Resume failure: ata3.01: revalidation failed (errno=-2)
Hi,
I tried if I can get reliable suspend to RAM on my new Mac mini Core 2 Duo using 2.6.29, and did a "burn in" test with an endless suspend/resume loop using RTC wakeup. After ~30 attempts, the kernel hangs with a screen full of this message:
ata3.01: revalidation failed (errno=-2)
In the kernel log, I see _one_ occurrence of this message at each resume:
kern.debug: ata3.01: NODEV after polling detection kern.err: ata3.01: revalidation failed (errno=-2)
I tried the same using 2.6.27.20 and got the same, after 52 attempts.
The full kernel log is here:
This is the SATA device:
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
Any hints how I can fix or debug this? It looks like a generic message that only shows that something is wrong in a much deeper layer. Maybe I should add some debugging to ata_dev_revalidate().
Regards,
Tino
Quoted 7 lines · Tino Keitel
Hi,
I tried if I can get reliable suspend to RAM on my new Mac mini Core 2 Duo using 2.6.29, and did a "burn in" test with an endless suspend/resume loop using RTC wakeup. After ~30 attempts, the kernel hangs with a screen full of this message:
Quoted 8 lines
ata3.01: revalidation failed (errno=-2)
In the kernel log, I see _one_ occurrence of this message at each resume:
kern.debug: ata3.01: NODEV after polling detection kern.err: ata3.01: revalidation failed (errno=-2)
I tried the same using 2.6.27.20 and got the same, after 52 attempts.
Can you run this test with the current mainline, please?
Rafael