addr);
-       clear_bit(bitnum,addr);
+       clear_bit_unlock(bitnum, addr);
 #endif
        __release(bitlock);
 }

--
1.5.6.5

''=~('(?{'.('._@@[~'^'^-)./^').'"'.('}@@~-]@_^__'^'))-^~<.;;-}').',$/})')

#75 lore raw

Re: [Announce] 2.6.29-rc7-rt1

Hello Tim,

Quoted 2 lines · Tim Sander

So my question is, what pieces are missing on the ARM platform to get it working?

See the follow up mail I will write on Thomas announcement for my current status.

arch/arm/include/asm/thread_info.h extern void iwmmxt_task_switch(struct thread_info *); · line 123

Quoted 11 lines
arch/arm/include/asm/thread_info.h +2 -1
index 68b9ec8..b501541 100644
@@ -119,7 +119,8 @@ extern void iwmmxt_task_switch(struct thread_info *);
  * We use bit 30 of the preempt_count to indicate that kernel
  * preemption is occurring.  See <asm/hardirq.h>.
  */
-#define PREEMPT_ACTIVE 0x40000000
+#define PREEMPT_ACTIVE         0x10000000
+/*FIXME TIM #define PREEMPT_ACTIVE     0x40000000*/

I didn't need this anymore for -rc7-rt1.

arch/arm/plat-mxc/include/mach/memory.h line 23

Quoted 13 lines
arch/arm/include/asm/thread_info.h +0 -0
 /*
  * thread information flags:
arch/arm/plat-mxc/include/mach/memory.h +2 -0
index 0b80839..b43a536 100644
@@ -19,4 +19,6 @@
 #define PHYS_OFFSET            UL(0x80000000)
 #endif
 
+#define arch_is_coherent()     1
+

I suggested a better fix already last time. Moreover I think imx isn't coherent.

include/linux/spinlock.h line 96

Quoted 9 lines
include/linux/spinlock.h +1 -0
index 6c9b9b9..130fbdd 100644
@@ -93,6 +93,7 @@
 #include <linux/bottom_half.h>
 #include <linux/irqflags.h>
 #include <linux/pickop.h>
+#include <asm/memory.h>

Doing this in arch/arm/include/asm/bitops.h is less intrusive and it seems to me the better place. See my patch stack.

include/linux/spinlock.h static inline void bit_spin_unlock(int bitnum, unsigned long *addr) · line 564

Quoted 7 lines
include/linux/spinlock.h +1 -2
@@ -560,8 +561,7 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
 # ifdef CONFIG_DEBUG_SPINLOCK
        BUG_ON(!test_bit(bitnum, addr));
 # endif
-       //FIXME TIM  clear_bit_unlock(bitnum, addr);
-       clear_bit(bitnum,addr);
+       clear_bit_unlock(bitnum, addr);

It would be easier to check your patch if it didn't contain reverts of earlier changes.

Best regards
Uwe

Signature · 6 lines
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#76 lore raw

some ARM fixes for 2.6.29-rc7-rt1

In reply to Thomas Gleixner

Hello,

Quoted 9 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series. It contains only one new patch:

- port forward to 2.6.29-rc7
- disable CONFIG_MAXCPUS for now (undebugged runtime bug)
- fix CONFIG_HIGHMEM problems
- fix netfilter problems
- make debugobjects -rt safe
- various build fixes

on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find at

	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu

The top commit currently isn't pretty as it contains several independant fixes. Some of them are netX specific so you probably don't need them, but they shouldn't hurt you either.

I will update this branch as I continue working in a non-fast-forward manner. I use TopGit to manage this branch, you might want to use it, too, if you intend to follow my work.

My status quo is:

	Testing tracer sched_switch: PASSED
	Testing tracer function: PASSED
	Testing tracer irqsoff: .. no entries found ..FAILED!
	Testing tracer preemptoff: .. no entries found ..FAILED!
	Testing tracer preemptirqsoff: .. no entries found ..<4>------------[ cut here ]------------
	WARNING: at /ptx/work/octopus/WORK_2_A/ukl/gsrc/linux-2.6/kernel/trace/trace.c:683 warn_slowpath+0x18/0xa0()
	Modules linked in:
	[<c0244d40>] (dump_stack+0x0/0x18) from [<c003787c>] (warn_slowpath+0x6c/0xa0)
	[<c0037810>] (warn_slowpath+0x0/0xa0) from [<c00750d0>] (tracing_start+0x60/0xdc)
	 r3:ffffffff r2:00000000
	 r7:c074aaf0 r6:c0748a0c r5:60000013 r4:c074aac8
	[<c0075070>] (tracing_start+0x0/0xdc) from [<c0076430>] (trace_selftest_startup_preemptirqsoff+0x1ac/0x1d8)
	 r5:c1c1a000 r4:ffffffff
	[<c0076284>] (trace_selftest_startup_preemptirqsoff+0x0/0x1d8) from [<c00760c4>] (register_tracer+0x118/0x240)
	[<c0075fac>] (register_tracer+0x0/0x240) from [<c000ebbc>] (init_irqsoff_tracer+0x24/0x38)
	 r7:c000eb98 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c000eb98>] (init_irqsoff_tracer+0x0/0x38) from [<c00232c4>] (__exception_text_end+0x5c/0x1a4)
	[<c0023268>] (__exception_text_end+0x0/0x1a4) from [<c00085a4>] (kernel_init+0x90/0x1c0)
	 r8:00000000 r7:00000000 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c0008514>] (kernel_init+0x0/0x1c0) from [<c003aebc>] (do_exit+0x0/0x798)
	 r5:00000000 r4:00000000
	---[ end trace da227214a82491b7 ]---
	FAILED!

The warning is triggered here because tracing_start is called twice in trace_selftest_startup_preemptirqsoff's error path[1].

I researched for some time now why the tracers doesn't pass the self-tests, but without success. It's bed time and any hints are welcome.

Other than that my machine boots and reports from time to time

scheduling while atomic

and

sleeping function called from invalid context at kernel/rtmutex.c:683

Both errors probably happen because some spin_locks need to be converted to raw_spin_locks. Will look later.

I provide this uncooked state to prevent duplicate work, so please excuse the bad code and commit history. If it upsets you, please send patches :-)

Best regards
Uwe

[1] if trace_test_buffer sets count = 0 or returns != 0 in kernel/trace/trace_selftest.c:440, the code flow is:

	tracing_start()
	goto out;

	...
out:
	trace->reset(tr);
	tracing_start();

I think the last tracing_start is wrong, but I didn't check deeply.

Signature · 6 lines
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#77 lore raw

Re: some ARM fixes for 2.6.29-rc7-rt1

Hello,

Quoted 13 lines · Uwe Kleine-König

on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find at

	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu

The top commit currently isn't pretty as it contains several independant fixes. Some of them are netX specific so you probably don't need them, but they shouldn't hurt you either.

I will update this branch as I continue working in a non-fast-forward manner. I use TopGit to manage this branch, you might want to use it, too, if you intend to follow my work.

Quoted 7 lines

My status quo is:

Testing tracer sched_switch: PASSED
Testing tracer function: PASSED
Testing tracer irqsoff: .. no entries found ..FAILED! Testing tracer preemptoff: .. no entries found ..FAILED! Testing tracer preemptirqsoff: .. no entries found ..

[removed stack dump]

Quoted 1 line

FAILED!

I still have this problem. I digged into irqsoff without finding the reason.

Looking at trace_selftest_startup_irqsoff I saw that trace_buffer_lock_reserve is called thrice successfully.

Steven (or someone else of course), do you can give me a hint?

Quoted 10 lines

Other than that my machine boots and reports from time to time

scheduling while atomic

and

sleeping function called from invalid context at kernel/rtmutex.c:683

Both errors probably happen because some spin_locks need to be converted to raw_spin_locks. Will look later.

Up to now I didn't try to do much with my system, but just booting doesn't yield such BUGs or Warnings anymore.

Best regards
Uwe

Signature · 6 lines
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#78 lore raw

[Announce] 2.6.29-rc78rt1

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- port forward to 2.6.29-rc8
- disable -rt conflicting config options
- hotplug cpu fixes (peterz)
- slab/pagealloc lock breaks (peterz / tglx)
- sigqueue caching for -rt tasks
- posixtimer thread avoid useless wakeups
- various build fixes (mingo, frank ....)
- lots of tracer updates from -tip (check the tip git logs)

The outstanding improvement is the slab/pagealloc change which breaks and splits locking and brought down worst case latencies in problematic use cases from >500us to <100us.

As a side note:

There seems to be a wide spread underestimation of the problem spots exposed by preempt-rt. The usual shrug off answer is:

"I don't care about -rt. Come back if you can expose the same problem in the mainline kernel."

This is a fundamentally wrong answer.

preempt-rt mostly exposes existing latency spots and magnifies them

Reducing latencies in -rt by a factor 5 will be not that prominent in a non-rt setup, but the problematic code area will still produce measureable latency problems.

I'm well aware of the tradeoff between determinitic behaviour and throughput, but problematic spots (e.g. lock contentions) hurt both.

So can we please put down the stupid "I don't care about -rt" attitudes and accept that we have to think about the mutual benefits of deterministic and throughput aspects without hurting each other ?

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt1 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt1.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

P.S.: ARM/PowerPC support is in the pipeline and will be available
with -rt2 (hopefully :)

#79 lore raw

Re: [Announce] 2.6.29-rc78rt1

Quoted 3 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

( snip )

Quoted 1 line

- lots of tracer updates from -tip (check the tip git logs)

I have been trying to reverse engineer which git commits comprise origin.patch, but my git-foo is not up to the task. For any single file in origin.patch, I can work backwards to find the git commit associated with it, but I don't know how to easily create a list of all of the git commits that are associated with origin.patch. Do you have any quick hints that would assist me in my quest?

Thanks!

Frank Rowand
Sony Corporation of America

#80 lore raw

Re: [Announce] 2.6.29-rc78rt1

Quoted 10 lines · Frank Rowand
Quoted 2 lines

- lots of tracer updates from -tip (check the tip git logs)

I have been trying to reverse engineer which git commits comprise origin.patch, but my git-foo is not up to the task. For any single file in origin.patch, I can work backwards to find the git commit associated with it, but I don't know how to easily create a list of all of the git commits that are associated with origin.patch. Do you have any quick hints that would assist me in my quest?

git log v.2.6.29-rc8..

I'm going to add a log to the broken out tarball next time.

Thanks,

tglx

#81 lore raw

Re: [Announce] 2.6.29-rc78rt1

Quoted 10 lines · Thomas Gleixner
Quoted 8 lines · Frank Rowand
Quoted 1 line

- lots of tracer updates from -tip (check the tip git logs)

I have been trying to reverse engineer which git commits comprise origin.patch, but my git-foo is not up to the task. For any single file in origin.patch, I can work backwards to find the git commit associated with it, but I don't know how to easily create a list of all of the git commits that are associated with origin.patch. Do you have any quick hints that would assist me in my quest?

Quoted 4 lines

git log v.2.6.29-rc8..

I'm going to add a log to the broken out tarball next time.

Thanks for the info! I'm getting closer, but I'm still missing something or doing something wrong.

The git tree I'm using (from .git/config):
[remote "origin"]

        url = git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git

On branch "master".

I tried to re-create origin.patch by:

  git format-patch --abbrev=7 --stdout -p v2.6.29-rc8.. >MY_ORIGIN.PATCH

but got different results than what is in origin.patch.bz. MY_ORIGIN.PATCH has the same source changes as origin.patch.bz (at least for the small sample of files that I checked), but sometimes split across several patches instead of a single patch.

Using Documentation/x86/boot.txt as an example of the difference:

patch-2.6.29-rc8-rt1-broken-out.tar.bz2 origin.patch.bz shows:

    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index 7b4596a..e020366 100644

But the same changes in the git tree are split across two git commits (so I get two patches in my MY_ORIGIN.PATCH instead of the single patch in origin.patch.bz):

    $ git log v2.6.29-rc8.. -- Documentation/x86/boot.txt | grep commit
    commit 8b0e5860cb099d7958d13b00ffbc35ad02735700
    commit e56d0cfe7790fd3218ae4f6aae1335547fea8763
    commit ee287587dafd77fd211e50637561224605c214b4
    (8b0e5860 is a merge of branches)

    $ git format-patch --abbrev=7 --stdout -p e56d0cfe^1..e56d0cfe \
      | grep -E "(^diff)|(^index)"
    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index 7b4596a..1229969 100644

    $ git format-patch --abbrev=7 --stdout -p ee287587^1..ee287587 \
      | grep -E "(^diff)|(^index)"
    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index fcdc62b..9ac70ff 100644

So I'm obviously in the wrong place or using the wrong technique to be able to re-create origin.patch.bz from the git repository. Any more quick hints to help me out here?

Also, "git log v2.6.29-rc8.." presumes that HEAD in my repository is the same as when the RT preempt patch was created. Is there a tag or a git id or some other way to identify that point?

Thanks!

Frank Rowand
Sony Corporation of America

#82 lore raw

Re: [Announce] 2.6.29-rc78rt1

In reply to Thomas Gleixner
Quoted 5 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

P.S.: ARM/PowerPC support is in the pipeline and will be available with -rt2 (hopefully :)

Do you have a time estimate for -rt2/ARM support, and is there anything that can be done to help (testing, etc).

Thanks,
Cliff

Signature · 7 lines
=======================
Cliff Brake
http://bec-systems.com
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#83 lore raw

Re: [Announce] 2.6.29-rc78rt1

Quoted 8 lines · Cliff Brake
Quoted 5 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

P.S.: ARM/PowerPC support is in the pipeline and will be available with -rt2 (hopefully :)

Do you have a time estimate for -rt2/ARM support, and is there

Time estimate is about: now minus 20sec :)

Quoted 1 line

anything that can be done to help (testing, etc).

Yup, the patches need full testing.

Thanks,

tglx

#84 lore raw

[Announce] 2.6.29-rc8-rt2

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- resurrected ARM and PowerPC support
- tracing fixes for ARM (Uwe Kleine-Koenig)

The support for ARM/PowerPC has only been lightly tested. It might crash and burn your system, make your hair curl, frigthen your cat and give you sleepless nights. You have been warned !

On PowerPC watch out for the following warning:

__do_IRQ called for irq X. PREEMPT_RT will crash your system soon.

__do_IRQ is deprecated and -rt does not support it anymore. Most of the PowerPC subarchitectures do not longer use it, but you might be unlucky and hit one of the remaining users. RT will spit out the message above and then do what it said. :)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt1 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt2.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#85 lore raw

Re: [Announce] 2.6.29-rc8-rt2

Quoted 9 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- resurrected ARM and PowerPC support
- tracing fixes for ARM (Uwe Kleine-Koenig)

The support for ARM/PowerPC has only been lightly tested. It might crash and burn your system, make your hair curl, frigthen your cat and give you sleepless nights. You have been warned !

During a build attempt on powerpc, I am seeing:

In file included from include/linux/mmzone.h:776,

                 from include/linux/gfp.h:5,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:

/root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘numa_cpumask_lookup_table’
In file included from include/linux/topology.h:35,

                 from include/linux/gfp.h:8,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:

/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function ‘node_to_cpumask’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function) /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
(Each undeclared identifier is reported only once /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
for each function it appears in.) /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function ‘node_to_first_cpu’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function) make[1]: *** [init/do_mounts_rd.o] Error 1
make[1]: *** Waiting for unfinished jobs....

I have locally fixed by adding an include just above the cpumask_t reference. The include may belong elsewhere, but in case I got it right,.. :-)

--

(quoted diff) +0 -0

b/arch/powerpc/include/asm/mmzone.h
index 19f299b..530fa41 100644

arch/powerpc/include/asm/mmzone.h +2 -0
@@ -28,6 +28,8 @@ extern struct pglist_data *node_data[];
  * Following are specific to this numa platform.
  */
 
+#include <linux/cpumask.h>
+
 extern int numa_cpu_lookup_table[];
 extern cpumask_t numa_cpumask_lookup_table[];
 #ifdef CONFIG_MEMORY_HOTPLUG

Thanks,
-Will

Quoted 28 lines

On PowerPC watch out for the following warning:

__do_IRQ called for irq X. PREEMPT_RT will crash your system soon.

__do_IRQ is deprecated and -rt does not support it anymore. Most of the PowerPC subarchitectures do not longer use it, but you might be unlucky and hit one of the remaining users. RT will spit out the message above and then do what it said. :)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt1 tree, the following patches should be applied:

http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt2.bz2

The broken out patches are also available at the same download locations.

Quoted 8 lines

Enjoy !

tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#86 lore raw

Re: [Announce] 2.6.29-rc8-rt2

Quoted 51 lines · Will Schmidt
Quoted 9 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- resurrected ARM and PowerPC support
- tracing fixes for ARM (Uwe Kleine-Koenig)

The support for ARM/PowerPC has only been lightly tested. It might crash and burn your system, make your hair curl, frigthen your cat and give you sleepless nights. You have been warned !

During a build attempt on powerpc, I am seeing:

In file included from include/linux/mmzone.h:776,

                 from include/linux/gfp.h:5,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:

/root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘numa_cpumask_lookup_table’
In file included from include/linux/topology.h:35,

                 from include/linux/gfp.h:8,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:

/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function ‘node_to_cpumask’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function) /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
(Each undeclared identifier is reported only once /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
for each function it appears in.) /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function ‘node_to_first_cpu’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function) make[1]: *** [init/do_mounts_rd.o] Error 1
make[1]: *** Waiting for unfinished jobs....

Quoted 5 lines

I have locally fixed by adding an include just above the cpumask_t reference. The include may belong elsewhere, but in case I got it right,.. :-)

you got it right :-) The full fix (the bug also affects sparc) is already queued up - see it below.

Ingo

-------------->
From 0c7e5b187fc599a40c1e6392926424d26cd0cf41 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <[email protected]>
Date: Thu, 19 Mar 2009 22:03:22 +1100
Subject: [PATCH] numa, cpumask: move numa_node_id default implementation to topology.h, fix

Impact: build fix for powerpc and sparc

Today's linux-next build (powerpc allyesconfig) failed like this:

Quoted 6 lines

In file included from include/linux/mmzone.h:776,

                 from include/linux/gfp.h:5,
                 from include/linux/kmod.h:23,
                 from include/linux/module.h:14,
                 from init/version.c:11:

arch/powerpc/include/asm/mmzone.h:32: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'numa_cpumask_lookup_table'

Caused by commit 082edb7bf443eb8eda15b482d16ad9dd8137ad24 ("numa,
cpumask: move numa_node_id default implementation to topology.h") from the cpus4096 tree which removed the include of linux/topology.h from linux/mmzone.h.

Same for sparc64 defconfig.

Acked-b: Rusty Russell <[email protected]>
Cc: ppc-dev <[email protected]>
LKML-Reference: <[email protected]>

---
 arch/powerpc/include/asm/mmzone.h |    1 +
 arch/sparc/include/asm/mmzone.h   |    2 ++
 2 files changed, 3 insertions(+), 0 deletions(-)
arch/powerpc/include/asm/mmzone.h +1 -0
index 19f299b..35acac9 100644
@@ -8,6 +8,7 @@
 #define _ASM_MMZONE_H_
 #ifdef __KERNEL__
 
+#include <linux/cpumask.h>
 
 /*
  * generic non-linear memory support:
arch/sparc/include/asm/mmzone.h +2 -0
index ebf5986..e8c6487 100644
@@ -3,6 +3,8 @@
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
 
+#include <linux/cpumask.h>
+
 extern struct pglist_data *node_data[];
 
 #define NODE_DATA(nid)		(node_data[nid])

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#87 lore raw

[Announce] 2.6.29-rc8-rt3

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a x86 32bit PAE pagetable corruption caused by a hard to trigger race.

- update to latest linus and tip

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt3 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#88 lore raw

Re: [Announce] 2.6.29-rc8-rt3

Quoted 15 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a x86 32bit PAE pagetable corruption caused by a hard to trigger race.

- update to latest linus and tip

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

Quoted 7 lines

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt3 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2

Hi,

It doesn't seem to be available (404).
But I can see a 2.6.29-rc8-rt4.bz2 downloadable.

Thanks.

Quoted 10 lines

The broken out patches are also available at the same download locations.

Enjoy !

tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#89 lore raw

Re: [Announce] 2.6.29-rc8-rt3

Hi,

Quoted 10 lines
Quoted 2 lines
    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2

Hi,

It doesn't seem to be available (404).
But I can see a 2.6.29-rc8-rt4.bz2 downloadable.

Thanks.

This is a channel log from #linux-rt

19:57 < clark|w> tglx, just how small was the -rt3 window (which I hit btw)? 19:58 < tglx> you mean how long -rt3 was up on the web ?
19:58 < clark|w> yeah
19:58 < tglx> half an hour or so
19:59 < clark|w> because I got it, built/booted it (64-bit) and was running it
up til thismorning when I saw that you'd released -rt4 :)
19:59 < tglx> 64bit was fine
19:59 < tglx> I fixed a 32bit PAE bug in -rt2 and when I pushed out -rt3 I did
not notice that half of the fix was lost
20:00 < tglx> so I zapped it and pushed out rt4
20:00 < clark|w> cool
20:00 < clark|w> good think I'm 64bit clean :)
20:00 < tglx> but I was too tired to send out another mail

Just FYI
Uwe

Signature · 6 lines
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#90 lore raw

[Announce] 2.6.29-rt1

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- port forward to 2.6.29 final

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#91 lore raw

Re: [Announce] 2.6.29-rt1

Quoted 10 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- port forward to 2.6.29 final

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Quoted 8 lines

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2

Is this valid ?

--
JSR

#92 lore raw

Re: [Announce] 2.6.29-rt1

Quoted 13 lines · Jaswinder Singh Rajput
Quoted 12 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- port forward to 2.6.29 final

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

Quoted 8 lines
Quoted 6 lines

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2

Is this valid ?

If we remove the testing/ it should work better :)

tglx

#93 lore raw

Re: [Announce] 2.6.29-rt1

Hi,

I understood statement that Thosmas explained about invalid access of 2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory (./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
(If linux version is RC[release candidate] version,
use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in cat ../patches/series | grep patch | grep -v "#" ;do echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config fc9#> make menuconfig

        ..... Below Omission .....

Regards,
GeunSik Lim

2009/3/26 Thomas Gleixner <[email protected]>:

Quoted 24 lines · Jaswinder Singh Rajput
Quoted 14 lines · Thomas Gleixner
Quoted 12 lines

We are pleased to announce the next update to our new preempt-rt series.

     - port forward to 2.6.29 final

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

Quoted 8 lines
Quoted 6 lines

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2

Is this valid ?

Quoted 9 lines

If we remove the testing/ it should work better :)

  tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

--
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#94 lore raw

Re: [Announce] 2.6.29-rt1

In reply to Thomas Gleixner

Hi,

I understood statement that Thosmas explained about invalid access of 2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory (./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
(If linux version is RC[release candidate] version,
use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in cat ../patches/series | grep patch | grep -v "#" ;do echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config fc9#> make menuconfig

        ..... Below Omission .....

Regards,
GeunSik Lim

2009/3/26 Thomas Gleixner <[email protected]>:

Quoted 24 lines · Jaswinder Singh Rajput
Quoted 14 lines · Thomas Gleixner
Quoted 12 lines

We are pleased to announce the next update to our new preempt-rt series.

     - port forward to 2.6.29 final

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

Quoted 8 lines
Quoted 6 lines

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2

Is this valid ?

Quoted 9 lines

If we remove the testing/ it should work better :)

  tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#95 lore raw

Re: [Announce] 2.6.29-rt1

In reply to Thomas Gleixner
Quoted 6 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

Enjoy !

tglx

Thankx!

Is there also an announce mailinglist? Would be good imho. So people can subscribe.

\r

#96 lore raw

[Announce] 2.6.29-rt2

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a fork/exit bug in the signal per task cache (/me puts on a huge brown paper bag - Thanks to Phillipe Reynes and Will Schmidt for reporting and testing)

- fix a group scheduling migration accounting bug (decoded with and fixed by Peter Zijlstra - reported by Robin Gareus)

- tlb gather rework by Peter Zijlstra - Thanks Peter !

- the usual fixlets

The tlb rework might be incomplete on some of the uncountable incarnations of PowerPC and ARM platforms, so look out for wreckage and keep the usual tools (fire-extinguishers, brooms, buckets etc.) handy.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt2 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt2.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#97 lore raw

Re: [Announce] 2.6.29-rt2

Quoted 10 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a fork/exit bug in the signal per task cache (/me puts on a huge brown paper bag - Thanks to Phillipe Reynes and Will Schmidt for reporting and testing)

- fix a group scheduling migration accounting bug (decoded with and fixed by Peter Zijlstra - reported by Robin Gareus)

Quoted 8 lines

- tlb gather rework by Peter Zijlstra - Thanks Peter !

- the usual fixlets

The tlb rework might be incomplete on some of the uncountable incarnations of PowerPC and ARM platforms, so look out for wreckage and keep the usual tools (fire-extinguishers, brooms, buckets etc.) handy.

I can confirm that the tlb rework does appear to be missing some parts for Power. (Using 2.6.29-rt3 on pseries ppc64)

arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to `per_cpu__ppc64_tlb_batch'
<...>
mm/built-in.o:(.toc1+0xed0): more undefined references to `per_cpu__ppc64_tlb_batch' follow

Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
or if the tlb rework is more involved. So, I will patiently remain
tuned in. :-)

Thanks,
-Will

#98 lore raw

Re: [Announce] 2.6.29-rt2

Quoted 29 lines · Will Schmidt
Quoted 10 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a fork/exit bug in the signal per task cache (/me puts on a huge brown paper bag - Thanks to Phillipe Reynes and Will Schmidt for reporting and testing)

- fix a group scheduling migration accounting bug (decoded with and fixed by Peter Zijlstra - reported by Robin Gareus)

Quoted 8 lines

- tlb gather rework by Peter Zijlstra - Thanks Peter !

- the usual fixlets

The tlb rework might be incomplete on some of the uncountable incarnations of PowerPC and ARM platforms, so look out for wreckage and keep the usual tools (fire-extinguishers, brooms, buckets etc.) handy.

I can confirm that the tlb rework does appear to be missing some parts for Power. (Using 2.6.29-rt3 on pseries ppc64)

arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to `per_cpu__ppc64_tlb_batch'
<...>
mm/built-in.o:(.toc1+0xed0): more undefined references to `per_cpu__ppc64_tlb_batch' follow

Quoted 4 lines

Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
or if the tlb rework is more involved. So, I will patiently remain
tuned in. :-)

No, the DEFINE_PER_CPU was removed accidentaly. Should have stayed there

Thanks,

tglx

--------

arch/powerpc/mm/tlb_hash64.c +2 -0
Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
===================================================================
@@ -32,6 +32,8 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 
+DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush
#99 lore raw

Re: [Announce] 2.6.29-rt2

Quoted 36 lines · Thomas Gleixner
Quoted 29 lines · Will Schmidt
Quoted 10 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- fix a fork/exit bug in the signal per task cache (/me puts on a huge brown paper bag - Thanks to Phillipe Reynes and Will Schmidt for reporting and testing)

- fix a group scheduling migration accounting bug (decoded with and fixed by Peter Zijlstra - reported by Robin Gareus)

Quoted 8 lines

- tlb gather rework by Peter Zijlstra - Thanks Peter !

- the usual fixlets

The tlb rework might be incomplete on some of the uncountable incarnations of PowerPC and ARM platforms, so look out for wreckage and keep the usual tools (fire-extinguishers, brooms, buckets etc.) handy.

I can confirm that the tlb rework does appear to be missing some parts for Power. (Using 2.6.29-rt3 on pseries ppc64)

arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to `per_cpu__ppc64_tlb_batch'
<...>
mm/built-in.o:(.toc1+0xed0): more undefined references to `per_cpu__ppc64_tlb_batch' follow

Quoted 4 lines

Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
or if the tlb rework is more involved. So, I will patiently remain
tuned in. :-)

Quoted 5 lines

No, the DEFINE_PER_CPU was removed accidentaly. Should have stayed there

Thanks,

tglx

Thanks for the quick respin.

Panic during boot:
<snip>
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
mice: PS/2 mouse device common for all mice
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Freeing unused kernel memory: 292k freed
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev

Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0x00000c30
cpu 0x3: Vector: 400 (Instruction Access) at [c0000000e8203b00]
    pc: 0000000000000c30
    lr: c0000000000b7d24: .rcu_process_callbacks+0xc0/0xec
    sp: c0000000e8203d80
   msr: 8000000040009032
  current = 0xc0000000e81ff0f0
  paca    = 0xc000000000663800
    pid   = 53, comm = sirq-rcu/3

enter ? for help
[c0000000e8203d80] c0000000000b7d24 .rcu_process_callbacks+0xc0/0xec (unreliable)
[c0000000e8203e10] c000000000070f48 .ksoftirqd+0x208/0x39c [c0000000e8203f00] c000000000085a34 .kthread+0x78/0xc4 [c0000000e8203f90] c000000000029818 .kernel_thread+0x54/0x70 3:mon>
3:mon> r

R00 = c0000000e8480100   R16 = c000000000467280
R01 = c0000000e8203d80   R17 = c000000000465980
R02 = 000000000014ff97   R18 = 0000000000000000
R03 = c0000000e6b6b880   R19 = c0000000e8200000
R04 = 0000000000000001   R20 = c00000000065be58
R05 = c000000000663800   R21 = 0000000000000000
R06 = c0000000e8203cc8   R22 = 0000000000000003
R07 = 0000000000200200   R23 = 0000000000000003
R08 = 0000000000000001   R24 = c000000000663800
R09 = c0000000e6b60eb0   R25 = c000000000696f00
R10 = c000000000538280   R26 = c00000000079e620
R11 = 0000000000000001   R27 = 0000000000000100
R12 = 0000000084000082   R28 = 0000000000000001
R13 = c000000000663800   R29 = c00000000079ea28
R14 = 0000000000000000   R30 = c0000000005d1538
R15 = 0000000002100000   R31 = c0000000e8480100

pc = 0000000000000c30
lr = c0000000000b7d24 .rcu_process_callbacks+0xc0/0xec
msr = 8000000040009032 cr = 24000088
ctr = 0000000000000c31 xer = 0000000020000004 trap = 400

Quoted 16 lines

--------

Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
===================================================================

arch/powerpc/mm/tlb_hash64.c +2 -0
@@ -32,6 +32,8 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 
+DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush
maintainer
#100 lore raw

Re: [Announce] 2.6.29-rt2

Quoted 10 lines · Will Schmidt
Quoted 10 lines

--------

Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
===================================================================

arch/powerpc/mm/tlb_hash64.c +0 -0
@@ -32,6 +32,8 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 
Quoted 5 lines

arch/powerpc/mm/tlb_hash64.c line 39

Quoted 5 lines
arch/powerpc/mm/tlb_hash64.c +2 -0
+DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush

Will, could you see if the below makes your splat go away?

arch/powerpc/include/asm/tlb.h +2 -0
index ec82dac..3ddc8f6 100644
@@ -38,6 +38,8 @@ struct arch_mmu_gather {
 	struct pte_freelist_batch *batch;
 };
 
+#define ARCH_MMU_GATHER_INIT (struct arch_mmu_gather){ .batch = NULL, }
+
 #if !defined(CONFIG_PPC_STD_MMU)
 
 #define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
include/asm-generic/tlb.h +4 -0
index 7f2167e..50a09de 100644
@@ -71,6 +71,10 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m
 		tlb->nr = ~0U;
 
 	tlb->fullmm = full_mm_flush;
+
+#ifdef HAVE_ARCH_MMU_GATHER
+	tlb->arch = ARCH_MMU_GATHER_INIT;
+#endif
 }
 
 static inline void
#101 lore raw

Re: [Announce] 2.6.29-rt2

Quoted 12 lines · Peter Zijlstra
Quoted 10 lines · Will Schmidt
Quoted 10 lines

--------

Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
===================================================================

arch/powerpc/mm/tlb_hash64.c +0 -0
@@ -32,6 +32,8 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 
Quoted 7 lines
Quoted 5 lines

arch/powerpc/mm/tlb_hash64.c line 39

Quoted 5 lines
arch/powerpc/mm/tlb_hash64.c +2 -0
+DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush

Will, could you see if the below makes your splat go away?

It does.. booted clean on a power6 blade with this patch applied.
Thanks. :-)

-Will

Quoted 30 lines
arch/powerpc/include/asm/tlb.h +2 -0
index ec82dac..3ddc8f6 100644
@@ -38,6 +38,8 @@ struct arch_mmu_gather {
 	struct pte_freelist_batch *batch;
 };
 
+#define ARCH_MMU_GATHER_INIT (struct arch_mmu_gather){ .batch = NULL, }
+
 #if !defined(CONFIG_PPC_STD_MMU)
 
 #define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
include/asm-generic/tlb.h +4 -0
index 7f2167e..50a09de 100644
@@ -71,6 +71,10 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m
 		tlb->nr = ~0U;
 
 	tlb->fullmm = full_mm_flush;
+
+#ifdef HAVE_ARCH_MMU_GATHER
+	tlb->arch = ARCH_MMU_GATHER_INIT;
+#endif
 }
 
 static inline void
#102 lore raw

[Announce] 2.6.29.1-rt4

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- rebased to 2.6.29.1

- powerpc64 tlb rework fix by Peter

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt4 tree, the following patches should be applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#103 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 6 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- rebased to 2.6.29.1

- powerpc64 tlb rework fix by Peter

Thanks for cc'ing me...

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

I was also seeing a hard hang when running a java program (with the Fedora 10 open source java) - the swingosc gui component of SuperCollider 3 (a computer music synthesis program). Impossible to know what had failed, machine completely catatonic and nothing left on the logs.

I managed to start the same program _once_ (have not tested again) with 2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The mouse seemed to pause a couple of times and then I killed the program. Restarting it again was successful. Sorry to not have more hard info...

-- Fernando

#104 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 8 lines · Fernando Lopez-Lezcano
Quoted 6 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- rebased to 2.6.29.1

- powerpc64 tlb rework fix by Peter

Quoted 7 lines

Thanks for cc'ing me...

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

No. I have this shutdown/suspend thing on my todo list. Can you send me your .config please ? This happens with the stock -rt kernel or do you have other patches on top of it ?

Quoted 10 lines

I was also seeing a hard hang when running a java program (with the Fedora 10 open source java) - the swingosc gui component of SuperCollider 3 (a computer music synthesis program). Impossible to know what had failed, machine completely catatonic and nothing left on the logs.

I managed to start the same program _once_ (have not tested again) with 2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The mouse seemed to pause a couple of times and then I killed the program. Restarting it again was successful. Sorry to not have more hard info...

Too bad that I can't find my crystal ball :)

Thanks,

tglx

#105 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 11 lines · Thomas Gleixner
Quoted 10 lines · Fernando Lopez-Lezcano
Quoted 6 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- rebased to 2.6.29.1

- powerpc64 tlb rework fix by Peter

Thanks for cc'ing me...

Quoted 7 lines
Quoted 5 lines

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

No. I have this shutdown/suspend thing on my todo list.

Ah, ok. No problem. If it were not for this feature I'd probably release a test version for Planet CCRMA.

Quoted 1 line

Can you send me your .config please ?

Attached.

Quoted 2 lines

This happens with the stock -rt kernel or do
you have other patches on top of it ?

Other patches on top of it. I'm building rpm packages merging the latest Fedora .src.rpm's with rt (as I have been doing for a long long time). I have to have as close a kernel as possible to the Fedora kernels (drivers + configs, within reason - some of the stuff does not patch cleanly of course[*]). The kernel I'm testing is merged with 2.6.29.1-15 / fc10.

Sigh, I know, I know, I have to try to test with the vanilla tree. I don't anticipate having time to do that soon (concert tomorrow, trip starting next week).

Quoted 6 lines
Quoted 6 lines

I was also seeing a hard hang when running a java program (with the Fedora 10 open source java) - the swingosc gui component of SuperCollider 3 (a computer music synthesis program). Impossible to know what had failed, machine completely catatonic and nothing left on the logs.

Quoted 6 lines
Quoted 4 lines

I managed to start the same program _once_ (have not tested again) with 2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The mouse seemed to pause a couple of times and then I killed the program. Restarting it again was successful. Sorry to not have more hard info...

Too bad that I can't find my crystal ball :)

You __have__ one?? Wow. Anyway, it seems that the java problem is gone or something else killed it (another software upgrade perhaps?). Which is good.

Thanks again, looking forward to the next release! -- Fernando

[*] over the years I have tried different approaches and this is the one that has given me kernels that work and are most compatible with the rest of Fedora.

#106 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 10 lines · Fernando Lopez-Lezcano
Quoted 7 lines
Quoted 5 lines

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

No. I have this shutdown/suspend thing on my todo list.

Ah, ok. No problem. If it were not for this feature I'd probably release a test version for Planet CCRMA.

Happens this shutdown/suspend problem every time or is this sporadic ?

Thanks,

tglx

#107 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 7 lines · Thomas Gleixner
Quoted 6 lines · Fernando Lopez-Lezcano
Quoted 6 lines
Quoted 5 lines

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

No. I have this shutdown/suspend thing on my todo list.

