Terratec Cinergy T USB XXS: remote does not work with 1.20 firmware
Hi.
I am trying to get the remote controller with a Terratec Cinergy T USB XXS. With the firmware dvb-usb-dib0700-1.10.fw, the remote sends codes (not perfectly, but I can see where I am going).
On the other hand, with dvb-usb-dib0700-1.20.fw, the remote does not detect anything. After some tracking, I found that in dib0700_rc_query_v1_20 (from dib0700_devices.c), the status from usb_bulk_msg is always -110 (-ETIMEDOUT).
Is there some way I can help fixing things? I do not mind using the old firmware, but I would like to help improving things.
Regards,
Signature · 1 line
Nicolas George
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 6 lines · Nicolas George
Hi.
I am trying to get the remote controller with a Terratec Cinergy T USB XXS. With the firmware dvb-usb-dib0700-1.10.fw, the remote sends codes (not perfectly, but I can see where I am going).
Quoted 7 lines
On the other hand, with dvb-usb-dib0700-1.20.fw, the remote does not detect anything. After some tracking, I found that in
dib0700_rc_query_v1_20(fromdib0700_devices.c), the status fromusb_bulk_msgis always -110 (-ETIMEDOUT).Is there some way I can help fixing things? I do not mind using the old firmware, but I would like to help improving things.
That's code I wrote, based on information provided by Patrick over at Dibcom.
I would have to look at the code, but if I recall, the code is designed to return -ETIMEDOUT during normal operation when no key press is detected. That said, seeing that return condition should not be perceived as a problem.
Are there any cases where it returns something *other* than -ETIMEDOUT? Because if so, then the keypress is probably being received but not processed properly.
I would recommend you add a line of code to printk() any return condition other than -ETIMEDOUT, and see if something shows up in the log when you try to use the remote control.
Devin
Signature · 3 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller