Skip to contentSkip to conversation

Resume failure: ata3.01: revalidation failed (errno=-2)

DISCUSSION Tino Keitel 2 participants 2 messages Mar 25, 2009 – Apr 5, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I tried if I can get reliable suspend to RAM on my new Mac mini Core 2 Duo using 2.6.29, and did a "burn in" test with an endless suspend/resume loop using RTC wakeup. After ~30 attempts, the kernel hangs with a screen full of this message:

ata3.01: revalidation failed (errno=-2)

In the kernel log, I see _one_ occurrence of this message at each resume:

kern.debug: ata3.01: NODEV after polling detection kern.err: ata3.01: revalidation failed (errno=-2)

I tried the same using 2.6.27.20 and got the same, after 52 attempts.

The full kernel log is here:

http://tikei.de/kernlog.txt

This is the SATA device:

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)

Any hints how I can fix or debug this? It looks like a generic message that only shows that something is wrong in a much deeper layer. Maybe I should add some debugging to ata_dev_revalidate().

Regards,
Tino

#1 lore raw
Quoted 7 lines · Tino Keitel

Hi,

I tried if I can get reliable suspend to RAM on my new Mac mini Core 2 Duo using 2.6.29, and did a "burn in" test with an endless suspend/resume loop using RTC wakeup. After ~30 attempts, the kernel hangs with a screen full of this message:

Quoted 8 lines

ata3.01: revalidation failed (errno=-2)

In the kernel log, I see _one_ occurrence of this message at each resume:

kern.debug: ata3.01: NODEV after polling detection kern.err: ata3.01: revalidation failed (errno=-2)

I tried the same using 2.6.27.20 and got the same, after 52 attempts.

Can you run this test with the current mainline, please?

Rafael