Ah, ok. No problem. If it were not for this feature I'd probably release a test version for Planet CCRMA.

Happens this shutdown/suspend problem every time or is this sporadic ?

For me it is repeatable (on both a laptop and a desktop machine so it does not appear to be very hardware specific). It might be of course an interaction with the Fedora patches I use.

In the category of "I wish I had a crystal ball" reports with no hard data, I can confirm that my build of rt4 does hang. I was trying 2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a hard hang I reverted to the vanilla Fedora kernel (which is what I had been using because of that problem - no clues left behind in logs).

-- Fernando

[*] a T61 lenovo laptop with intel graphics running jack 1.9.1, linuxsampler, supercollider with two instances of the synthesis engine doing both audio and midi processing, a convolution reverb using jconv, ambisonics decoding through two instances of ambdec and the java based swingosc supercollider gui. Very loaded.

#108 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 19 lines · Fernando Lopez-Lezcano
Quoted 7 lines · Thomas Gleixner
Quoted 6 lines · Fernando Lopez-Lezcano
Quoted 6 lines
Quoted 5 lines

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

No. I have this shutdown/suspend thing on my todo list.

Ah, ok. No problem. If it were not for this feature I'd probably release a test version for Planet CCRMA.

Happens this shutdown/suspend problem every time or is this sporadic ?

For me it is repeatable (on both a laptop and a desktop machine so it does not appear to be very hardware specific). It might be of course an interaction with the Fedora patches I use.

Quoted 5 lines

In the category of "I wish I had a crystal ball" reports with no hard data, I can confirm that my build of rt4 does hang. I was trying 2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a hard hang I reverted to the vanilla Fedora kernel (which is what I had been using because of that problem - no clues left behind in logs).

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Thanks,

tglx

#109 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 20 lines · Thomas Gleixner
Quoted 19 lines · Fernando Lopez-Lezcano
Quoted 7 lines · Thomas Gleixner
Quoted 6 lines · Fernando Lopez-Lezcano
Quoted 6 lines
Quoted 5 lines

Just a heads up. I'm still having shutdown/suspend problems with this release as before (I had not reported the suspend problem, I think - machine hangs and has to be power cycled). Booting with "noreplace-smp" fixes both. Is this something I could disable through configuration options?

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

No. I have this shutdown/suspend thing on my todo list.

Ah, ok. No problem. If it were not for this feature I'd probably release a test version for Planet CCRMA.

Happens this shutdown/suspend problem every time or is this sporadic ?

For me it is repeatable (on both a laptop and a desktop machine so it does not appear to be very hardware specific). It might be of course an interaction with the Fedora patches I use.

Quoted 8 lines
Quoted 5 lines

In the category of "I wish I had a crystal ball" reports with no hard data, I can confirm that my build of rt4 does hang. I was trying 2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a hard hang I reverted to the vanilla Fedora kernel (which is what I had been using because of that problem - no clues left behind in logs).

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

(the one I have tested and hangs is the i386 PAE version) Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

(if you don't want to figure out the .src.rpm - I would not blame you - I can give you a list of the patches that were actually applied - of the ones that are included in the package)

-- Fernando

#110 lore raw

Re: [Announce] 2.6.29.1-rt4

Fernando,

Quoted 9 lines · Fernando Lopez-Lezcano
Quoted 2 lines

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

Quoted 8 lines

(the one I have tested and hangs is the i386 PAE version) Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

(if you don't want to figure out the .src.rpm - I would not blame you - I can give you a list of the patches that were actually applied - of the ones that are included in the package)

No problem. I know how to distangle those beasts.

Still I have no reproducer yet. One of my 32bit test machines survived a 200 cycle test w/o showing it.

Is there anything special what you run, load ... ?

Looks like I need to add a 32bit install to my T61 in the hope to reproduce.

Thanks,

tglx

#111 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 17 lines · Thomas Gleixner

Fernando,

Quoted 14 lines · Fernando Lopez-Lezcano
Quoted 2 lines

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

(the one I have tested and hangs is the i386 PAE version) Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

Quoted 8 lines
Quoted 3 lines

(if you don't want to figure out the .src.rpm - I would not blame you - I can give you a list of the patches that were actually applied - of the ones that are included in the package)

No problem. I know how to distangle those beasts.

Still I have no reproducer yet. One of my 32bit test machines survived a 200 cycle test w/o showing it.

Arghh, I don't know what it could be then. You mean 200 power cycles?? Wow... it only takes one here. Thanks for testing.

Quoted 1 line

Is there anything special what you run, load ... ?

Not that I can think of right now. This happens on 32 bit installs on both Fedora 9 and Fedora 10. Nothing special installed, of course I have the Planet CCRMA packages but they don't involve additional kernel modules or anything that (I think) deals with startup or shutdown.

Quoted 2 lines

Looks like I need to add a 32bit install to my T61 in the hope to reproduce.

Sorry for the inconvenience. Additional installs, argh (BTW, I won't be reading email for at least a week, of to LAC2009 tomorrow with a week of R&R before - please keep cc'ing me on rt stuff).

Thanks!!!
-- Fernando

#112 lore raw

Re: [Announce] 2.6.29.1-rt4

Fernando,

Quoted 22 lines · Fernando Lopez-Lezcano
Quoted 21 lines · Thomas Gleixner

Fernando,

Quoted 17 lines · Fernando Lopez-Lezcano
Quoted 2 lines

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

(the one I have tested and hangs is the i386 PAE version) Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

(if you don't want to figure out the .src.rpm - I would not blame you - I can give you a list of the patches that were actually applied - of the ones that are included in the package)

Quoted 7 lines
Quoted 4 lines

No problem. I know how to distangle those beasts.

Still I have no reproducer yet. One of my 32bit test machines survived a 200 cycle test w/o showing it.

Arghh, I don't know what it could be then. You mean 200 power cycles?? Wow... it only takes one here. Thanks for testing.

Does it trigger when you just boot up and the immediately shut down w/o doing any work on it ?

Could you try whether the following triggers the bug as well: Boot up, do work or whatever. Make sure your data is sycned to disk. :)

# echo 0 >/sys/devices/system/cpu/cpu1/online

If that does not trigger, then check whether it survives the shutdown/reboot. If it does we look further.

Quoted 6 lines
Quoted 1 line

Is there anything special what you run, load ... ?

Not that I can think of right now. This happens on 32 bit installs on both Fedora 9 and Fedora 10. Nothing special installed, of course I have the Planet CCRMA packages but they don't involve additional kernel modules or anything that (I think) deals with startup or shutdown.

Can you provide the list of modules loaded ?

Thanks,

tglx

#113 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 28 lines · Thomas Gleixner

Fernando,

Quoted 24 lines · Fernando Lopez-Lezcano
Quoted 23 lines · Thomas Gleixner

Fernando,

Quoted 9 lines · Fernando Lopez-Lezcano
Quoted 2 lines

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

Quoted 8 lines

(the one I have tested and hangs is the i386 PAE version) Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

(if you don't want to figure out the .src.rpm - I would not blame you - I can give you a list of the patches that were actually applied - of the ones that are included in the package)

No problem. I know how to distangle those beasts.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Still I have no reproducer yet. One of my 32bit test machines survived a 200 cycle test w/o showing it.

Arghh, I don't know what it could be then. You mean 200 power cycles?? Wow... it only takes one here. Thanks for testing.

Does it trigger when you just boot up and the immediately shut down w/o doing any work on it ?

Yes. Just tried again. Clarification: triggers on a "halt -p", _not_ on a reboot.

Quoted 7 lines

Could you try whether the following triggers the bug as well: Boot up, do work or whatever. Make sure your data is sycned to disk. :)

# echo 0 >/sys/devices/system/cpu/cpu1/online

If that does not trigger, then check whether it survives the shutdown/reboot. If it does we look further.

It triggers it immediately (in my laptop), I tried from a text console and it spews things and at the bottom a poke_text thing like before (after a while I got a couple of messages from iwl3945 about a timeout and somehow it started to reboot, either when I pressed the power button or when I did <ctrl><alt><del>)

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Is there anything special what you run, load ... ?

Not that I can think of right now. This happens on 32 bit installs on both Fedora 9 and Fedora 10. Nothing special installed, of course I have the Planet CCRMA packages but they don't involve additional kernel modules or anything that (I think) deals with startup or shutdown.

Can you provide the list of modules loaded ?

Three lists attached, first all modules after I login, then modules after a single user boot and then two more after I removed bluetooth and 80211* modules on a hunch, fails to power off in all cases (I first saw a ref to blue something at the very top of the dump, so removed that, then saw a reference to 80211 at the top, removed that, then I gave up :-)

-- Fernando

Module                  Size  Used by
fuse                   47992  2 
i915                  131684  2 
drm                   122684  3 i915
i2c_algo_bit            4676  1 i915
rfcomm                 30904  4 
bridge                 40532  0 
stp                     1884  1 bridge
bnep                   10788  2 
sco                     8924  2 
l2cap                  17584  16 rfcomm,bnep
sunrpc                152904  1 
ip6t_REJECT             3148  2 
nf_conntrack_ipv6      11064  2 
ip6table_filter         2164  1 
ip6_tables             10632  1 ip6table_filter
ipv6                  235136  22 ip6t_REJECT,nf_conntrack_ipv6
cpufreq_ondemand        5916  2 
acpi_cpufreq            8304  0 
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  3 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
snd_seq_dummy           2456  0 
arc4                    1532  2 
snd_seq_oss            27444  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            38504  0 
thinkpad_acpi          52544  0 
hwmon                   2160  1 thinkpad_acpi
snd_mixer_oss          14360  1 snd_pcm_oss
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
sdhci_pci               6484  0 
sdhci                  14428  1 sdhci_pci
ecb                     2348  2 
pcspkr                  2080  0 
i2c_i801                8176  0 
i2c_core               17828  4 i915,drm,i2c_algo_bit,i2c_i801
iTCO_wdt               10284  0 
yenta_socket           21404  1 
mmc_core               40752  1 sdhci
iwl3945               123748  0 
rfkill                  8668  4 thinkpad_acpi,iwl3945
mac80211              167760  1 iwl3945
iTCO_vendor_support     2660  1 iTCO_wdt
rsrc_nonstatic         10192  1 yenta_socket
snd_timer              17924  2 snd_seq,snd_pcm
ohci1394               26208  0 
lib80211                4992  1 iwl3945
joydev                  9080  0 
snd                    50516  18 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
cfg80211               31272  2 iwl3945,mac80211
soundcore               5476  1 snd
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ricoh_mmc               3360  0 
btusb                  10716  3 
bluetooth              45472  11 rfcomm,bnep,sco,l2cap,btusb
video                  17132  0 
output                  2436  1 video
e1000e                100600  0 
ata_generic             4240  0 
pata_acpi               3524  0 
Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
arc4                    1532  2 
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ecb                     2348  2 
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
iwl3945               123748  0 
thinkpad_acpi          52544  0 
snd_pcm_oss            38504  0 
snd_mixer_oss          14360  1 snd_pcm_oss
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
sdhci_pci               6484  0 
i2c_i801                8176  0 
hwmon                   2160  1 thinkpad_acpi
rfkill                  8668  4 iwl3945,thinkpad_acpi
yenta_socket           21404  1 
sdhci                  14428  1 sdhci_pci
ohci1394               26208  0 
rsrc_nonstatic         10192  1 yenta_socket
ricoh_mmc               3360  0 
mmc_core               40752  1 sdhci
pcspkr                  2080  0 
i2c_core               17828  1 i2c_i801
mac80211              167760  1 iwl3945
video                  17132  0 
snd_timer              17924  2 snd_seq,snd_pcm
iTCO_wdt               10284  0 
joydev                  9080  0 
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
btusb                  10716  0 
iTCO_vendor_support     2660  1 iTCO_wdt
e1000e                100600  0 
soundcore               5476  1 snd
lib80211                4992  1 iwl3945
output                  2436  1 video
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
cfg80211               31272  2 iwl3945,mac80211
bluetooth              45472  1 btusb
ata_generic             4240  0 
pata_acpi               3524  0 
Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
arc4                    1532  2 
snd_seq_midi_event      5596  1 snd_seq_oss
ecb                     2348  2 
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
thinkpad_acpi          52544  0 
iwl3945               123748  0 
snd_pcm_oss            38504  0 
hwmon                   2160  1 thinkpad_acpi
sdhci_pci               6484  0 
snd_mixer_oss          14360  1 snd_pcm_oss
i2c_i801                8176  0 
sdhci                  14428  1 sdhci_pci
ohci1394               26208  0 
rfkill                  8668  4 thinkpad_acpi,iwl3945
yenta_socket           21404  1 
mmc_core               40752  1 sdhci
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
rsrc_nonstatic         10192  1 yenta_socket
pcspkr                  2080  0 
ricoh_mmc               3360  0 
i2c_core               17828  1 i2c_i801
mac80211              167760  1 iwl3945
iTCO_wdt               10284  0 
joydev                  9080  0 
video                  17132  0 
snd_timer              17924  2 snd_seq,snd_pcm
iTCO_vendor_support     2660  1 iTCO_wdt
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
e1000e                100600  0 
lib80211                4992  1 iwl3945
soundcore               5476  1 snd
cfg80211               31272  2 iwl3945,mac80211
output                  2436  1 video
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ata_generic             4240  0 
pata_acpi               3524  0 
Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
arc4                    1532  0 
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
ecb                     2348  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
thinkpad_acpi          52544  0 
snd_pcm_oss            38504  0 
rfkill                  8668  2 thinkpad_acpi
hwmon                   2160  1 thinkpad_acpi
snd_mixer_oss          14360  1 snd_pcm_oss
pcspkr                  2080  0 
sdhci_pci               6484  0 
i2c_i801                8176  0 
sdhci                  14428  1 sdhci_pci
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
yenta_socket           21404  1 
ohci1394               26208  0 
mmc_core               40752  1 sdhci
joydev                  9080  0 
rsrc_nonstatic         10192  1 yenta_socket
i2c_core               17828  1 i2c_i801
ricoh_mmc               3360  0 
iTCO_wdt               10284  0 
snd_timer              17924  2 snd_seq,snd_pcm
video                  17132  0 
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
iTCO_vendor_support     2660  1 iTCO_wdt
e1000e                100600  0 
output                  2436  1 video
soundcore               5476  1 snd
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ata_generic             4240  0 
pata_acpi               3524  0 
#114 lore raw

Re: [Announce] 2.6.29.1-rt4

In reply to Fernando Lopez-Lezcano
Quoted 18 lines · Fernando Lopez-Lezcano
Quoted 6 lines · Thomas Gleixner

Fernando,

Quoted 3 lines · Fernando Lopez-Lezcano
Quoted 2 lines

Hmm. Can you upload your full patch queue and the binary rpm so I can give it a test ride ?

Quoted 7 lines
Quoted 2 lines

Sure, no problem. I just did a release to planetcore-testing repo (with a warning to the planetccrma list)

No problem. I know how to distangle those beasts.

Still I have no reproducer yet. One of my 32bit test machines survived a 200 cycle test w/o showing it.

Arghh, I don't know what it could be then. You mean 200 power cycles?? Wow... it only takes one here. Thanks for testing.

Quoted 6 lines
Quoted 1 line

Is there anything special what you run, load ... ?

Not that I can think of right now. This happens on 32 bit installs on both Fedora 9 and Fedora 10. Nothing special installed, of course I have the Planet CCRMA packages but they don't involve additional kernel modules or anything that (I think) deals with startup or shutdown.

Maybe I am a special case, somehow:

-------- Forwarded Message --------
From: Timo Sivula
To: [email protected]
Subject: Re: [PlanetCCRMA] for brave users only, kernel 2.6.29.1-rt4 for fc10
Date: Tue, 07 Apr 2009 12:46:41 +0300

ma, 2009-04-06 kello 12:00 -0700, [email protected] kirjoitti:

Quoted 4 lines

I just pushed a new build of 2.6.29.1-rt4 (Thomas Gleixner, one of the gurus working on the rt patches would like to give it a whirl and the easiest way is to put it in planetcore-testing) even though it is not "stable" for me.

Starts and closes fine here with my system. Also has not made my mouse slow, yet. However, neither ndiswrapper 1.53 nor 1.54 does compile with this kernel.

#115 lore raw

Re: [Announce] 2.6.29.1-rt4

In reply to Thomas Gleixner

Dear Thomas,

Quoted 5 lines

The broken out patches are also available at the same download locations.

Enjoy !

Thank you for new release announce.
I am using new version ( linux-2.6.29.1-rt4 ) now .
config file is http://leemgs1.googlecode.com/files/i386.2.6.29.1-rt4.ftrace.config.20090404

I have one question. What is "broken-out" 's meaning for rt patch file?

When I opened realtime patch files for vanilla kernel, I always checked 2 files like belows.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4-broken-out.tar.bz2
<-- collection of seperate files for each patch.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
<-- only one patch file.

What is difference meaning of file-name format
between "patch-2.6.29.1-rt4-broken-out.tar.bz2" and "patch-2.6.29.1-rt4.bz2" ? I have always wondered that.
I am sorry for sending this stupid and easy question.

Thanks,
GeunSik Lim,

2009/4/4 Thomas Gleixner <[email protected]>:

Quoted 34 lines

We are pleased to announce the next update to our new preempt-rt series.

       - rebased to 2.6.29.1

       - powerpc64 tlb rework fix by Peter

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt4 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2

The broken out patches are also available at the same download locations.

Enjoy !

      tglx

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signature · 11 lines
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#116 lore raw

Re: [Announce] 2.6.29.1-rt4

GeunSik,

Quoted 1 line · GeunSik Lim

I have one question. What is "broken-out" 's meaning for rt patch file?

The broken out tar ball contains a patch series of smaller patches, which need to be applied in a give order. The order is determined from the series file. It's a "quilt" series. quilt is a patch series management tool. "man script"

We keep those smaller patches for various reasons:

- It's way easier to move forward to the next kernel version with smaller patches than with a huge all in one patch.

- It's easier to split out functionality from the patches and rework that particular issue and replace the patches in the series

The broken out series is provided for people who want to look into the details of the patches and for preempt-rt developers.

patch-2.6.X-rtY.bz2 is the combination of all patches from the series applied. We provide this as a conveniance for users and testers so they just have to apply one big patch.

Thanks,

tglx

#117 lore raw

Re: [Announce] 2.6.29.1-rt4

Quoted 9 lines · Thomas Gleixner

GeunSik,

Quoted 1 line · GeunSik Lim

I have one question. What is "broken-out" 's meaning for rt patch file?

