Add support for the digsy MTC board.
v8 cover Add support for the digsy MTC board.
Version 8:
- use eeprom_read() instead of i2c_read()
Version 7:
- rebased to the 'next' branch to use new function to manipulate ethaddr
- use setbits_be32 and clrbits_be32
- ide changes move to separate patch
Version 6:
- adjusted kernel console variable to use PSC4
(to reflect recent DTS changes)
Version 5:
- removed unnecessary braces
- changed out32/in32 to out_be32/in_be32
Version 4:
- rebased to Ben's FEC changes
Version 3:
- updated (c)
Version 2:
- use I/O accessor functions instead of volatile pointer
- set ethernet address only if not set in environment
- add some comments and some style cleanup
PATCH v8 1/2 mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select. To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by Total5200 and will be used by digsy MTC and other boards with ATA CS on I2C pins.
--- cpu/mpc5xxx/ide.c | 2 +- include/configs/Total5200.h | 1 + 2 files changed, 2 insertions(+), 1 deletions(-)
cpu/mpc5xxx/ide.c +1 -1
@@ -42,7 +42,7 @@ int ide_preinit (void)struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA ; reg = *(vu_long *)MPC5XXX_GPS_PORT_CONFIG ; -#if defined(CONFIG_TOTAL5200 ) +#if defined(CONFIG_SYS_ATA_CS_ON_I2C2 )/* ATA cs0/1 on i2c2 clk/io */ reg = (reg & ~0x03000000ul ) |0x02000000ul ;#else
include/configs/Total5200.h +1 -0
@@ -397,6 +397,7 @@#define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT +#define CONFIG_SYS_ATA_CS_ON_I2C2 #define CONFIG_SYS_IDE_MAXBUS 1/* max. 1 IDE bus */ #define CONFIG_SYS_IDE_MAXDEVICE 1/* max. 1 drive per IDE bus */
Signature · 1 line
1.6.0.6
Wolfgang Denk
AppliedPATCH v8 1/2 mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
Dear Grzegorz Bernacki,
Quoted 11 lines · In message <[email protected]> you wrote:
Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select. To avoid adding board-specific ifdefs to
cpu/mpc5xxx/ide.cnew defineCONFIG_SYS_ATA_CS_ON_I2C2was introduced. It is used by Total5200 and will be used by digsy MTC and other boards with ATA CS on I2C pins.Signed-off-by Grzegorz Bernacki <[email protected]>--- cpu/mpc5xxx/ide.c | 2 +- include/configs/Total5200.h | 1 + 2 files changed, 2 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Nobody trips over mountains. It is the small pebble that causes you to stumble. Pass all the pebbles in your path and you will find you have crossed the mountain.
PATCH v7 2/2 Add support for the digsy MTC board.
In reply to Grzegorz BernackiThis is the InterControl custom device based on the MPC5200B chip.
---
This patch depends on changes done under first patch in the series, because it uses define CONFIG_SYS_ATA_CS_ON_I2C2 introduded in there.
MAKEALL | 1 + Makefile | 16 ++ board/digsy_mtc/Makefile | 32 ++++ board/digsy_mtc/config.mk | 24 +++ board/digsy_mtc/digsy_mtc.c | 307 +++++++++++++++++++++++++++++++++ board/digsy_mtc/eeprom.h | 32 ++++ board/digsy_mtc/is42s16800a-7t.h | 28 +++ include/configs/digsy_mtc.h | 346 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 786 insertions(+), 0 deletions(-) create mode 100644 board/digsy_mtc/Makefile create mode 100644 board/digsy_mtc/config.mk create mode 100644 board/digsy_mtc/digsy_mtc.c create mode 100644 board/digsy_mtc/eeprom.h create mode 100644 board/digsy_mtc/is42s16800a-7t.h create mode 100644 include/configs/digsy_mtc.h
MAKEALL +1 -0
@@ -47,6 +47,7 @@ LIST_5xxx=" \ BC3450 \ cm5200 \ cpci5200 \ + digsy_mtc \ EVAL5200 \ fo300 \ icecube_5100 \
Makefile +16 -0
@@ -527,6 +527,22 @@ cm5200_config: unconfig cpci5200_config: unconfig @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd +digsy_mtc_config \ +digsy_mtc_LOWBOOT_config \ +digsy_mtc_RAMBOOT_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/digsy_mtc + @ >$(obj)include/config.h + @[ -z "$(findstring LOWBOOT_,$@)" ] || \ + { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ + echo "... with LOWBOOT configuration" ; \ + } + @[ -z "$(findstring RAMBOOT_,$@)" ] || \ + { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ + echo "... with RAMBOOT configuration" ; \ + } + @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc + hmi1001_config: unconfig @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
board/digsy_mtc/Makefile new file +32 -0
@@ -0,0 +1,32 @@ + +# +# Author: Grzegorz Bernacki, Semihalf, gjb at semihalf.com +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/digsy_mtc/config.mk new file +24 -0
@@ -0,0 +1,24 @@ +# +# Author: Grzegorz Bernacki, Semihalf, gjb at semihalf.com +# + +# +# digsyMTC board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFF00000 boot high (standard configuration) +# 0xFE000000 boot low +# 0x00100000 boot from RAM (for testing only) +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +## Standard: boot high +TEXT_BASE = 0xFFF00000 +## For testing: boot from RAM +# TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
