minicom garbled
Hi , all
i have one s3c2440 board , the bootloader is "vivi"
and i try to install u-boot 1.1.4 to this board but i get garbled from my minicom :(
then i use "kermit" , the issue was same.
my setting ,
Baudrate : 115200 8N1
Hardware flow Control : NO
Software flow Control : NO
i search the issue from internet , i got solution
change my languages or export LANG_ALL=C
i do these , but the issue still casued.
HOST :
OS : Ubuntu 8.04
Kernel : 2.6.24-23
Target :
QT2440 ARM920T develop board
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22677067.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear SlinceArm,
Quoted 5 lines · In message <[email protected]> you wrote:
i have one s3c2440 board , the bootloader is "vivi"
and i try to install u-boot 1.1.4 to this board but i get garbled from my minicom :(
U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).
Quoted 1 line
Baudrate : 115200 8N1
Maybe that setting is simply wrong?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Conscious is when you are aware of something, and conscience is when you wish you weren't.
Hi , Wolfgang Denk
Thank for your reply : )
Quoted 2 lines
U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).
Ok , i will try to install u-boot-2009-03 in my board
But , is any other setting cause garbled ??
I get some information about my issue form internet .
They say , the issue is caused about my system language
I changed it ( export LANG=C and my minicom character encoding )
But the issue still there .
Quoted 3 lines
Baudrate : 115200 8N1
Quoted 1 line
Maybe that setting is simply wrong?
I refer my board manual , it's 115200 8N1
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22721175.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 17 lines · SlinceArm
Hi , Wolfgang Denk
Thank for your reply : )
Quoted 2 lines
U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).
Ok , i will try to install u-boot-2009-03 in my board
But , is any other setting cause garbled ??
I get some information about my issue form internet .
They say , the issue is caused about my system language
I changed it ( export LANG=C and my minicom character encoding )
Quoted 7 lines
But the issue still there .
Quoted 3 lines
Baudrate : 115200 8N1
Quoted 1 line
Maybe that setting is simply wrong?
I refer my board manual , it's 115200 8N1
Do you know the u-boot you loaded is configured for your board? Another way for garbling is if your board's baud rate generator (clocking) is not what the u-boot that you loaded is configured for, causing it to generate an oddball baud rate.
gvb
Quoted 6 lines
Do you know the u-boot you loaded is configured for your board? Another way for garbling is if your board's baud rate generator (clocking) is not what the u-boot that you loaded is configured for, causing it to generate an oddball baud rate.
Hi , Jerry Van Baren-7
Thanks for your reply
Yes , i am sure my U-boot is configured for my board.
Thanks for your information : )
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22742403.html Sent from the Uboot - Users mailing list archive at Nabble.com.