The broken out tar ball contains a patch series of smaller patches, which need to be applied in a give order. The order is determined from the series file. It's a "quilt" series. quilt is a patch series management tool. "man script"

Of course I meant: man quilt

tglx

#118 lore raw

[Announce] 2.6.29.1-rt5

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- include the futex rework + requeue_pi support (Darren Hart)

The futex changes need profound testing. As we know from prior futex work the best stress tests for the futex interface are RT-Java-VMs especially with enterprise work loads on larger machines. Can the folks who have access to such monstrosities please unleash the beasts and give the futex code a good work out ? Please tell your sysadmin upfront that he should be stand by to fix up the resulting wreckage which might vary from harmless to system replacement.

Unfortunately I was not able to track down the weird 32bit PAE shutdown crash, so the affected users need to stick to the nosmp-alternatives work around for now.

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt5 tree, the following patches should be applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt5.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#119 lore raw

[Announce] 2.6.29.1-rt6

We are pleased to announce the next update to our new preempt-rt series.

- rt locks fixes (Jan Blunck, tglx)
- kvm vs. -rt fixes (Jan Blunck)
- hpet interrupt fix (tglx, reported and tested by Hans Peter Bock)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt6 tree, the following patches should be applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt6.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#120 lore raw

Re: [Announce] 2.6.29.1-rt6

Dear Thomas

Thank you for your notice about new rt patch.
I am running linux-2.6.29.1-rt6 on Q9300 with fedora 9 distribution normally like belows. So I changed version from linux-2.6.29-rt2 to linux-2.6.29.1-rt6.
I will test about a various case with linux-2.6.29.1-rt6 version.

[invain@fedora9 invain]$ uname -a
Linux fedora9 2.6.29.1-rt6-lgs #1 SMP PREEMPT RT Fri Apr 10 10:02:20 KST 2009 i686 i686 i386 GNU/Linux
[invain@fedora9 invain]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2494.087
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4988.17
clflush size : 64
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2494.087
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.23
clflush size : 64
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2494.087
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.24
clflush size : 64
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2494.087
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.28
clflush size : 64
power management:

[invain@fedora9 invain]$ cat /proc/meminfo

MemTotal:        3075816 kB
MemFree:          904416 kB
Buffers:          196168 kB
Cached:          1573864 kB
SwapCached:            0 kB
Active:          1079948 kB
Inactive:         990804 kB
Active(anon):     313180 kB
Inactive(anon):        0 kB
Active(file):     766768 kB
Inactive(file):   990804 kB
Unevictable:        2468 kB
Mlocked:            2468 kB
HighTotal:       2222408 kB
HighFree:         327460 kB
LowTotal:         853408 kB
LowFree:          576956 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:               300 kB
Writeback:             0 kB
AnonPages:        303200 kB
Mapped:            86460 kB
Slab:              65668 kB
SReclaimable:      51816 kB
SUnreclaim:        13852 kB
PageTables:         4568 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1537908 kB
Committed_AS:     719312 kB
VmallocTotal:     122880 kB
VmallocUsed:       45324 kB
VmallocChunk:      50164 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       4096 kB
DirectMap4k:       81912 kB
DirectMap4M:      823296 kB

[invain@fedora9 invain]$ sudo lspci
[sudo] password for invain:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1) 11:07.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 10)
[invain@fedora9 invain]$
[invain@fedora9 invain]$
[invain@fedora9 tracing]$

[invain@fedora9 tracing]$ cd /
[invain@fedora9 /]$ ls /debug/tracing/ -al
합계 0
drwxr-xr-x 6 root root 0 2009-04-10 15:09 .
drwxr-xr-x 8 root root 0 2009-04-10 15:09 ..
-rw-r--r-- 1 root root 0 2009-04-10 15:09 README
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_events -r--r--r-- 1 root root 0 2009-04-10 15:09 available_filter_functions -r--r--r-- 1 root root 0 2009-04-10 15:09 available_tracers -rw-r--r-- 1 root root 0 2009-04-10 15:09 buffer_size_kb -r--r--r-- 1 root root 0 2009-04-10 15:09 current_tracer -r--r--r-- 1 root root 0 2009-04-10 15:09 dyn_ftrace_total_info drwxr-xr-x 5 root root 0 2009-04-10 15:09 events
-r--r--r-- 1 root root 0 2009-04-10 15:09 failures
drwxr-xr-x 2 root root 0 2009-04-10 15:09 options
drwxr-xr-x 6 root root 0 2009-04-10 15:09 per_cpu
-r--r--r-- 1 root root 0 2009-04-10 15:09 printk_formats -rw-r--r-- 1 root root 0 2009-04-10 15:09 set_event
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_filter -rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_notrace -rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_pid -r--r--r-- 1 root root 0 2009-04-10 15:09 set_graph_function -rw-r--r-- 1 root root 0 2009-04-10 15:09 stack_max_size -r--r--r-- 1 root root 0 2009-04-10 15:09 stack_trace -rw-r--r-- 1 root root 0 2009-04-10 15:09 sysprof_sample_period -rw-r--r-- 1 root root 0 2009-04-10 15:09 trace
--w--w---- 1 root root 0 2009-04-10 15:09 trace_marker -rw-r--r-- 1 root root 0 2009-04-10 15:09 trace_options -r--r--r-- 1 root root 0 2009-04-10 15:09 trace_pipe
drwxr-xr-x 2 root root 0 2009-04-10 15:09 trace_stat
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_cpumask -rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_enabled -rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_max_latency -rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_on
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_thresh [invain@fedora9 /]$
[invain@fedora9 /]$
[invain@fedora9 /]$ cat /debug/tracing/available_tracers syscall blk kmemtrace power branch function_graph mmiotrace wakeup_rt wakeup irqsoff function sched_switch initcall nop [invain@fedora9 /]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$ sudo cyclictest -t 10 -b 1000000 --context -D 10 could not set latency_hist/wakeup_latency/reset to 1
0.16 0.20 0.20 1/331 4338

T: 0 ( 4328) P: 0 I:1000 C: 8984 Min: 17 Act:13017 Avg: 8675 Max: 13498
T: 1 ( 4329) P: 0 I:1500 C: 5994 Min: 17 Act: 6048 Avg: 3982 Max: 6190
T: 2 ( 4330) P: 0 I:2000 C: 4498 Min: 17 Act: 2028 Avg: 1196 Max: 2759
T: 3 ( 4331) P: 0 I:2500 C: 3598 Min: 17 Act: 2517 Avg: 1494 Max: 2786
T: 4 ( 4332) P: 0 I:3000 C: 2999 Min: 17 Act: 18 Avg: 25 Max: 514
T: 5 ( 4333) P: 0 I:3500 C: 2571 Min: 17 Act: 18 Avg: 22 Max: 654
T: 6 ( 4334) P: 0 I:4000 C: 2249 Min: 17 Act: 25 Avg: 23 Max: 466
T: 7 ( 4335) P: 0 I:4500 C: 1993 Min: 17 Act:31521 Avg:19809 Max: 33231
T: 8 ( 4336) P: 0 I:5000 C: 1800 Min: 17 Act: 36 Avg: 29 Max: 1095
T: 9 ( 4337) P: 0 I:5500 C: 1636 Min: 17 Act: 29 Avg: 21 Max: 385
[invain@fedora9 tracing]$ tail trace

           gedit-4093  [003] 4154503193.109679:   4093:120:D ==> [003]
 3003:120:R Xorg
            Xorg-3003  [003] 4154503193.109728:   3003:120:D ==> [003]
    0:140:R <idle>
          <idle>-0     [003] 4154503193.110171:      0:140:R   + [003]
 4327:120:D cyclictest
          <idle>-0     [003] 4154503193.110176:      0:140:R ==> [003]
 4327:120:R cyclictest
          <idle>-0     [002] 4154503193.110217:      0:140:R   + [002]
   32: 49:D sirq-timer/2
          <idle>-0     [002] 4154503193.110222:      0:140:R ==> [002]
   32: 49:R sirq-timer/2
    sirq-timer/2-32    [002] 4154503193.110230:     32: 49:D ==> [002]
    0:140:R <idle>
      cyclictest-4327  [003] 4154503193.110344:   4327:120:R   + [003]
   45: 49:D sirq-timer/3
      cyclictest-4327  [003] 4154503193.110349:   4327:120:R ==> [003]
   45: 49:R sirq-timer/3
    sirq-timer/3-45    [003] 4154503193.110355:     45: 49:D ==> [003]

4327:120:R cyclictest
[invain@fedora9 tracing]$

Regards,
GeunSik Lim.

2009/4/10 Thomas Gleixner <[email protected]>:

Quoted 34 lines

We are pleased to announce the next update to our new preempt-rt series.

       - rt locks fixes (Jan Blunck, tglx)
       - kvm vs. -rt fixes (Jan Blunck)
       - hpet interrupt fix (tglx, reported and tested by Hans Peter Bock)

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt6 tree, the following patches should be applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt6.bz2

The broken out patches are also available at the same download locations.

Enjoy !

      tglx

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signature · 11 lines
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#121 lore raw

[Announce] 2.6.29.1-rt7

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- futex testing fallout fix (Darren Hart)
- kvm vs. -rt fix resurrected (tglx)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt7 tree, the following patches should be applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt7.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#122 lore raw

Measuring timer interrupt latency

Hi,

I want to profile the improvements in interrupt latency with and without RT patches.

The approach I have in mind is that time gap between IRQ firing and IRQ handler reading value of counter would be sufficient to reveal the interrupt latency. These values can be analysed for min/max/avg.