board/digsy_mtc/digsy_mtc.c new file +307 -0
307 lines not on this page · raw message
board/digsy_mtc/eeprom.h new file +32 -0
@@ -0,0 +1,32 @@ +/* +* (C) Copyright 2009 Semihalf. +* Written by: Grzegorz Bernacki <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the anty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#ifndef CMD_EEPROM_H +#define CMD_EEPROM_H + +#define EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR +#define EEPROM_LEN 1024/* eeprom length */ +#define EEPROM_IDENT 2408/* identification word */ +#define EEPROM_ADDR_IDENT 0/* identification word offset */ +#define EEPROM_ADDR_LEN_SYS 2/* system area lenght offset */ +#define EEPROM_ADDR_LEN_SYSCFG 4/* system config area length offset */ +#define EEPROM_ADDR_ETHADDR 23/* ethernet addres offset */ + +#endif
board/digsy_mtc/is42s16800a-7t.h new file +28 -0
@@ -0,0 +1,28 @@ +/* +* (C) Copyright 2004-2009 +* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x505F0000 +#define SDRAM_CONFIG1 0xD2322900 +#define SDRAM_CONFIG2 0x8AD70000 +
include/configs/digsy_mtc.h new file +346 -0
346 lines not on this page · raw message
Signature · 1 line
1.6.0.6
Wolfgang Denk
AppliedPATCH v7 2/2 Add support for the digsy MTC board.
Dear Grzegorz Bernacki,
Quoted 7 lines · In message <[email protected]> you wrote:
This is the InterControl custom device based on the MPC5200B chip.
Signed-off-by Grzegorz Bernacki <[email protected]>---
This patch depends on changes done under first patch in the series, because it uses defineCONFIG_SYS_ATA_CS_ON_I2C2introduded in there.
Quoted 15 lines
MAKEALL | 1 + Makefile | 16 ++ board/digsy_mtc/Makefile | 32 ++++ board/digsy_mtc/config.mk | 24 +++ board/digsy_mtc/digsy_mtc.c | 307 +++++++++++++++++++++++++++++++++ board/digsy_mtc/eeprom.h | 32 ++++ board/digsy_mtc/is42s16800a-7t.h | 28 +++ include/configs/digsy_mtc.h | 346 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 786 insertions(+), 0 deletions(-) create mode 100644 board/digsy_mtc/Makefile create mode 100644 board/digsy_mtc/config.mk create mode 100644 board/digsy_mtc/digsy_mtc.c create mode 100644 board/digsy_mtc/eeprom.h create mode 100644 board/digsy_mtc/is42s16800a-7t.h create mode 100644 include/configs/digsy_mtc.h
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de IMPORTANT NOTICE TO PURCHASERS: The Entire Physical Universe, Inclu- ding This Product, May One Day Collapse Back into an Infinitesimally Small Space. Should Another Universe Subsequently Re-emerge, the Existence of This Product in That Universe Cannot Be Guaranteed.
PATCH v7 2/2 Add support for the digsy MTC board.
In reply to Grzegorz BernackiDear Grzegorz Bernacki,
Quoted 6 lines · In message <[email protected]> you wrote:
Signed-off-by Grzegorz Bernacki <[email protected]>---
This patch depends on changes done under first patch in the series, because it uses defineCONFIG_SYS_ATA_CS_ON_I2C2introduded in there.
Quoted 15 lines
MAKEALL | 1 + Makefile | 16 ++ board/digsy_mtc/Makefile | 32 ++++ board/digsy_mtc/config.mk | 24 +++ board/digsy_mtc/digsy_mtc.c | 307 +++++++++++++++++++++++++++++++++ board/digsy_mtc/eeprom.h | 32 ++++ board/digsy_mtc/is42s16800a-7t.h | 28 +++ include/configs/digsy_mtc.h | 346 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 786 insertions(+), 0 deletions(-) create mode 100644 board/digsy_mtc/Makefile create mode 100644 board/digsy_mtc/config.mk create mode 100644 board/digsy_mtc/digsy_mtc.c create mode 100644 board/digsy_mtc/eeprom.h create mode 100644 board/digsy_mtc/is42s16800a-7t.h create mode 100644 include/configs/digsy_mtc.h
As mentiuoned, I applied this patch.
I did not mention, that I applied it to the "next" branch (as it would not compile in "master").
But even then, it does not compile cleanly:
+ ./MAKEALL digsy_mtc
Configuring for digsy_mtc board...cpu.c: In function 'ft_cpu_setup':
cpu.c:135: warning: implicit declaration of function 'eth_getenv_enetaddr' main.c: In function 'abortboot':
main.c:122: warning: too few arguments for format
Please provide a patch against "next" (which I will then squash with the original patch...).
Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A bore is someone who persists in holding his own views after we have enlightened him with ours.
PATCH v7 2/2 Add support for the digsy MTC board.
Quoted 4 lines
Please provide a patch against "next" (which I will then squash with the original patch...).
I've just sent patch which fixes compile warnings.
regards,
Grzesiek