Skip to contentSkip to conversation

minicom garbled

U-Boot SlinceArm 3 participants 5 messages Mar 24, 2009 – Mar 27, 2009

lore
Share & tools
lore

SlinceArm

author
#0 lore raw

Hi , all

i have one s3c2440 board , the bootloader is "vivi"

and i try to install u-boot 1.1.4 to this board but i get garbled from my minicom :(

then i use "kermit" , the issue was same.

my setting ,

Baudrate : 115200 8N1

Hardware flow Control : NO

Software flow Control : NO

i search the issue from internet , i got solution

change my languages or export LANG_ALL=C

i do these , but the issue still casued.

HOST :

OS : Ubuntu 8.04
Kernel : 2.6.24-23

Target :

QT2440 ARM920T develop board

Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22677067.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw

Dear SlinceArm,

Quoted 5 lines · In message <[email protected]> you wrote:

i have one s3c2440 board , the bootloader is "vivi"

and i try to install u-boot 1.1.4 to this board but i get garbled from my minicom :(

U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).

Quoted 1 line

Baudrate : 115200 8N1

Maybe that setting is simply wrong?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Conscious is when you are aware of something, and conscience is  when
you wish you weren't.
author
#2 lore raw

Hi , Wolfgang Denk

Thank for your reply : )

Quoted 2 lines

U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).

Ok , i will try to install u-boot-2009-03 in my board

But , is any other setting cause garbled ??

I get some information about my issue form internet .

They say , the issue is caused about my system language

I changed it ( export LANG=C and my minicom character encoding )

But the issue still there .

Quoted 3 lines

Baudrate : 115200 8N1

Quoted 1 line

Maybe that setting is simply wrong?

I refer my board manual , it's 115200 8N1

Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22721175.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#3 lore raw
Quoted 17 lines · SlinceArm

Hi , Wolfgang Denk

Thank for your reply : )

Quoted 2 lines

U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is officially unsupported (see the repective entry in the U-Boot manual).

Ok , i will try to install u-boot-2009-03 in my board

But , is any other setting cause garbled ??

I get some information about my issue form internet .

They say , the issue is caused about my system language

I changed it ( export LANG=C and my minicom character encoding )

Quoted 7 lines

But the issue still there .

Quoted 3 lines

Baudrate : 115200 8N1

Quoted 1 line

Maybe that setting is simply wrong?

I refer my board manual , it's 115200 8N1

Do you know the u-boot you loaded is configured for your board? Another way for garbling is if your board's baud rate generator (clocking) is not what the u-boot that you loaded is configured for, causing it to generate an oddball baud rate.

gvb

author
#4 lore raw
Quoted 6 lines

Do you know the u-boot you loaded is configured for your board? Another way for garbling is if your board's baud rate generator (clocking) is not what the u-boot that you loaded is configured for, causing it to generate an oddball baud rate.

Hi , Jerry Van Baren-7

Thanks for your reply

Yes , i am sure my U-boot is configured for my board.

Thanks for your information : )

Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--minicom-garbled-tp22677067p22742403.html
Sent from the Uboot - Users mailing list archive at Nabble.com.