Is there any test program which captures interrupt latency (for x86) ? I checked realfeel but it is user mode program and am not sure of its accuracy.

regards,
Suresh

#123 lore raw

Re: Measuring timer interrupt latency

HI Suresh

Quoted 3 lines

Is there any test program which captures interrupt latency (for x86) ? I checked realfeel but it is user mode program and am not sure of its accuracy.

I've posted some code to this list on this 3.3.09 with the subject:
"Latency measurement module". Which does exactly that. ableit with the small problem that the TSC is not in sync on AMD SMP machines.

Regards
Tim

Signature · 1 line
''=~('(?{'.('._@@[~'^'^-)./^').'"'.('}@@~-]@_^__'^'))-^~<.;;-}').',$/})')
#124 lore raw

Re: Measuring timer interrupt latency

In reply to Suresh Kumar SHUKLA

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 9 lines · On Mon, 13 Apr 2009 12:14:42 +0530 Suresh Kumar SHUKLA <[email protected]>…

Hi,

I want to profile the improvements in interrupt latency with and without RT patches.

The approach I have in mind is that time gap between IRQ firing and IRQ handler reading value of counter would be sufficient to reveal the interrupt latency. These values can be analysed for min/max/avg.

Quoted 7 lines

Is there any test program which captures interrupt latency (for x86) ? I checked realfeel but it is user mode program and am not sure of its accuracy.

regards,
Suresh

Have you tried cyclictest? It's part of the rt-tests package that Thomas Gleixner wrote and that I now maintain.

You can pick up the latest tarball here:

http://www.kernel.org/pub/linux//kernel/people/clrkwllms/rt-tests/rt-tests-0.35.tar.bz2

The thing is, I'm not sure how useful measuring the interval between interrupt and ISR. It's such a small component of the total latency value that it usually gets lost in the noise. Cyclictest measures the time between a timer fires and when the user-space program (cyclictest) actually gets to run after a sleep, which is the entire latency value. What you're talking about measuring on RT is basically a lookup and schedule() call, since all interrupts have threaded handlers on RT.

If you are wanting to decompose the latency into it's components on RT, I think you'd have:

1. ISR latency
2. Scheduler latency for IRQ thread
3. IRQ handler time
4. Scheduler latency for user-space thread

Cyclictest measures the aggregate of all these.

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAknjSLEACgkQHyuj/+TTEp1kuACfSi13WaRt6nZDc53LXWqSsbsK Tv0AoJHpeXAjOkCPu5yBMElNDMr3Ij0y
=5LIa
-----END PGP SIGNATURE-----

#125 lore raw

Re: Measuring timer interrupt latency

Hi

Quoted 2 lines

Have you tried cyclictest? It's part of the rt-tests package that Thomas Gleixner wrote and that I now maintain.

I think cyclictest is nice to get some first impressions and i really like it... but it only give the aggregate.

Quoted 3 lines

The thing is, I'm not sure how useful measuring the interval between interrupt and ISR. It's such a small component of the total latency value that it usually gets lost in the noise.

I don't think that you can neglect these numbers in a hard rt environment. As far as i understand, the irq-tasklet has to be scheduled by the kernel.

Quoted 7 lines

If you are wanting to decompose the latency into it's components on RT, I think you'd have:
1. ISR latency
2. Scheduler latency for IRQ thread
3. IRQ handler time
4. Scheduler latency for user-space thread
Cyclictest measures the aggregate of all these.

One good aproach to minimize user mode latency are probably user mode drivers. This approach has been presented at the Embedded in Nürnberg this year by linutronix. So you can shave off #2 of the above list. Which means only one rescheduling runs instead of two. Usermode has of course to be run with rt priority.

Tim

Signature · 5 lines
''=~('(?{'.('._@@[~'^'^-)./^').'"'.('}@@~-]@_^__'^'))-^~<.;;-}').',$/})')
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#126 lore raw

Re: Measuring timer interrupt latency

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 5 lines · On Mon, 13 Apr 2009 18:22:01 +0200 Tim Sander…

Hi

Quoted 2 lines

Have you tried cyclictest? It's part of the rt-tests package that Thomas Gleixner wrote and that I now maintain.

I think cyclictest is nice to get some first impressions and i really like it... but it only give the aggregate.

Well, I think it's more useful than first impressions, but I'm biased :)

Quoted 6 lines
Quoted 4 lines

The thing is, I'm not sure how useful measuring the interval between interrupt and ISR. It's such a small component of the total latency value that it usually gets lost in the noise.

I don't think that you can neglect these numbers in a hard rt environment. As far as i understand, the irq-tasklet has to be scheduled by the kernel.

What I mean is that the latency from interrrupt signal to system ISR is so small that you'd be better off trying to reduce some of the other components to try and reduce total latency.

Of course I don't have any hard numbers on how small the ISR latency is compared to scheduling the IRQ thread and scheduling the user-thread that was waiting for the interrupt event. I wonder if there are any markers already in the RT kernel that would let us measure those components? That way we could argue concrete numbers rather than just abstract ideas.

I'll ask rostedt...

Quoted 8 lines
Quoted 7 lines

If you are wanting to decompose the latency into it's components on RT, I think you'd have:
1. ISR latency
2. Scheduler latency for IRQ thread
3. IRQ handler time
4. Scheduler latency for user-space thread
Cyclictest measures the aggregate of all these.

Quoted 6 lines

One good aproach to minimize user mode latency are probably user mode drivers. This approach has been presented at the Embedded in Nürnberg this year by linutronix. So you can shave off #2 of the above list. Which means only one rescheduling runs instead of two. Usermode has of course to be run with rt priority.

Yeah, but you're limited to polling the h/w at that point. Good if you have a spare core and a high data rate, bad if you're cpu-limited and have a sporadic data rate.

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAknmAW8ACgkQHyuj/+TTEp08DACfYADnFL1BSDfgEr3tZjS8qFGU udMAoKqp2bRO6F/tZOODmEYCzkk0LDFd
=1O2L
-----END PGP SIGNATURE-----

#127 lore raw

RE: Measuring timer interrupt latency

In reply to Clark Williams

Hi Clark,

I already captured cyclictest (0.34) results. Thanks for new version info.

It would be interesting to see the benefits of RT patch in ISR latency (#1) scenarios.
Tim Sander's LMM seems perfectly suitable for this.

regards,
Suresh

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Clark Williams
Sent: Monday, April 13, 2009 7:44 PM
To: Suresh Kumar SHUKLA
Cc: 'rt-users'
Subject: Re: Measuring timer interrupt latency

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 9 lines · On Mon, 13 Apr 2009 12:14:42 +0530 Suresh Kumar SHUKLA <[email protected]>…

Hi,

I want to profile the improvements in interrupt latency with and without RT patches.

The approach I have in mind is that time gap between IRQ firing and IRQ handler reading value of counter would be sufficient to reveal the interrupt latency. These values can be analysed for min/max/avg.

Quoted 7 lines

Is there any test program which captures interrupt latency (for x86) ? I checked realfeel but it is user mode program and am not sure of its accuracy.

regards,
Suresh

Have you tried cyclictest? It's part of the rt-tests package that Thomas Gleixner wrote and that I now maintain.

You can pick up the latest tarball here:

http://www.kernel.org/pub/linux//kernel/people/clrkwllms/rt-tests/rt-tests-0
.35.tar.bz2

The thing is, I'm not sure how useful measuring the interval between interrupt and ISR. It's such a small component of the total latency value that it usually gets lost in the noise. Cyclictest measures the time between a timer fires and when the user-space program (cyclictest) actually gets to run after a sleep, which is the entire latency value.
What you're talking about measuring on RT is basically a lookup and schedule() call, since all interrupts have threaded handlers on RT.

If you are wanting to decompose the latency into it's components on RT, I think you'd have:

1. ISR latency
2. Scheduler latency for IRQ thread
3. IRQ handler time
4. Scheduler latency for user-space thread

Cyclictest measures the aggregate of all these.

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAknjSLEACgkQHyuj/+TTEp1kuACfSi13WaRt6nZDc53LXWqSsbsK Tv0AoJHpeXAjOkCPu5yBMElNDMr3Ij0y
=5LIa
-----END PGP SIGNATURE-----
N
'2flr8yzhXb2X,6G'vX^)^:{.nG+ 7%
{1.[,z;"
X^n r!v&zKkh(h-Z&"x
.G+
ih.(-i ]"j"
z6m'ojdz9^
`~f#"7h'~m

#128 lore raw

[Announce] 2.6.29.1-rt8

In reply to Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- 32bit PAE SMP alternatives crash fixed (mainline fix)
- hrtimer UP deadlock fix (tglx)
- missing fixlets picked from -24/26 (clarkw, acme)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt8 tree, the following patches should be applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt8.bz2

The broken out patches are also available at the same download locations.

Enjoy !

tglx

#129 lore raw

Re: [Announce] 2.6.29.1-rt8

Quoted 19 lines · Thomas Gleixner

We are pleased to announce the next update to our new preempt-rt series.

- 32bit PAE SMP alternatives crash fixed (mainline fix)
- hrtimer UP deadlock fix (tglx)
- missing fixlets picked from -24/26 (clarkw, acme)

Download locations:

http://rt.et.redhat.com/download/
http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt8 tree, the following patches should be applied:

Quoted 7 lines
     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt8.bz2

The broken out patches are also available at the same download locations.

Enjoy !

I really do enjoy this new realtime kernel!
Many many thanks to you and the whole team for your great work from the linuxaudio.org dept.
robin